1#! /usr/bin/env perl 2# Copyright 2007-2020 The OpenSSL Project Authors. All Rights Reserved. 3# 4# Licensed under the Apache License 2.0 (the "License"). You may not use 5# this file except in compliance with the License. You can obtain a copy 6# in the file LICENSE in the source distribution or at 7# https://www.openssl.org/source/license.html 8 9# 10# ==================================================================== 11# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL 12# project. The module is, however, dual licensed under OpenSSL and 13# CRYPTOGAMS licenses depending on where you obtain it. For further 14# details see http://www.openssl.org/~appro/cryptogams/. 15# ==================================================================== 16# 17# SHA512 block transform for x86. September 2007. 18# 19# May 2013. 20# 21# Add SSSE3 code path, 20-25% improvement [over original SSE2 code]. 22# 23# Performance in clock cycles per processed byte (less is better): 24# 25# gcc icc x86 asm SIMD(*) x86_64(**) 26# Pentium 100 97 61 - - 27# PIII 75 77 56 - - 28# P4 116 95 82 34.6 30.8 29# AMD K8 54 55 36 20.7 9.57 30# Core2 66 57 40 15.9 9.97 31# Westmere 70 - 38 12.2 9.58 32# Sandy Bridge 58 - 35 11.9 11.2 33# Ivy Bridge 50 - 33 11.5 8.17 34# Haswell 46 - 29 11.3 7.66 35# Skylake 40 - 26 13.3 7.25 36# Bulldozer 121 - 50 14.0 13.5 37# VIA Nano 91 - 52 33 14.7 38# Atom 126 - 68 48(***) 14.7 39# Silvermont 97 - 58 42(***) 17.5 40# Goldmont 80 - 48 19.5 12.0 41# 42# (*) whichever best applicable. 43# (**) x86_64 assembler performance is presented for reference 44# purposes, the results are for integer-only code. 45# (***) paddq is incredibly slow on Atom. 46# 47# IALU code-path is optimized for elder Pentiums. On vanilla Pentium 48# performance improvement over compiler generated code reaches ~60%, 49# while on PIII - ~35%. On newer µ-archs improvement varies from 15% 50# to 50%, but it's less important as they are expected to execute SSE2 51# code-path, which is commonly ~2-3x faster [than compiler generated 52# code]. SSE2 code-path is as fast as original sha512-sse2.pl, even 53# though it does not use 128-bit operations. The latter means that 54# SSE2-aware kernel is no longer required to execute the code. Another 55# difference is that new code optimizes amount of writes, but at the 56# cost of increased data cache "footprint" by 1/2KB. 57 58$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; 59push(@INC,"${dir}","${dir}../../perlasm"); 60require "x86asm.pl"; 61 62$output=pop and open STDOUT,">$output"; 63 64&asm_init($ARGV[0],$ARGV[$#ARGV] eq "386"); 65 66$sse2=0; 67for (@ARGV) { $sse2=1 if (/-DOPENSSL_IA32_SSE2/); } 68 69&external_label("OPENSSL_ia32cap_P") if ($sse2); 70 71$Tlo=&DWP(0,"esp"); $Thi=&DWP(4,"esp"); 72$Alo=&DWP(8,"esp"); $Ahi=&DWP(8+4,"esp"); 73$Blo=&DWP(16,"esp"); $Bhi=&DWP(16+4,"esp"); 74$Clo=&DWP(24,"esp"); $Chi=&DWP(24+4,"esp"); 75$Dlo=&DWP(32,"esp"); $Dhi=&DWP(32+4,"esp"); 76$Elo=&DWP(40,"esp"); $Ehi=&DWP(40+4,"esp"); 77$Flo=&DWP(48,"esp"); $Fhi=&DWP(48+4,"esp"); 78$Glo=&DWP(56,"esp"); $Ghi=&DWP(56+4,"esp"); 79$Hlo=&DWP(64,"esp"); $Hhi=&DWP(64+4,"esp"); 80$K512="ebp"; 81 82$Asse2=&QWP(0,"esp"); 83$Bsse2=&QWP(8,"esp"); 84$Csse2=&QWP(16,"esp"); 85$Dsse2=&QWP(24,"esp"); 86$Esse2=&QWP(32,"esp"); 87$Fsse2=&QWP(40,"esp"); 88$Gsse2=&QWP(48,"esp"); 89$Hsse2=&QWP(56,"esp"); 90 91$A="mm0"; # B-D and 92$E="mm4"; # F-H are commonly loaded to respectively mm1-mm3 and 93 # mm5-mm7, but it's done on on-demand basis... 