Name Date Size #Lines LOC

..28-May-2021-

CONFLICTSH A D02-Dec-20205 21

README.mdH A D02-Dec-20201.6 KiB5439

bigtestH A D02-Dec-2020141 117

bug60749.phptH A D02-Dec-2020675 2927

bug64124.phptH A D02-Dec-20201,006 4135

bug64159.phptH A D02-Dec-2020502 2521

bug72479.phptH A D02-Dec-2020738 3634

clean.incH A D02-Dec-202094 53

generic_timeout_error.phptH A D02-Dec-2020651 2722

ipv6.phptH A D02-Dec-2020665 3025

skipif.incH A D02-Dec-2020463 139

snmp-object-errno-errstr.phptH A D02-Dec-20205 KiB148140

snmp-object-error.phptH A D02-Dec-20202.8 KiB109100

snmp-object-properties.phptH A D02-Dec-20203.8 KiB197183

snmp-object-setSecurity_error.phptH A D02-Dec-20202.6 KiB8166

snmp-object.phptH A D02-Dec-20207 KiB246226

snmp2_get.phptH A D02-Dec-20202.8 KiB9985

snmp2_getnext.phptH A D02-Dec-2020870 4036

snmp2_real_walk.phptH A D02-Dec-20202.1 KiB7664

snmp2_set-nomib.phptH A D02-Dec-20201.5 KiB5849

snmp2_set.phptH A D02-Dec-202010.1 KiB260225

snmp2_walk.phptH A D02-Dec-20202.4 KiB8973

snmp3-error.phptH A D02-Dec-20203.2 KiB8266

snmp3.phptH A D02-Dec-20203.9 KiB128116

snmp_get_quick_print.phptH A D02-Dec-2020456 2623

snmp_get_valueretrieval.phptH A D02-Dec-20201.2 KiB4440

snmp_getvalue.phptH A D02-Dec-20202.4 KiB8474

snmp_include.incH A D02-Dec-20201.1 KiB3225

snmp_read_mib.phptH A D02-Dec-2020695 3124

snmp_set_enum_print.phptH A D02-Dec-2020437 2220

snmp_set_oid_output_format.phptH A D02-Dec-2020775 3128

snmpd.confH A D02-Dec-2020744 2818

snmpget.phptH A D02-Dec-20202.8 KiB9683

snmpgetnext.phptH A D02-Dec-2020862 4036

snmprealwalk.phptH A D02-Dec-20202 KiB7664

snmpset-nomib.phptH A D02-Dec-20201.5 KiB5949

snmpset.phptH A D02-Dec-20209.9 KiB251221

snmpwalk.phptH A D02-Dec-20202.4 KiB8973

wrong_hostname.phptH A D02-Dec-2020459 2319

README.md

1# The snmp extension tests
2
3To enable these tests, you must have:
4
5* PHP compiled with SNMP `--with-snmp`
6* An SNMP server running.
7
8## How to test
9
10You need to give credentials with environment vars if default ones are not
11suitable (see `snmp_include.inc` for more info):
12
13```txt
14SNMP_HOSTNAME : IPv4 of remote SNMP agent
15SNMP_HOSTNAME : IPv6 or remote SNMP agent
16SNMP_PORT : SNMP port for queries
17SNMP_COMMUNITY : community name
18SNMP_COMMUNITY_WRITE : community used for write tests (snmpset()).
19SNMP_MIBDIR : Directory containing MIBS
20```
21
22To run test suite you may use this command (presuming that you pwd is where this
23README file is located):
24
25```bash
26make -C ../../.. test TESTS="`cd ../../..; /bin/ls -1 ext/snmp/tests/*.phpt | xargs echo`"
27```
28
29Running `run-tests.php` directly will clear your environment and therefore tests
30will fail if your SNMP configuration does not fit into default values specified
31in `snmp_include.inc`.
32
33## Configuring the SNMPD server
34
35### On Linux/FreeBSD
36
37* On Ubuntu, install `snmpd` and `snmp-mibs-downloader`. (May be `net-snmpd`
38  on other distributions.)
39* Replace config file (by default this is `/etc/snmp/snmpd.conf` on Linux and
40  `/usr/local/etc/snmp/snmpd.conf` on FreeBSD) with `snmpd.conf` supplied.
41
42Before launching daemon make sure that there is no file
43`/var/net-snmp/snmpd.conf`. Delete it if exists. Forgetting to do so will fail
44SNMPv3 tests.
45
46* Place `ext/snmp/tests/bigtest` near `snmpd.conf`, tune path to it in
47  `snmpd.conf`.
48* Launch snmpd (service snmpd start or /etc/init.d/snmpd start). Alternatively
49  you can start snmpd daemon using following command line:
50
51    ```bash
52    sudo snmpd -C -c ./snmpd.conf -f -Le
53    ```
54