1; Start a new pool named 'www'. 2; the variable $pool can be used in any directive and will be replaced by the 3; pool name ('www' here) 4[www] 5 6; Per pool prefix 7; It only applies on the following directives: 8; - 'access.log' 9; - 'slowlog' 10; - 'listen' (unixsocket) 11; - 'chroot' 12; - 'chdir' 13; - 'php_values' 14; - 'php_admin_values' 15; When not set, the global prefix (or @php_fpm_prefix@) applies instead. 16; Note: This directive can also be relative to the global prefix. 17; Default Value: none 18;prefix = /path/to/pools/$pool 19 20; Unix user/group of processes 21; Note: The user is mandatory. If the group is not set, the default user's group 22; will be used. 23user = @php_fpm_user@ 24group = @php_fpm_group@ 25 26; The address on which to accept FastCGI requests. 27; Valid syntaxes are: 28; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific IPv4 address on 29; a specific port; 30; '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on 31; a specific port; 32; 'port' - to listen on a TCP socket to all addresses 33; (IPv6 and IPv4-mapped) on a specific port; 34; '/path/to/unix/socket' - to listen on a unix socket. 35; Note: This value is mandatory. 36listen = 127.0.0.1:9000 37 38; Set listen(2) backlog. 39; Default Value: 511 (-1 on FreeBSD and OpenBSD) 40;listen.backlog = 511 41 42; Set permissions for unix socket, if one is used. In Linux, read/write 43; permissions must be set in order to allow connections from a web server. Many 44; BSD-derived systems allow connections regardless of permissions. 45; Default Values: user and group are set as the running user 46; mode is set to 0660 47;listen.owner = @php_fpm_user@ 48;listen.group = @php_fpm_group@ 49;listen.mode = 0660 50; When POSIX Access Control Lists are supported you can set them using 51; these options, value is a comma separated list of user/group names. 52; When set, listen.owner and listen.group are ignored 53;listen.acl_users = 54;listen.acl_groups = 55 56; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect. 57; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original 58; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address 59; must be separated by a comma. If this value is left blank, connections will be 60; accepted from any ip address. 61; Default Value: any 62;listen.allowed_clients = 127.0.0.1 63 64; Specify the nice(2) priority to apply to the pool processes (only if set) 65; The value can vary from -19 (highest priority) to 20 (lower priority) 66; Note: - It will only work if the FPM master process is launched as root 67; - The pool processes will inherit the master process priority 68; unless it specified otherwise 69; Default Value: no set 70; process.priority = -19 71 72; Set the process dumpable flag (PR_SET_DUMPABLE prctl) even if the process user 73; or group is differrent than the master process user. It allows to create process 74; core dump and ptrace the process for the pool user. 75; Default Value: no 76; process.dumpable = yes 77 78; Choose how the process manager will control the number of child processes. 79; Possible Values: 80; static - a fixed number (pm.max_children) of child processes; 81; dynamic - the number of child processes are set dynamically based on the 82; following directives. With this process management, there will be 83; always at least 1 children. 84; pm.max_children - the maximum number of children that can 85; be alive at the same time. 86; pm.start_servers - the number of children created on startup. 87; pm.min_spare_servers - the minimum number of children in 'idle' 88; state (waiting to process). If the number 89; of 'idle' processes is less than this 90; number then some children will be created. 91; pm.max_spare_servers - the maximum number of children in 'idle' 92; state (waiting to process). If the number 93; of 'idle' processes is greater than this 94; number then some children will be killed. 95; ondemand - no children are created at startup. Children will be forked when 96; new requests will connect. The following parameter are used: 97; pm.max_children - the maximum number of children that 98; can be alive at the same time. 99; pm.process_idle_timeout - The number of seconds after which 100; an idle process will be killed. 101; Note: This value is mandatory. 102pm = dynamic 103 104; The number of child processes to be created when pm is set to 'static' and the 105; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'. 