1 2 #include <php_compat.h> 3 4 #ifndef PHP_WIN32 5 # include <php_config.h> 6 #endif 7 8 #undef PACKAGE_NAME 9 #undef PACKAGE_VERSION 10 #undef PACKAGE_TARNAME 11 #undef PACKAGE_STRING 12 13 #define SUPPORT_UCP 14 #define SUPPORT_UTF8 15 16 #if defined(__GNUC__) && __GNUC__ >= 4 17 # ifdef __cplusplus 18 # define PCRE_EXP_DECL extern "C" __attribute__ ((visibility("default"))) 19 # else 20 # define PCRE_EXP_DECL extern __attribute__ ((visibility("default"))) 21 # endif 22 # define PCRE_EXP_DEFN __attribute__ ((visibility("default"))) 23 # define PCRE_EXP_DATA_DEFN __attribute__ ((visibility("default"))) 24 #endif 25 26 27 /* Exclude these below definitions when building within PHP */ 28 #ifndef ZEND_API 29 30 /* config.h. Generated from config.h.in by configure. */ 31 /* config.h.in. Generated from configure.ac by autoheader. */ 32 33 34 /* PCRE is written in Standard C, but there are a few non-standard things it 35 can cope with, allowing it to run on SunOS4 and other "close to standard" 36 systems. 37 38 In environments that support the facilities, config.h.in is converted by 39 "configure", or config-cmake.h.in is converted by CMake, into config.h. If you 40 are going to build PCRE "by hand" without using "configure" or CMake, you 41 should copy the distributed config.h.generic to config.h, and then edit the 42 macro definitions to be the way you need them. You must then add 43 -DHAVE_CONFIG_H to all of your compile commands, so that config.h is included 44 at the start of every source. 45 46 Alternatively, you can avoid editing by using -D on the compiler command line 47 to set the macro values. In this case, you do not have to set -DHAVE_CONFIG_H. 48 49 PCRE uses memmove() if HAVE_MEMMOVE is set to 1; otherwise it uses bcopy() if 50 HAVE_BCOPY is set to 1. If your system has neither bcopy() nor memmove(), set 51 them both to 0; an emulation function will be used. */ 52 53 /* By default, the \R escape sequence matches any Unicode line ending 54 character or sequence of characters. If BSR_ANYCRLF is defined (to any 55 value), this is changed so that backslash-R matches only CR, LF, or CRLF. 56 The build-time default can be overridden by the user of PCRE at runtime. */ 57 #undef BSR_ANYCRLF 58 59 /* If you are compiling for a system that uses EBCDIC instead of ASCII 60 character codes, define this macro to any value. You must also edit the 61 NEWLINE macro below to set a suitable EBCDIC newline, commonly 21 (0x15). 62 On systems that can use "configure" or CMake to set EBCDIC, NEWLINE is 63 automatically adjusted. When EBCDIC is set, PCRE assumes that all input 64 strings are in EBCDIC. If you do not define this macro, PCRE will assume 65 input strings are ASCII or UTF-8/16/32 Unicode. It is not possible to build 66 a version of PCRE that supports both EBCDIC and UTF-8/16/32. */ 67 #undef EBCDIC 68 69 /* In an EBCDIC environment, define this macro to any value to arrange for the 70 NL character to be 0x25 instead of the default 0x15. NL plays the role that 71 LF does in an ASCII/Unicode environment. The value must also be set in the 72 NEWLINE macro below. On systems that can use "configure" or CMake to set 73 EBCDIC_NL25, the adjustment of NEWLINE is automatic. */ 74 #undef EBCDIC_NL25 75 76 /* Define to 1 if you have the `bcopy' function. */ 77 #ifndef HAVE_BCOPY 78 #define HAVE_BCOPY 1 79 #endif 80 81 /* Define to 1 if you have the <bits/type_traits.h> header file. */ 82 /* #undef HAVE_BITS_TYPE_TRAITS_H */ 83 84 /* Define to 1 if you have the <bzlib.h> header file. */ 85 #ifndef HAVE_BZLIB_H 86 #define HAVE_BZLIB_H 1 87 #endif 88 89 /* Define to 1 if you have the <dirent.h> header file. */ 90 #ifndef HAVE_DIRENT_H 91 #define HAVE_DIRENT_H 1 92 #endif 93 94 /* Define to 1 if you have the <dlfcn.h> header file. */ 95 #ifndef HAVE_DLFCN_H 96 #define HAVE_DLFCN_H 1 97 #endif 98 99 /* Define to 1 if you have the <editline/readline.h> header file. */ 100 /*#undef HAVE_EDITLINE_READLINE_H*/ 101 102 /* Define to 1 if you have the <edit/readline/readline.h> header file. */ 103 /* #undef HAVE_EDIT_READLINE_READLINE_H */ 104 105 /* Define to 1 if you have the <inttypes.h> header file. */ 