94$BxC="mm2"; # ... except for B^C 95 96sub BODY_00_15_sse2 { 97 my $phase=shift; 98 99 #&movq ("mm5",$Fsse2); # load f 100 #&movq ("mm6",$Gsse2); # load g 101 102 &movq ("mm1",$E); # %mm1 is sliding right 103 &pxor ("mm5","mm6"); # f^=g 104 &psrlq ("mm1",14); 105 &movq ($Esse2,$E); # modulo-scheduled save e 106 &pand ("mm5",$E); # f&=e 107 &psllq ($E,23); # $E is sliding left 108 &movq ($A,"mm3") if ($phase<2); 109 &movq (&QWP(8*9,"esp"),"mm7") # save X[i] 110 &movq ("mm3","mm1"); # %mm3 is T1 111 &psrlq ("mm1",4); 112 &pxor ("mm5","mm6"); # Ch(e,f,g) 113 &pxor ("mm3",$E); 114 &psllq ($E,23); 115 &pxor ("mm3","mm1"); 116 &movq ($Asse2,$A); # modulo-scheduled save a 117 &paddq ("mm7","mm5"); # X[i]+=Ch(e,f,g) 118 &pxor ("mm3",$E); 119 &psrlq ("mm1",23); 120 &paddq ("mm7",$Hsse2); # X[i]+=h 121 &pxor ("mm3","mm1"); 122 &psllq ($E,4); 123 &paddq ("mm7",QWP(0,$K512)); # X[i]+=K512[i] 124 &pxor ("mm3",$E); # T1=Sigma1_512(e) 125 126 &movq ($E,$Dsse2); # e = load d, e in next round 127 &paddq ("mm3","mm7"); # T1+=X[i] 128 &movq ("mm5",$A); # %mm5 is sliding right 129 &psrlq ("mm5",28); 130 &paddq ($E,"mm3"); # d += T1 131 &movq ("mm6",$A); # %mm6 is sliding left 132 &movq ("mm7","mm5"); 133 &psllq ("mm6",25); 134 &movq ("mm1",$Bsse2); # load b 135 &psrlq ("mm5",6); 136 &pxor ("mm7","mm6"); 137 &sub ("esp",8); 138 &psllq ("mm6",5); 139 &pxor ("mm7","mm5"); 140 &pxor ($A,"mm1"); # a^b, b^c in next round 141 &psrlq ("mm5",5); 142 &pxor ("mm7","mm6"); 143 &pand ($BxC,$A); # (b^c)&(a^b) 144 &psllq ("mm6",6); 145 &pxor ("mm7","mm5"); 146 &pxor ($BxC,"mm1"); # [h=]Maj(a,b,c) 147 &pxor ("mm6","mm7"); # Sigma0_512(a) 148 &movq ("mm7",&QWP(8*(9+16-1),"esp")) if ($phase!=0); # pre-fetch 149 &movq ("mm5",$Fsse2) if ($phase==0); # load f 150 151 if ($phase>1) { 152 &paddq ($BxC,"mm6"); # h+=Sigma0(a) 153 &add ($K512,8); 154 #&paddq ($BxC,"mm3"); # h+=T1 155 156 ($A,$BxC) = ($BxC,$A); # rotate registers 157 } else { 158 &paddq ("mm3",$BxC); # T1+=Maj(a,b,c) 159 &movq ($BxC,$A); 160 &add ($K512,8); 161 &paddq ("mm3","mm6"); # T1+=Sigma0(a) 162 &movq ("mm6",$Gsse2) if ($phase==0); # load g 163 #&movq ($A,"mm3"); # h=T1 164 } 165} 166 167sub BODY_00_15_x86 { 168 #define Sigma1(x) (ROTR((x),14) ^ ROTR((x),18) ^ ROTR((x),41)) 169 # LO lo>>14^hi<<18 ^ lo>>18^hi<<14 ^ hi>>9^lo<<23 170 # HI hi>>14^lo<<18 ^ hi>>18^lo<<14 ^ lo>>9^hi<<23 171 &mov ("ecx",$Elo); 172 &mov ("edx",$Ehi); 173 &mov ("esi","ecx"); 174 175 &shr ("ecx",9); # lo>>9 176 &mov ("edi","edx"); 177 &shr ("edx",9); # hi>>9 178 &mov ("ebx","ecx"); 179 &shl ("esi",14); # lo<<14 180 &mov ("eax","edx"); 181 &shl ("edi",14); # hi<<14 182 &xor ("ebx","esi"); 183 184 &shr ("ecx",14-9); # lo>>14 185 &xor ("eax","edi"); 186 &shr ("edx",14-9); # hi>>14 187 &xor ("eax","ecx"); 188 &shl ("esi",18-14); # lo<<18 189 &xor ("ebx","edx"); 190 &shl ("edi",18-14); # hi<<18 191 &xor ("ebx","esi"); 192 193 &shr ("ecx",18-14); # lo>>18 194 &xor ("eax","edi"); 195 &shr ("edx",18-14); # hi>>18 196 &xor ("eax","ecx"); 197 &shl ("esi",23-18); # lo<<23 198 &xor ("ebx","edx"); 199 &shl ("edi",23-18); # hi<<23 200 &xor ("eax","esi"); 201 &xor ("ebx","edi"); # T1 = Sigma1(e) 202 203 &mov ("ecx",$Flo); 204 &mov ("edx",$Fhi); 205 &mov ("esi",$Glo); 206 &mov ("edi",$Ghi); 207 &add ("eax",$Hlo); 208 &adc ("ebx",$Hhi); # T1 += h 209 &xor ("ecx","esi"); 210 &xor ("edx","edi"); 211 &and ("ecx",$Elo); 212 &and ("edx",$Ehi); 213 &add ("eax",&DWP(8*(9+15)+0,"esp")); 214 &adc ("ebx",&DWP(8*(9+15)+4,"esp")); # T1 += X[0] 215 &xor ("ecx","esi"); 216 &xor ("edx","edi"); # Ch(e,f,g) = (f^g)&e)^g 217 218 &mov ("esi",&DWP(0,$K512)); 219 &mov ("edi",&DWP(4,$K512)); # K[i] 220 &add ("eax","ecx"); 221 &adc ("ebx","edx"); # T1 += Ch(e,f,g) 222 &mov ("ecx",$Dlo); 223 &mov ("edx",$Dhi); 224 &add ("eax","esi"); 225 &adc ("ebx","edi"); # T1 += K[i] 226 &mov ($Tlo,"eax"); 227 &mov ($Thi,"ebx"); # put T1 away 228 &add ("eax","ecx"); 229 &adc ("ebx","edx"); # d += T1 230 231 #define Sigma0(x) (ROTR((x),28) ^ ROTR((x),34) ^ ROTR((x),39)) 232 # LO lo>>28^hi<<4 ^ hi>>2^lo<<30 ^ hi>>7^lo<<25 233 # HI hi>>28^lo<<4 ^ lo>>2^hi<<30 ^ lo>>7^hi<<25 234 &mov ("ecx",$Alo); 235 &mov ("edx",$Ahi); 236 &mov ($Dlo,"eax"); 237 &mov ($Dhi,"ebx"); 238 &mov ("esi","ecx"); 239 240 &shr ("ecx",2); # lo>>2 241 &mov ("edi","edx"); 242 &shr ("edx",2); # hi>>2 243 &mov ("ebx","ecx"); 244 &shl ("esi",4); # lo<<4 245 &mov ("eax","edx"); 246 &shl ("edi",4); # hi<<4 247 &xor ("ebx","esi"); 248 249 &shr ("ecx",7-2); # lo>>7 250 &xor ("eax","edi"); 251 &shr ("edx",7-2); # hi>>7 252 &xor ("ebx","ecx"); 253 &shl ("esi",25-4); # lo<<25 254 &xor ("eax","edx"); 255 &shl ("edi",25-4); # hi<<25 256 &xor ("eax","esi"); 257 258 &shr ("ecx",28-7); # lo>>28 259 &xor ("ebx","edi"); 260 &shr ("edx",28-7); # hi>>28 261 &xor ("eax","ecx"); 262 &shl ("esi",30-25); # lo<<30 263 &xor ("ebx","edx"); 264 &shl ("edi",30-25); # hi<<30 265 &xor ("eax","esi"); 266 &xor ("ebx","edi"); # Sigma0(a) 267 268 &mov ("ecx",$Alo); 269 &mov ("edx",$Ahi); 270 &mov ("esi",$Blo); 271 &mov ("edi",$Bhi); 272 &add ("eax",$Tlo); 273 &adc ("ebx",$Thi); # T1 = Sigma0(a)+T1 274 &or ("ecx","esi"); 275 &or ("edx","edi"); 276 &and ("ecx",$Clo); 277 &and ("edx",$Chi); 278 &and ("esi",$Alo); 279 &and ("edi",$Ahi); 280 &or ("ecx","esi"); 281 &or ("edx","edi"); # Maj(a,b,c) = ((a|b)&c)|(a&b) 282 283 &add ("eax","ecx"); 284 &adc ("ebx","edx"); # T1 += Maj(a,b,c) 285 &mov ($Tlo,"eax"); 286 &mov ($Thi,"ebx"); 287 288 &mov (&LB("edx"),&BP(0,$K512)); # pre-fetch LSB of *K 289 &sub ("esp",8); 290 &lea ($K512,&DWP(8,$K512)); # K++ 291} 292 293 294&function_begin("sha512_block_data_order"); 295 &mov ("esi",wparam(0)); # ctx 296 &mov ("edi",wparam(1)); # inp 297 &mov ("eax",wparam(2)); # num 298 &mov ("ebx","esp"); # saved sp 299 300 &call (&label("pic_point")); # make it PIC! 301&set_label("pic_point"); 302 &blindpop($K512); 303 &lea ($K512,&DWP(&label("K512")."-".&label("pic_point"),$K512)); 304 305 &sub ("esp",16); 306 &and ("esp",-64); 307 308 &shl ("eax",7); 309 &add ("eax","edi"); 310 &mov (&DWP(0,"esp"),"esi"); # ctx 311 &mov (&DWP(4,"esp"),"edi"); # inp 312 &mov (&DWP(8,"esp"),"eax"); # inp+num*128 313 &mov (&DWP(12,"esp"),"ebx"); # saved sp 314 315if ($sse2) { 316 &picmeup("edx","OPENSSL_ia32cap_P",$K512,&label("K512")); 317 &mov ("ecx",&DWP(0,"edx")); 318 &test ("ecx",1<<26); 319 &jz (&label("loop_x86")); 320 321 &mov ("edx",&DWP(4,"edx")); 322 323 # load ctx->h[0-7] 324 &movq ($A,&QWP(0,"esi")); 325 &and ("ecx",1<<24); # XMM registers availability 326 &movq ("mm1",&QWP(8,"esi")); 327 &and ("edx",1<<9); # SSSE3 bit 328 &movq ($BxC,&QWP(16,"esi")); 329 &or ("ecx","edx"); 330 &movq ("mm3",&QWP(24,"esi")); 331 &movq ($E,&QWP(32,"esi")); 332 &movq ("mm5",&QWP(40,"esi")); 333 &movq ("mm6",&QWP(48,"esi")); 334 &movq ("mm7",&QWP(56,"esi")); 335 &cmp ("ecx",1<<24|1<<9); 336 &je (&label("SSSE3")); 337 &sub ("esp",8*10); 338 &jmp (&label("loop_sse2")); 339 340&set_label("loop_sse2",16); 341 #&movq ($Asse2,$A); 342 &movq ($Bsse2,"mm1"); 343 &movq ($Csse2,$BxC); 344 &movq ($Dsse2,"mm3"); 345 #&movq ($Esse2,$E); 346 &movq ($Fsse2,"mm5"); 347 &movq ($Gsse2,"mm6"); 348 &pxor ($BxC,"mm1"); # magic 349 &movq ($Hsse2,"mm7"); 350 &movq ("mm3",$A); # magic 351 352 &mov ("eax",&DWP(0,"edi")); 353 &mov ("ebx",&DWP(4,"edi")); 354 &add ("edi",8); 355 &mov ("edx",15); # counter 356 &bswap ("eax"); 357 &bswap ("ebx"); 