106; This value sets the limit on the number of simultaneous requests that will be 107; served. Equivalent to the ApacheMaxClients directive with mpm_prefork. 108; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP 109; CGI. The below defaults are based on a server without much resources. Don't 110; forget to tweak pm.* to fit your needs. 111; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand' 112; Note: This value is mandatory. 113pm.max_children = 5 114 115; The number of child processes created on startup. 116; Note: Used only when pm is set to 'dynamic' 117; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2 118pm.start_servers = 2 119 120; The desired minimum number of idle server processes. 121; Note: Used only when pm is set to 'dynamic' 122; Note: Mandatory when pm is set to 'dynamic' 123pm.min_spare_servers = 1 124 125; The desired maximum number of idle server processes. 126; Note: Used only when pm is set to 'dynamic' 127; Note: Mandatory when pm is set to 'dynamic' 128pm.max_spare_servers = 3 129 130; The number of seconds after which an idle process will be killed. 131; Note: Used only when pm is set to 'ondemand' 132; Default Value: 10s 133;pm.process_idle_timeout = 10s; 134 135; The number of requests each child process should execute before respawning. 136; This can be useful to work around memory leaks in 3rd party libraries. For 137; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS. 138; Default Value: 0 139;pm.max_requests = 500 140 141; The URI to view the FPM status page. If this value is not set, no URI will be 142; recognized as a status page. It shows the following informations: 143; pool - the name of the pool; 144; process manager - static, dynamic or ondemand; 145; start time - the date and time FPM has started; 146; start since - number of seconds since FPM has started; 147; accepted conn - the number of request accepted by the pool; 148; listen queue - the number of request in the queue of pending 149; connections (see backlog in listen(2)); 150; max listen queue - the maximum number of requests in the queue 151; of pending connections since FPM has started; 152; listen queue len - the size of the socket queue of pending connections; 153; idle processes - the number of idle processes; 154; active processes - the number of active processes; 155; total processes - the number of idle + active processes; 156; max active processes - the maximum number of active processes since FPM 157; has started; 158; max children reached - number of times, the process limit has been reached, 159; when pm tries to start more children (works only for 160; pm 'dynamic' and 'ondemand'); 161; Value are updated in real time. 162; Example output: 163; pool: www 164; process manager: static 165; start time: 01/Jul/2011:17:53:49 +0200 166; start since: 62636 167; accepted conn: 190460 168; listen queue: 0 169; max listen queue: 1 170; listen queue len: 42 171; idle processes: 4 172; active processes: 11 173; total processes: 15 174; max active processes: 12 175; max children reached: 0 176; 177; By default the status page output is formatted as text/plain. Passing either 178; 'html', 'xml' or 'json' in the query string will return the corresponding 179; output syntax. Example: 180; http://www.foo.bar/status 181; http://www.foo.bar/status?json 182; http://www.foo.bar/status?html 183; http://www.foo.bar/status?xml 184; 185; By default the status page only outputs short status. Passing 'full' in the 186; query string will also return status for each pool process. 187; Example: 188; http://www.foo.bar/status?full 189; http://www.foo.bar/status?json&full 190; http://www.foo.bar/status?html&full 191; http://www.foo.bar/status?xml&full 192; The Full status returns for each process: 193; pid - the PID of the process; 194; state - the state of the process (Idle, Running, ...); 195; start time - the date and time the process has started; 196; start since - the number of seconds since the process has started; 197; requests - the number of requests the process has served; 198; request duration - the duration in µs of the requests; 199; request method - the request method (GET, POST, ...); 200; request URI - the request URI with the query string; 201; content length - the content length of the request (only with POST); 202; user - the user (PHP_AUTH_USER) (or '-' if not set); 203; script - the main script called (or '-' if not set); 204; last request cpu - the %cpu the last request consumed 205; it's always 0 if the process is not in Idle state 206; because CPU calculation is done when the request 207; processing has terminated; 208; last request memory - the max amount of memory the last request consumed 209; it's always 0 if the process is not in Idle state 210; because memory calculation is done when the request 211; processing has terminated; 212; If the process is in Idle state, then informations are related to the 213; last request the process has served. Otherwise informations are related to 214; the current request being served. 