106 #ifndef HAVE_INTTYPES_H 107 #define HAVE_INTTYPES_H 1 108 #endif 109 110 /* Define to 1 if you have the <limits.h> header file. */ 111 #ifndef HAVE_LIMITS_H 112 #define HAVE_LIMITS_H 1 113 #endif 114 115 /* Define to 1 if the system has the type `long long'. */ 116 #ifndef HAVE_LONG_LONG 117 #define HAVE_LONG_LONG 1 118 #endif 119 120 /* Define to 1 if you have the `memmove' function. */ 121 #ifndef HAVE_MEMMOVE 122 #define HAVE_MEMMOVE 1 123 #endif 124 125 /* Define to 1 if you have the <memory.h> header file. */ 126 #ifndef HAVE_MEMORY_H 127 #define HAVE_MEMORY_H 1 128 #endif 129 130 /* Define if you have POSIX threads libraries and header files. */ 131 #undef HAVE_PTHREAD 132 133 /* Have PTHREAD_PRIO_INHERIT. */ 134 #undef HAVE_PTHREAD_PRIO_INHERIT 135 /* Define to 1 if you have the <readline/history.h> header file. */ 136 #ifndef HAVE_READLINE_HISTORY_H 137 #define HAVE_READLINE_HISTORY_H 1 138 #endif 139 140 /* Define to 1 if you have the <readline/readline.h> header file. */ 141 #ifndef HAVE_READLINE_READLINE_H 142 #define HAVE_READLINE_READLINE_H 1 143 #endif 144 145 /* Define to 1 if you have the <stdint.h> header file. */ 146 #ifndef HAVE_STDINT_H 147 #define HAVE_STDINT_H 1 148 #endif 149 150 /* Define to 1 if you have the <stdlib.h> header file. */ 151 #ifndef HAVE_STDLIB_H 152 #define HAVE_STDLIB_H 1 153 #endif 154 155 /* Define to 1 if you have the `strerror' function. */ 156 #ifndef HAVE_STRERROR 157 #define HAVE_STRERROR 1 158 #endif 159 160 /* Define to 1 if you have the <string> header file. */ 161 #ifndef HAVE_STRING 162 #define HAVE_STRING 1 163 #endif 164 165 /* Define to 1 if you have the <strings.h> header file. */ 166 #ifndef HAVE_STRINGS_H 167 #define HAVE_STRINGS_H 1 168 #endif 169 170 /* Define to 1 if you have the <string.h> header file. */ 171 #ifndef HAVE_STRING_H 172 #define HAVE_STRING_H 1 173 #endif 174 175 /* Define to 1 if you have `strtoimax'. */ 176 /* #undef HAVE_STRTOIMAX */ 177 178 /* Define to 1 if you have `strtoll'. */ 179 /* #undef HAVE_STRTOLL */ 180 181 /* Define to 1 if you have `strtoq'. */ 182 #ifndef HAVE_STRTOQ 183 #define HAVE_STRTOQ 1 184 #endif 185 186 /* Define to 1 if you have the <sys/stat.h> header file. */ 187 #ifndef HAVE_SYS_STAT_H 188 #define HAVE_SYS_STAT_H 1 189 #endif 190 191 /* Define to 1 if you have the <sys/types.h> header file. */ 192 #ifndef HAVE_SYS_TYPES_H 193 #define HAVE_SYS_TYPES_H 1 194 #endif 195 196 /* Define to 1 if you have the <type_traits.h> header file. */ 197 /* #undef HAVE_TYPE_TRAITS_H */ 198 199 /* Define to 1 if you have the <unistd.h> header file. */ 200 #ifndef HAVE_UNISTD_H 201 #define HAVE_UNISTD_H 1 202 #endif 203 204 /* Define to 1 if the system has the type `unsigned long long'. */ 205 #ifndef HAVE_UNSIGNED_LONG_LONG 206 #define HAVE_UNSIGNED_LONG_LONG 1 207 #endif 208 209 /* Define to 1 or 0, depending whether the compiler supports simple visibility 210 declarations. */ 211 /* #undef HAVE_VISIBILITY */ 212 213 /* Define to 1 if you have the <windows.h> header file. */ 214 /* #undef HAVE_WINDOWS_H */ 215 216 /* Define to 1 if you have the <zlib.h> header file. */ 217 #ifndef HAVE_ZLIB_H 218 #define HAVE_ZLIB_H 1 219 #endif 220 221 /* Define to 1 if you have `_strtoi64'. */ 222 /* #undef HAVE__STRTOI64 */ 223 224 /* Exclude these above definitions when building within PHP */ 225 #endif 226 227 /* The value of LINK_SIZE determines the number of bytes used to store links 228 as offsets within the compiled regex. The default is 2, which allows for 229 compiled patterns up to 64K long. This covers the vast majority of cases. 230 However, PCRE can also be compiled to use 3 or 4 bytes instead. This allows 231 for longer patterns in extreme cases. On systems that support it, 232 "configure" can be used to override this default. */ 233 #ifndef LINK_SIZE 234 #define LINK_SIZE 2 235 #endif 236 237 /* Define to the sub-directory in which libtool stores uninstalled libraries. 238 */ 239 #ifndef LT_OBJDIR 240 #define LT_OBJDIR ".libs/" 241 #endif 242 243 /* The value of MATCH_LIMIT determines the default number of times the 244 internal match() function can be called during a single execution of 245 pcre_exec(). There is a runtime interface for setting a different limit. 