358 &jmp (&label("00_14_sse2")); 359 360&set_label("00_14_sse2",16); 361 &movd ("mm1","eax"); 362 &mov ("eax",&DWP(0,"edi")); 363 &movd ("mm7","ebx"); 364 &mov ("ebx",&DWP(4,"edi")); 365 &add ("edi",8); 366 &bswap ("eax"); 367 &bswap ("ebx"); 368 &punpckldq("mm7","mm1"); 369 370 &BODY_00_15_sse2(); 371 372 &dec ("edx"); 373 &jnz (&label("00_14_sse2")); 374 375 &movd ("mm1","eax"); 376 &movd ("mm7","ebx"); 377 &punpckldq("mm7","mm1"); 378 379 &BODY_00_15_sse2(1); 380 381 &pxor ($A,$A); # A is in %mm3 382 &mov ("edx",32); # counter 383 &jmp (&label("16_79_sse2")); 384 385&set_label("16_79_sse2",16); 386 for ($j=0;$j<2;$j++) { # 2x unroll 387 #&movq ("mm7",&QWP(8*(9+16-1),"esp")); # prefetched in BODY_00_15 388 &movq ("mm5",&QWP(8*(9+16-14),"esp")); 389 &movq ("mm1","mm7"); 390 &psrlq ("mm7",1); 391 &movq ("mm6","mm5"); 392 &psrlq ("mm5",6); 393 &psllq ("mm1",56); 394 &paddq ($A,"mm3"); # from BODY_00_15 395 &movq ("mm3","mm7"); 396 &psrlq ("mm7",7-1); 397 &pxor ("mm3","mm1"); 398 &psllq ("mm1",63-56); 399 &pxor ("mm3","mm7"); 400 &psrlq ("mm7",8-7); 401 &pxor ("mm3","mm1"); 402 &movq ("mm1","mm5"); 403 &psrlq ("mm5",19-6); 404 &pxor ("mm7","mm3"); # sigma0 405 406 &psllq ("mm6",3); 407 &pxor ("mm1","mm5"); 408 &paddq ("mm7",&QWP(8*(9+16),"esp")); 409 &pxor ("mm1","mm6"); 410 &psrlq ("mm5",61-19); 411 &paddq ("mm7",&QWP(8*(9+16-9),"esp")); 412 &pxor ("mm1","mm5"); 413 &psllq ("mm6",45-3); 414 &movq ("mm5",$Fsse2); # load f 415 &pxor ("mm1","mm6"); # sigma1 416 &movq ("mm6",$Gsse2); # load g 417 418 &paddq ("mm7","mm1"); # X[i] 419 #&movq (&QWP(8*9,"esp"),"mm7"); # moved to BODY_00_15 420 421 &BODY_00_15_sse2(2); 422 } 423 &dec ("edx"); 424 &jnz (&label("16_79_sse2")); 425 426 #&movq ($A,$Asse2); 427 &paddq ($A,"mm3"); # from BODY_00_15 428 &movq ("mm1",$Bsse2); 429 #&movq ($BxC,$Csse2); 430 &movq ("mm3",$Dsse2); 431 #&movq ($E,$Esse2); 432 &movq ("mm5",$Fsse2); 433 &movq ("mm6",$Gsse2); 434 &movq ("mm7",$Hsse2); 435 436 &pxor ($BxC,"mm1"); # de-magic 437 &paddq ($A,&QWP(0,"esi")); 438 &paddq ("mm1",&QWP(8,"esi")); 439 &paddq ($BxC,&QWP(16,"esi")); 440 &paddq ("mm3",&QWP(24,"esi")); 441 &paddq ($E,&QWP(32,"esi")); 442 &paddq ("mm5",&QWP(40,"esi")); 443 &paddq ("mm6",&QWP(48,"esi")); 444 &paddq ("mm7",&QWP(56,"esi")); 445 446 &mov ("eax",8*80); 447 &movq (&QWP(0,"esi"),$A); 448 &movq (&QWP(8,"esi"),"mm1"); 449 &movq (&QWP(16,"esi"),$BxC); 450 &movq (&QWP(24,"esi"),"mm3"); 451 &movq (&QWP(32,"esi"),$E); 452 &movq (&QWP(40,"esi"),"mm5"); 453 &movq (&QWP(48,"esi"),"mm6"); 454 &movq (&QWP(56,"esi"),"mm7"); 455 456 &lea ("esp",&DWP(0,"esp","eax")); # destroy frame 457 &sub ($K512,"eax"); # rewind K 458 459 &cmp ("edi",&DWP(8*10+8,"esp")); # are we done yet? 460 &jb (&label("loop_sse2")); 461 462 &mov ("esp",&DWP(8*10+12,"esp")); # restore sp 463 &emms (); 464&function_end_A(); 465 466&set_label("SSSE3",32); 467{ my ($cnt,$frame)=("ecx","edx"); 468 my @X=map("xmm$_",(0..7)); 469 my $j; 470 my $i=0; 471 472 &lea ($frame,&DWP(-64,"esp")); 473 &sub ("esp",256); 474 475 # fixed stack frame layout 476 # 477 # +0 A B C D E F G H # backing store 478 # +64 X[0]+K[i] .. X[15]+K[i] # XMM->MM xfer area 479 # +192 # XMM off-load ring buffer 480 # +256 # saved parameters 481 482 &movdqa (@X[1],&QWP(80*8,$K512)); # byte swap mask 483 &movdqu (@X[0],&QWP(0,"edi")); 484 &pshufb (@X[0],@X[1]); 485 for ($j=0;$j<8;$j++) { 486 &movdqa (&QWP(16*(($j-1)%4),$frame),@X[3]) if ($j>4); # off-load 487 &movdqa (@X[3],&QWP(16*($j%8),$K512)); 488 &movdqa (@X[2],@X[1]) if ($j<7); # perpetuate byte swap mask 489 &movdqu (@X[1],&QWP(16*($j+1),"edi")) if ($j<7); # next input 490 &movdqa (@X[1],&QWP(16*(($j+1)%4),$frame)) if ($j==7);# restore @X[0] 491 &paddq (@X[3],@X[0]); 492 &pshufb (@X[1],@X[2]) if ($j<7); 493 &movdqa (&QWP(16*($j%8)-128,$frame),@X[3]); # xfer X[i]+K[i] 494 495 push(@X,shift(@X)); # rotate(@X) 496 } 497 #&jmp (&label("loop_ssse3")); 498 &nop (); 499 500&set_label("loop_ssse3",32); 501 &movdqa (@X[2],&QWP(16*(($j+1)%4),$frame)); # pre-restore @X[1] 502 &movdqa (&QWP(16*(($j-1)%4),$frame),@X[3]); # off-load @X[3] 503 &lea ($K512,&DWP(16*8,$K512)); 504 505 #&movq ($Asse2,$A); # off-load A-H 506 &movq ($Bsse2,"mm1"); 507 &mov ("ebx","edi"); 508 &movq ($Csse2,$BxC); 509 &lea ("edi",&DWP(128,"edi")); # advance input 510 &movq ($Dsse2,"mm3"); 511 &cmp ("edi","eax"); 512 #&movq ($Esse2,$E); 513 &movq ($Fsse2,"mm5"); 514 &cmovb ("ebx","edi"); 515 &movq ($Gsse2,"mm6"); 516 &mov ("ecx",4); # loop counter 517 &pxor ($BxC,"mm1"); # magic 518 &movq ($Hsse2,"mm7"); 519 &pxor ("mm3","mm3"); # magic 520 521 &jmp (&label("00_47_ssse3")); 522 523sub BODY_00_15_ssse3 { # "phase-less" copy of BODY_00_15_sse2 524 ( 525 '&movq ("mm1",$E)', # %mm1 is sliding right 526 '&movq ("mm7",&QWP(((-8*$i)%128)-128,$frame))',# X[i]+K[i] 527 '&pxor ("mm5","mm6")', # f^=g 528 '&psrlq ("mm1",14)', 529 '&movq (&QWP(8*($i+4)%64,"esp"),$E)', # modulo-scheduled save e 530 '&pand ("mm5",$E)', # f&=e 531 '&psllq ($E,23)', # $E is sliding left 532 '&paddq ($A,"mm3")', # [h+=Maj(a,b,c)] 533 '&movq ("mm3","mm1")', # %mm3 is T1 534 '&psrlq("mm1",4)', 535 '&pxor ("mm5","mm6")', # Ch(e,f,g) 536 '&pxor ("mm3",$E)', 537 '&psllq($E,23)', 538 '&pxor ("mm3","mm1")', 539 '&movq (&QWP(8*$i%64,"esp"),$A)', # modulo-scheduled save a 540 '&paddq("mm7","mm5")', # X[i]+=Ch(e,f,g) 541 '&pxor ("mm3",$E)', 542 '&psrlq("mm1",23)', 543 '&paddq("mm7",&QWP(8*($i+7)%64,"esp"))', # X[i]+=h 544 '&pxor ("mm3","mm1")', 545 '&psllq($E,4)', 546 '&pxor ("mm3",$E)', # T1=Sigma1_512(e) 547 548 '&movq ($E,&QWP(8*($i+3)%64,"esp"))', # e = load d, e in next round 549 '&paddq ("mm3","mm7")', # T1+=X[i] 550 '&movq ("mm5",$A)', # %mm5 is sliding right 551 '&psrlq("mm5",28)', 552 '&paddq ($E,"mm3")', # d += T1 553 '&movq ("mm6",$A)', # %mm6 is sliding left 554 '&movq ("mm7","mm5")', 555 '&psllq("mm6",25)', 556 '&movq ("mm1",&QWP(8*($i+1)%64,"esp"))', # load b 557 '&psrlq("mm5",6)', 558 '&pxor ("mm7","mm6")', 559 '&psllq("mm6",5)', 560 '&pxor ("mm7","mm5")', 561 '&pxor ($A,"mm1")', # a^b, b^c in next round 562 '&psrlq("mm5",5)', 563 '&pxor ("mm7","mm6")', 564 '&pand ($BxC,$A)', # (b^c)&(a^b) 565 '&psllq("mm6",6)', 566 '&pxor ("mm7","mm5")', 567 '&pxor ($BxC,"mm1")', # [h=]Maj(a,b,c) 568 '&pxor ("mm6","mm7")', # Sigma0_512(a) 569 '&movq ("mm5",&QWP(8*($i+5-1)%64,"esp"))', # pre-load f 570 '&paddq ($BxC,"mm6")', # h+=Sigma0(a) 571 '&movq ("mm6",&QWP(8*($i+6-1)%64,"esp"))', # pre-load g 572 573 '($A,$BxC) = ($BxC,$A); $i--;' 574 ); 575} 576 577&set_label("00_47_ssse3",32); 578 579 for(;$j<16;$j++) { 580 my ($t0,$t2,$t1)=@X[2..4]; 581 my @insns = (&BODY_00_15_ssse3(),&BODY_00_15_ssse3()); 582 583 &movdqa ($t2,@X[5]); 584 &movdqa (@X[1],$t0); # restore @X[1] 585 &palignr ($t0,@X[0],8); # X[1..2] 586 &movdqa (&QWP(16*($j%4),$frame),@X[4]); # off-load @X[4] 587 &palignr ($t2,@X[4],8); # X[9..10] 588 589 &movdqa ($t1,$t0); 590 &psrlq ($t0,7); 591 &paddq (@X[0],$t2); # X[0..1] += X[9..10] 592 &movdqa ($t2,$t1); 593 &psrlq ($t1,1); 594 &psllq ($t2,64-8); 595 &pxor ($t0,$t1); 596 &psrlq ($t1,8-1); 597 &pxor ($t0,$t2); 598 &psllq ($t2,8-1); 599 &pxor ($t0,$t1); 600 &movdqa ($t1,@X[7]); 601 &pxor ($t0,$t2); # sigma0(X[1..2]) 602 &movdqa ($t2,@X[7]); 603 &psrlq ($t1,6); 604 &paddq (@X[0],$t0); # X[0..1] += sigma0(X[1..2]) 605 606 &movdqa ($t0,@X[7]); 607 &psrlq ($t2,19); 608 &psllq ($t0,64-61); 609 &pxor ($t1,$t2); 610 &psrlq ($t2,61-19); 611 &pxor ($t1,$t0); 612 &psllq ($t0,61-19); 613 &pxor ($t1,$t2); 614 &movdqa ($t2,&QWP(16*(($j+2)%4),$frame));# pre-restore @X[1] 615 &pxor ($t1,$t0); # sigma0(X[1..2]) 616 &movdqa ($t0,&QWP(16*($j%8),$K512)); 617 eval(shift(@insns)); 618 &paddq (@X[0],$t1); # X[0..1] += sigma0(X[14..15]) 619 eval(shift(@insns)); 620 eval(shift(@insns)); 621 eval(shift(@insns)); 622 eval(shift(@insns)); 623 &paddq ($t0,@X[0]); 624 foreach(@insns) { eval; } 625 &movdqa (&QWP(16*($j%8)-128,$frame),$t0);# xfer X[i]+K[i] 626 627 push(@X,shift(@X)); # rotate(@X) 628 } 629 &lea ($K512,&DWP(16*8,$K512)); 630 &dec ("ecx"); 631 &jnz (&label("00_47_ssse3")); 632 633 &movdqa (@X[1],&QWP(0,$K512)); # byte swap mask 634 &lea ($K512,&DWP(-80*8,$K512)); # rewind 635 &movdqu (@X[0],&QWP(0,"ebx")); 636 &pshufb (@X[0],@X[1]); 637 638 for ($j=0;$j<8;$j++) { # load next or same block 639 my @insns = (&BODY_00_15_ssse3(),&BODY_00_15_ssse3()); 640 641 &movdqa (&QWP(16*(($j-1)%4),$frame),@X[3]) if ($j>4); # off-load 642 &movdqa (@X[3],&QWP(16*($j%8),$K512)); 643 &movdqa (@X[2],@X[1]) if ($j<7); # perpetuate byte swap mask 644 &movdqu (@X[1],&QWP(16*($j+1),"ebx")) if ($j<7); # next input 645 &movdqa (@X[1],&QWP(16*(($j+1)%4),$frame)) if ($j==7);# restore @X[0] 646 &paddq (@X[3],@X[0]); 647 &pshufb (@X[1],@X[2]) if ($j<7); 648 foreach(@insns) { eval; } 649 &movdqa (&QWP(16*($j%8)-128,$frame),@X[3]);# xfer X[i]+K[i] 650 651 push(@X,shift(@X)); # rotate(@X) 652 } 653 654 #&movq ($A,$Asse2); # load A-H 655 &movq ("mm1",$Bsse2); 656 &paddq ($A,"mm3"); # from BODY_00_15 657 #&movq ($BxC,$Csse2); 658 &movq ("mm3",$Dsse2); 659 #&movq ($E,$Esse2); 660 #&movq ("mm5",$Fsse2); 661 #&movq ("mm6",$Gsse2); 662 &movq ("mm7",$Hsse2); 663 664 &pxor ($BxC,"mm1"); # de-magic 665 &paddq ($A,&QWP(0,"esi")); 666 &paddq ("mm1",&QWP(8,"esi")); 667 &paddq ($BxC,&QWP(16,"esi")); 668 &paddq ("mm3",&QWP(24,"esi")); 669 &paddq ($E,&QWP(32,"esi")); 670 &paddq ("mm5",&QWP(40,"esi")); 671 &paddq ("mm6",&QWP(48,"esi")); 672 &paddq ("mm7",&QWP(56,"esi")); 673 674 &movq (&QWP(0,"esi"),$A); 675 &movq (&QWP(8,"esi"),"mm1"); 676 &movq (&QWP(16,"esi"),$BxC); 677 &movq (&QWP(24,"esi"),"mm3"); 678 &movq (&QWP(32,"esi"),$E); 679 &movq (&QWP(40,"esi"),"mm5"); 680 &movq (&QWP(48,"esi"),"mm6"); 681 &movq (&QWP(56,"esi"),"mm7"); 682 683 &cmp ("edi","eax") # are we done yet? 684 &jb (&label("loop_ssse3")); 685 686 &mov ("esp",&DWP(64+12,$frame)); # restore sp 687 &emms (); 688} 689&function_end_A(); 690} 691&set_label("loop_x86",16); 692 # copy input block to stack reversing byte and qword order 693 for ($i=0;$i<8;$i++) { 694 &mov ("eax",&DWP($i*16+0,"edi")); 695 &mov ("ebx",&DWP($i*16+4,"edi")); 696 &mov ("ecx",&DWP($i*16+8,"edi")); 697 &mov ("edx",&DWP($i*16+12,"edi")); 698 &bswap ("eax"); 699 &bswap ("ebx"); 700 &bswap ("ecx"); 701 &bswap ("edx"); 702 &push ("eax"); 703 &push ("ebx"); 704 &push ("ecx"); 705 &push ("edx"); 706 } 707 &add ("edi",128); 708 &sub ("esp",9*8); # place for T,A,B,C,D,E,F,G,H 709 &mov (&DWP(8*(9+16)+4,"esp"),"edi"); 710 711 # copy ctx->h[0-7] to A,B,C,D,E,F,G,H on stack 712 &lea ("edi",&DWP(8,"esp")); 713 &mov ("ecx",16); 714 &data_word(0xA5F3F689); # rep movsd 715 716&set_label("00_15_x86",16); 717 &BODY_00_15_x86(); 718 719 &cmp (&LB("edx"),0x94); 720 &jne (&label("00_15_x86")); 721 722&set_label("16_79_x86",16); 723 #define sigma0(x) (ROTR((x),1) ^ ROTR((x),8) ^ ((x)>>7)) 724 # LO lo>>1^hi<<31 ^ lo>>8^hi<<24 ^ lo>>7^hi<<25 725 # HI hi>>1^lo<<31 ^ hi>>8^lo<<24 ^ hi>>7 726 &mov ("ecx",&DWP(8*(9+15+16-1)+0,"esp")); 727 &mov ("edx",&DWP(8*(9+15+16-1)+4,"esp")); 728 &mov ("esi","ecx"); 729 730 &shr ("ecx",1); # lo>>1 731 &mov ("edi","edx"); 732 &shr ("edx",1); # hi>>1 733 &mov ("eax","ecx"); 734 &shl ("esi",24); # lo<<24 735 &mov ("ebx","edx"); 736 &shl ("edi",24); # hi<<24 737 &xor ("ebx","esi"); 738 739 &shr ("ecx",7-1); # lo>>7 740 &xor ("eax","edi"); 741 &shr ("edx",7-1); # hi>>7 742 &xor ("eax","ecx"); 743 &shl ("esi",31-24); # lo<<31 744 &xor ("ebx","edx"); 745 &shl ("edi",25-24); # hi<<25 746 &xor ("ebx","esi"); 747 748 &shr ("ecx",8-7); # lo>>8 749 &xor ("eax","edi"); 750 &shr ("edx",8-7); # hi>>8 751 &xor ("eax","ecx"); 752 &shl ("edi",31-25); # hi<<31 753 &xor ("ebx","edx"); 754 &xor ("eax","edi"); # T1 = sigma0(X[-15]) 755 756 &mov (&DWP(0,"esp"),"eax"); 757 &mov (&DWP(4,"esp"),"ebx"); # put T1 away 758 759 #define sigma1(x) (ROTR((x),19) ^ ROTR((x),61) ^ ((x)>>6)) 760 # LO lo>>19^hi<<13 ^ hi>>29^lo<<3 ^ lo>>6^hi<<26 761 # HI hi>>19^lo<<13 ^ lo>>29^hi<<3 ^ hi>>6 762 &mov ("ecx",&DWP(8*(9+15+16-14)+0,"esp")); 763 &mov ("edx",&DWP(8*(9+15+16-14)+4,"esp")); 764 &mov ("esi","ecx"); 765 766 &shr ("ecx",6); # lo>>6 767 &mov ("edi","edx"); 768 &shr ("edx",6); # hi>>6 769 &mov ("eax","ecx"); 770 &shl ("esi",3); # lo<<3 771 &mov ("ebx","edx"); 772 &shl ("edi",3); # hi<<3 773 &xor ("eax","esi"); 774 775 &shr ("ecx",19-6); # lo>>19 776 &xor ("ebx","edi"); 777 &shr ("edx",19-6); # hi>>19 778 &xor ("eax","ecx"); 779 &shl ("esi",13-3); # lo<<13 780 &xor ("ebx","edx"); 781 &shl ("edi",13-3); # hi<<13 782 &xor ("ebx","esi"); 783 784 &shr ("ecx",29-19); # lo>>29 785 &xor ("eax","edi"); 786 &shr ("edx",29-19); # hi>>29 787 &xor ("ebx","ecx"); 788 &shl ("edi",26-13); # hi<<26 789 &xor ("eax","edx"); 790 &xor ("eax","edi"); # sigma1(X[-2]) 791 792 &mov ("ecx",&DWP(8*(9+15+16)+0,"esp")); 793 &mov ("edx",&DWP(8*(9+15+16)+4,"esp")); 794 &add ("eax",&DWP(0,"esp")); 795 &adc ("ebx",&DWP(4,"esp")); # T1 = sigma1(X[-2])+T1 796 &mov ("esi",&DWP(8*(9+15+16-9)+0,"esp")); 797 &mov ("edi",&DWP(8*(9+15+16-9)+4,"esp")); 798 &add ("eax","ecx"); 799 &adc ("ebx","edx"); # T1 += X[-16] 800 &add ("eax","esi"); 801 &adc ("ebx","edi"); # T1 += X[-7] 802 &mov (&DWP(8*(9+15)+0,"esp"),"eax"); 803 &mov (&DWP(8*(9+15)+4,"esp"),"ebx"); # save X[0] 804 805 &BODY_00_15_x86(); 806 807 &cmp (&LB("edx"),0x17); 808 &jne (&label("16_79_x86")); 809 810 &mov ("esi",&DWP(8*(9+16+80)+0,"esp"));# ctx 811 &mov ("edi",&DWP(8*(9+16+80)+4,"esp"));# inp 812 for($i=0;$i<4;$i++) { 813 &mov ("eax",&DWP($i*16+0,"esi")); 814 &mov ("ebx",&DWP($i*16+4,"esi")); 815 &mov ("ecx",&DWP($i*16+8,"esi")); 816 &mov ("edx",&DWP($i*16+12,"esi")); 817 &add ("eax",&DWP(8+($i*16)+0,"esp")); 818 &adc ("ebx",&DWP(8+($i*16)+4,"esp")); 819 &mov (&DWP($i*16+0,"esi"),"eax"); 820 &mov (&DWP($i*16+4,"esi"),"ebx"); 821 &add ("ecx",&DWP(8+($i*16)+8,"esp")); 822 &adc ("edx",&DWP(8+($i*16)+12,"esp")); 823 &mov (&DWP($i*16+8,"esi"),"ecx"); 824 &mov (&DWP($i*16+12,"esi"),"edx"); 825 } 826 &add ("esp",8*(9+16+80)); # destroy frame 827 &sub ($K512,8*80); # rewind K 828 829 &cmp ("edi",&DWP(8,"esp")); # are we done yet? 830 &jb (&label("loop_x86")); 831 832 &mov ("esp",&DWP(12,"esp")); # restore sp 833&function_end_A(); 834 835&set_label("K512",64); # Yes! I keep it in the code segment! 