215; Example output: 216; ************************ 217; pid: 31330 218; state: Running 219; start time: 01/Jul/2011:17:53:49 +0200 220; start since: 63087 221; requests: 12808 222; request duration: 1250261 223; request method: GET 224; request URI: /test_mem.php?N=10000 225; content length: 0 226; user: - 227; script: /home/fat/web/docs/php/test_mem.php 228; last request cpu: 0.00 229; last request memory: 0 230; 231; Note: There is a real-time FPM status monitoring sample web page available 232; It's available in: @EXPANDED_DATADIR@/fpm/status.html 233; 234; Note: The value must start with a leading slash (/). The value can be 235; anything, but it may not be a good idea to use the .php extension or it 236; may conflict with a real PHP file. 237; Default Value: not set 238;pm.status_path = /status 239 240; The ping URI to call the monitoring page of FPM. If this value is not set, no 241; URI will be recognized as a ping page. This could be used to test from outside 242; that FPM is alive and responding, or to 243; - create a graph of FPM availability (rrd or such); 244; - remove a server from a group if it is not responding (load balancing); 245; - trigger alerts for the operating team (24/7). 246; Note: The value must start with a leading slash (/). The value can be 247; anything, but it may not be a good idea to use the .php extension or it 248; may conflict with a real PHP file. 249; Default Value: not set 250;ping.path = /ping 251 252; This directive may be used to customize the response of a ping request. The 253; response is formatted as text/plain with a 200 response code. 254; Default Value: pong 255;ping.response = pong 256 257; The access log file 258; Default: not set 259;access.log = log/$pool.access.log 260 261; The access log format. 262; The following syntax is allowed 263; %%: the '%' character 264; %C: %CPU used by the request 265; it can accept the following format: 266; - %{user}C for user CPU only 267; - %{system}C for system CPU only 268; - %{total}C for user + system CPU (default) 269; %d: time taken to serve the request 270; it can accept the following format: 271; - %{seconds}d (default) 272; - %{miliseconds}d 273; - %{mili}d 274; - %{microseconds}d 275; - %{micro}d 276; %e: an environment variable (same as $_ENV or $_SERVER) 277; it must be associated with embraces to specify the name of the env 278; variable. Some exemples: 279; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e 280; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e 281; %f: script filename 282; %l: content-length of the request (for POST request only) 283; %m: request method 284; %M: peak of memory allocated by PHP 285; it can accept the following format: 286; - %{bytes}M (default) 287; - %{kilobytes}M 288; - %{kilo}M 289; - %{megabytes}M 290; - %{mega}M 291; %n: pool name 292; %o: output header 293; it must be associated with embraces to specify the name of the header: 294; - %{Content-Type}o 295; - %{X-Powered-By}o 296; - %{Transfert-Encoding}o 297; - .... 298; %p: PID of the child that serviced the request 299; %P: PID of the parent of the child that serviced the request 300; %q: the query string 301; %Q: the '?' character if query string exists 302; %r: the request URI (without the query string, see %q and %Q) 303; %R: remote IP address 304; %s: status (response code) 305; %t: server time the request was received 306; it can accept a strftime(3) format: 307; %d/%b/%Y:%H:%M:%S %z (default) 308; The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag 309; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t 310; %T: time the log has been written (the request has finished) 311; it can accept a strftime(3) format: 312; %d/%b/%Y:%H:%M:%S %z (default) 313; The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag 314; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t 315; %u: remote user 316; 317; Default: "%R - %u %t \"%m %r\" %s" 318;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%" 319 320; The log file for slow requests 321; Default Value: not set 322; Note: slowlog is mandatory if request_slowlog_timeout is set 323;slowlog = log/$pool.log.slow 324 325; The timeout for serving a single request after which a PHP backtrace will be 326; dumped to the 'slowlog' file. A value of '0s' means 'off'. 327; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) 328; Default Value: 0 329;request_slowlog_timeout = 0 330 331; The timeout for serving a single request after which the worker process will 332; be killed. This option should be used when the 'max_execution_time' ini option 333; does not stop script execution for some reason. A value of '0' means 'off'. 334; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) 335; Default Value: 0 336;request_terminate_timeout = 0 337 338; Set open file descriptor rlimit. 339; Default Value: system defined value 340;rlimit_files = 1024 341 342; Set max core size rlimit. 343; Possible Values: 'unlimited' or an integer greater or equal to 0 344; Default Value: system defined value 345;rlimit_core = 0 346 347; Chroot to this directory at the start. This value must be defined as an 348; absolute path. When this value is not set, chroot is not used. 349; Note: you can prefix with '$prefix' to chroot to the pool prefix or one 350; of its subdirectories. If the pool prefix is not set, the global prefix 351; will be used instead. 352; Note: chrooting is a great security feature and should be used whenever 353; possible. However, all PHP paths will be relative to the chroot 354; (error_log, sessions.save_path, ...). 355; Default Value: not set 356;chroot = 357 358; Chdir to this directory at the start. 359; Note: relative path can be used. 360; Default Value: current directory or / when chroot 361;chdir = /var/www 362 363; Redirect worker stdout and stderr into main error log. If not set, stdout and 364; stderr will be redirected to /dev/null according to FastCGI specs. 365; Note: on highloaded environement, this can cause some delay in the page 366; process time (several ms). 367; Default Value: no 368;catch_workers_output = yes 369 370; Clear environment in FPM workers 371; Prevents arbitrary environment variables from reaching FPM worker processes 372; by clearing the environment in workers before env vars specified in this 373; pool configuration are added. 374; Setting to "no" will make all environment variables available to PHP code 375; via getenv(), $_ENV and $_SERVER. 376; Default Value: yes 377;clear_env = no 378 379; Limits the extensions of the main script FPM will allow to parse. This can 380; prevent configuration mistakes on the web server side. You should only limit 381; FPM to .php extensions to prevent malicious users to use other extensions to 382; execute php code. 383; Note: set an empty value to allow all extensions. 384; Default Value: .php 385;security.limit_extensions = .php .php3 .php4 .php5 .php7 386 387; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from 388; the current environment. 389; Default Value: clean env 390;env[HOSTNAME] = $HOSTNAME 391;env[PATH] = /usr/local/bin:/usr/bin:/bin 392;env[TMP] = /tmp 393;env[TMPDIR] = /tmp 394;env[TEMP] = /tmp 395 396; Additional php.ini defines, specific to this pool of workers. These settings 397; overwrite the values previously defined in the php.ini. The directives are the 398; same as the PHP SAPI: 399; php_value/php_flag - you can set classic ini defines which can 400; be overwritten from PHP call 'ini_set'. 401; php_admin_value/php_admin_flag - these directives won't be overwritten by 402; PHP call 'ini_set' 403; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no. 404 405; Defining 'extension' will load the corresponding shared extension from 406; extension_dir. Defining 'disable_functions' or 'disable_classes' will not 407; overwrite previously defined php.ini values, but will append the new value 408; instead. 409 410; Note: path INI options can be relative and will be expanded with the prefix 411; (pool, global or @prefix@) 412 413; Default Value: nothing is defined by default except the values in php.ini and 414; specified at startup with the -d argument 415;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com 416;php_flag[display_errors] = off 417;php_admin_value[error_log] = /var/log/fpm-php.www.log 418;php_admin_flag[log_errors] = on 419;php_admin_value[memory_limit] = 32M 420