246 The limit exists in order to catch runaway regular expressions that take 247 for ever to determine that they do not match. The default is set very large 248 so that it does not accidentally catch legitimate cases. On systems that 249 support it, "configure" can be used to override this default default. */ 250 #ifndef MATCH_LIMIT 251 #define MATCH_LIMIT 10000000 252 #endif 253 254 /* The above limit applies to all calls of match(), whether or not they 255 increase the recursion depth. In some environments it is desirable to limit 256 the depth of recursive calls of match() more strictly, in order to restrict 257 the maximum amount of stack (or heap, if NO_RECURSE is defined) that is 258 used. The value of MATCH_LIMIT_RECURSION applies only to recursive calls of 259 match(). To have any useful effect, it must be less than the value of 260 MATCH_LIMIT. The default is to use the same value as MATCH_LIMIT. There is 261 a runtime method for setting a different limit. On systems that support it, 262 "configure" can be used to override the default. */ 263 #ifndef MATCH_LIMIT_RECURSION 264 #define MATCH_LIMIT_RECURSION MATCH_LIMIT 265 #endif 266 267 /* This limit is parameterized just in case anybody ever wants to change it. 268 Care must be taken if it is increased, because it guards against integer 269 overflow caused by enormously large patterns. */ 270 #ifndef MAX_NAME_COUNT 271 #define MAX_NAME_COUNT 10000 272 #endif 273 274 /* This limit is parameterized just in case anybody ever wants to change it. 275 Care must be taken if it is increased, because it guards against integer 276 overflow caused by enormously large patterns. */ 277 #ifndef MAX_NAME_SIZE 278 #define MAX_NAME_SIZE 32 279 #endif 280 281 /* The value of NEWLINE determines the default newline character sequence. 282 PCRE client programs can override this by selecting other values at run 283 time. In ASCII environments, the value can be 10 (LF), 13 (CR), or 3338 284 (CRLF); in EBCDIC environments the value can be 21 or 37 (LF), 13 (CR), or 285 3349 or 3365 (CRLF) because there are two alternative codepoints (0x15 and 286 0x25) that are used as the NL line terminator that is equivalent to ASCII 287 LF. In both ASCII and EBCDIC environments the value can also be -1 (ANY), 288 or -2 (ANYCRLF). */ 289 #ifndef NEWLINE 290 #define NEWLINE 10 291 #endif 292 293 /* Define to 1 if your C compiler doesn't accept -c and -o together. */ 294 /* #undef NO_MINUS_C_MINUS_O */ 295 296 /* PCRE uses recursive function calls to handle backtracking while matching. 297 This can sometimes be a problem on systems that have stacks of limited 298 size. Define NO_RECURSE to any value to get a version that doesn't use 299 recursion in the match() function; instead it creates its own stack by 300 steam using pcre_recurse_malloc() to obtain memory from the heap. For more 301 detail, see the comments and other stuff just above the match() function. 302 */ 303 /* #undef NO_RECURSE */ 304 305 /* Name of package */ 306 #define PACKAGE "pcre" 307 308 /* Define to the address where bug reports for this package should be sent. */ 309 #define PACKAGE_BUGREPORT "" 310 311 /* Define to the full name of this package. */ 312 #define PACKAGE_NAME "PCRE" 313 314 /* Define to the full name and version of this package. */ 315 #define PACKAGE_STRING "PCRE 8.32" 316 317 /* Define to the one symbol short name of this package. */ 318 #define PACKAGE_TARNAME "pcre" 319 320 /* Define to the home page for this package. */ 321 #define PACKAGE_URL "" 322 323 /* Define to the version of this package. */ 324 #define PACKAGE_VERSION "8.32" 325 326 /* to make a symbol visible */ 327 /* #undef PCRECPP_EXP_DECL */ 328 329 /* to make a symbol visible */ 330 /* #undef PCRECPP_EXP_DEFN */ 331 332 /* The value of PCREGREP_BUFSIZE determines the size of buffer used by 333 pcregrep to hold parts of the file it is searching. This is also the 334 minimum value. The actual amount of memory used by pcregrep is three times 335 this number, because it allows for the buffering of "before" and "after" 336 lines. */ 337 /* #undef