836 &data_word(0xd728ae22,0x428a2f98); # u64 837 &data_word(0x23ef65cd,0x71374491); # u64 838 &data_word(0xec4d3b2f,0xb5c0fbcf); # u64 839 &data_word(0x8189dbbc,0xe9b5dba5); # u64 840 &data_word(0xf348b538,0x3956c25b); # u64 841 &data_word(0xb605d019,0x59f111f1); # u64 842 &data_word(0xaf194f9b,0x923f82a4); # u64 843 &data_word(0xda6d8118,0xab1c5ed5); # u64 844 &data_word(0xa3030242,0xd807aa98); # u64 845 &data_word(0x45706fbe,0x12835b01); # u64 846 &data_word(0x4ee4b28c,0x243185be); # u64 847 &data_word(0xd5ffb4e2,0x550c7dc3); # u64 848 &data_word(0xf27b896f,0x72be5d74); # u64 849 &data_word(0x3b1696b1,0x80deb1fe); # u64 850 &data_word(0x25c71235,0x9bdc06a7); # u64 851 &data_word(0xcf692694,0xc19bf174); # u64 852 &data_word(0x9ef14ad2,0xe49b69c1); # u64 853 &data_word(0x384f25e3,0xefbe4786); # u64 854 &data_word(0x8b8cd5b5,0x0fc19dc6); # u64 855 &data_word(0x77ac9c65,0x240ca1cc); # u64 856 &data_word(0x592b0275,0x2de92c6f); # u64 857 &data_word(0x6ea6e483,0x4a7484aa); # u64 858 &data_word(0xbd41fbd4,0x5cb0a9dc); # u64 859 &data_word(0x831153b5,0x76f988da); # u64 860 &data_word(0xee66dfab,0x983e5152); # u64 861 &data_word(0x2db43210,0xa831c66d); # u64 862 &data_word(0x98fb213f,0xb00327c8); # u64 863 &data_word(0xbeef0ee4,0xbf597fc7); # u64 864 &data_word(0x3da88fc2,0xc6e00bf3); # u64 865 &data_word(0x930aa725,0xd5a79147); # u64 866 &data_word(0xe003826f,0x06ca6351); # u64 867 &data_word(0x0a0e6e70,0x14292967); # u64 868 &data_word(0x46d22ffc,0x27b70a85); # u64 869 &data_word(0x5c26c926,0x2e1b2138); # u64 870 &data_word(0x5ac42aed,0x4d2c6dfc); # u64 871 &data_word(0x9d95b3df,0x53380d13); # u64 872 &data_word(0x8baf63de,0x650a7354); # u64 873 &data_word(0x3c77b2a8,0x766a0abb); # u64 874 &data_word(0x47edaee6,0x81c2c92e); # u64 875 &data_word(0x1482353b,0x92722c85); # u64 876 &data_word(0x4cf10364,0xa2bfe8a1); # u64 877 &data_word(0xbc423001,0xa81a664b); # u64 878 &data_word(0xd0f89791,0xc24b8b70); # u64 879 &data_word(0x0654be30,0xc76c51a3); # u64 880 &data_word(0xd6ef5218,0xd192e819); # u64 881 &data_word(0x5565a910,0xd6990624); # u64 882 &data_word(0x5771202a,0xf40e3585); # u64 883 &data_word(0x32bbd1b8,0x106aa070); # u64 884 &data_word(0xb8d2d0c8,0x19a4c116); # u64 885 &data_word(0x5141ab53,0x1e376c08); # u64 886 &data_word(0xdf8eeb99,0x2748774c); # u64 887 &data_word(0xe19b48a8,0x34b0bcb5); # u64 888 &data_word(0xc5c95a63,0x391c0cb3); # u64 889 &data_word(0xe3418acb,0x4ed8aa4a); # u64 890 &data_word(0x7763e373,0x5b9cca4f); # u64 891 &data_word(0xd6b2b8a3,0x682e6ff3); # u64 892 &data_word(0x5defb2fc,0x748f82ee); # u64 893 &data_word(0x43172f60,0x78a5636f); # u64 894 &data_word(0xa1f0ab72,0x84c87814); # u64 895 &data_word(0x1a6439ec,0x8cc70208); # u64 896 &data_word(0x23631e28,0x90befffa); # u64 897 &data_word(0xde82bde9,0xa4506ceb); # u64 898 &data_word(0xb2c67915,0xbef9a3f7); # u64 899 &data_word(0xe372532b,0xc67178f2); # u64 900 &data_word(0xea26619c,0xca273ece); # u64 901 &data_word(0x21c0c207,0xd186b8c7); # u64 902 &data_word(0xcde0eb1e,0xeada7dd6); # u64 903 &data_word(0xee6ed178,0xf57d4f7f); # u64 904 &data_word(0x72176fba,0x06f067aa); # u64 905 &data_word(0xa2c898a6,0x0a637dc5); # u64 906 &data_word(0xbef90dae,0x113f9804); # u64 907 &data_word(0x131c471b,0x1b710b35); # u64 908 &data_word(0x23047d84,0x28db77f5); # u64 909 &data_word(0x40c72493,0x32caab7b); # u64 910 &data_word(0x15c9bebc,0x3c9ebe0a); # u64 911 &data_word(0x9c100d4c,0x431d67c4); # u64 912 &data_word(0xcb3e42b6,0x4cc5d4be); # u64 913 &data_word(0xfc657e2a,0x597f299c); # u64 914 &data_word(0x3ad6faec,0x5fcb6fab); # u64 915 &data_word(0x4a475817,0x6c44198c); # u64 916 917 &data_word(0x04050607,0x00010203); # byte swap 918 &data_word(0x0c0d0e0f,0x08090a0b); # mask 919&function_end_B("sha512_block_data_order"); 920&asciz("SHA512 block transform for x86, CRYPTOGAMS by <appro\@openssl.org>"); 921 922&asm_finish(); 923 924close STDOUT or die "error closing STDOUT: $!"; 925