PCREGREP_BUFSIZE */ 338 339 /* to make a symbol visible */ 340 /* #undef PCREPOSIX_EXP_DECL */ 341 342 /* to make a symbol visible */ 343 /* #undef PCREPOSIX_EXP_DEFN */ 344 345 /* to make a symbol visible */ 346 /* #undef PCRE_EXP_DATA_DEFN */ 347 348 /* to make a symbol visible */ 349 /* #undef PCRE_EXP_DECL */ 350 351 352 /* If you are compiling for a system other than a Unix-like system or 353 Win32, and it needs some magic to be inserted before the definition 354 of a function that is exported by the library, define this macro to 355 contain the relevant magic. If you do not define this macro, a suitable 356 __declspec value is used for Windows systems; in other environments 357 "extern" is used for a C compiler and "extern C" for a C++ compiler. 358 This macro apears at the start of every exported function that is part 359 of the external API. It does not appear on functions that are "external" 360 in the C sense, but which are internal to the library. */ 361 /* #undef PCRE_EXP_DEFN */ 362 363 /* Define to any value if linking statically (TODO: make nice with Libtool) */ 364 /* #undef PCRE_STATIC */ 365 366 /* When calling PCRE via the POSIX interface, additional working storage is 367 required for holding the pointers to capturing substrings because PCRE 368 requires three integers per substring, whereas the POSIX interface provides 369 only two. If the number of expected substrings is small, the wrapper 370 function uses space on the stack, because this is faster than using 371 malloc() for each call. The threshold above which the stack is no longer 372 used is defined by POSIX_MALLOC_THRESHOLD. */ 373 #ifndef POSIX_MALLOC_THRESHOLD 374 #define POSIX_MALLOC_THRESHOLD 10 375 #endif 376 377 /* Define to necessary symbol if this constant uses a non-standard name on 378 your system. */ 379 /* #undef PTHREAD_CREATE_JOINABLE */ 380 381 /* Define to 1 if you have the ANSI C header files. */ 382 #ifndef STDC_HEADERS 383 #define STDC_HEADERS 1 384 #endif 385 386 /* Define to allow pcretest and pcregrep to be linked with gcov, so that they 387 are able to generate code coverage reports. */ 388 #undef SUPPORT_GCOV 389 390 /* Define to any value to enable support for Just-In-Time compiling. */ 391 #undef SUPPORT_JIT 392 393 /* Define to any value to allow pcregrep to be linked with libbz2, so that it 394 is able to handle .bz2 files. */ 395 /* #undef SUPPORT_LIBBZ2 */ 396 397 /* Define to any value to allow pcretest to be linked with libedit. */ 398 #undef SUPPORT_LIBEDIT 399 400 /* Define to any value to allow pcretest to be linked with libreadline. */ 401 /* #undef SUPPORT_LIBREADLINE */ 402 403 /* Define to any value to allow pcregrep to be linked with libz, so that it is 404 able to handle .gz files. */ 405 /* #undef SUPPORT_LIBZ */ 406 407 /* Define to any value to enable the 16 bit PCRE library. */ 408 /* #undef SUPPORT_PCRE16 */ 409 410 /* Define to any value to enable the 32 bit PCRE library. */ 411 /* #undef SUPPORT_PCRE32 */ 412 413 /* Define to any value to enable the 8 bit PCRE library. */ 414 /* #undef SUPPORT_PCRE8 */ 415 416 /* Define to any value to enable JIT support in pcregrep. */ 417 /* #undef SUPPORT_PCREGREP_JIT */ 418 419 /* Define to enable support for Unicode properties */ 420 /* #undef SUPPORT_UCP */ 421 422 /* Define to any value to enable support for the UTF-8/16/32 Unicode encoding. 423 This will work even in an EBCDIC environment, but it is incompatible with 424 the EBCDIC macro. That is, PCRE can support *either* EBCDIC code *or* 425 ASCII/UTF-8/16/32, but not both at once. */ 426 /* #undef SUPPORT_UTF8 */ 427 428 /* Valgrind support to find invalid memory reads. */ 429 /* #undef SUPPORT_VALGRIND */ 430 431 /* Version number of package */ 432 #ifndef VERSION 433 #define VERSION "8.32" 434 #endif 435 436 /* Define to empty if `const' does not conform to ANSI C. */ 437 /* #undef const */ 438 439 /* Define to the type of a signed integer type of width exactly 64 bits if 440 such a type exists and the standard includes do not define it. */ 441 /* #undef int64_t */ 442 443 /* Define to `unsigned int' if <sys/types.h> does not define. */ 444 /* #undef size_t */ 445
