curl/docs/TheArtOfHttpScripting.md

<!--
Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al.

SPDX-License-Identifier: curl
-->

# The Art Of Scripting HTTP Requests Using Curl

## Background

 This document assumes that you are familiar with HTML and general networking.

 The increasing amount of applications moving to the web has made "HTTP
 Scripting" more frequently requested and wanted. To be able to automatically
 extract information from the web, to fake users, to post or upload data to
 web servers are all important tasks today.

 Curl is a command line tool for doing all sorts of URL manipulations and
 transfers, but this particular document focuses on how to use it when doing
 HTTP requests for fun and profit. This documents assumes that you know how to
 invoke `curl --help` or `curl --manual` to get basic information about it.

 Curl is not written to do everything for you. It makes the requests, it gets
 the data, it sends data and it retrieves the information. You probably need
 to glue everything together using some kind of script language or repeated
 manual invokes.

## The HTTP Protocol

 HTTP is the protocol used to fetch data from web servers. It is a simple
 protocol that is built upon TCP/IP. The protocol also allows information to
 get sent to the server from the client using a few different methods, as is
 shown here.

 HTTP is plain ASCII text lines being sent by the client to a server to
 request a particular action, and then the server replies a few text lines
 before the actual requested content is sent to the client.

 The client, curl, sends an HTTP request. The request contains a method (like
 GET, POST, HEAD etc), a number of request headers and sometimes a request
 body. The HTTP server responds with a status line (indicating if things went
 well), response headers and most often also a response body. The "body" part
 is the plain data you requested, like the actual HTML or the image etc.

## See the Protocol

 Using curl's option [`--verbose`](https://curl.se/docs/manpage.html#-v) (`-v`
 as a short option) displays what kind of commands curl sends to the server,
 as well as a few other informational texts.

 `--verbose` is the single most useful option when it comes to debug or even
 understand the curl<->server interaction.

 Sometimes even `--verbose` is not enough. Then
 [`--trace`](https://curl.se/docs/manpage.html#-trace) and
 [`--trace-ascii`](https://curl.se/docs/manpage.html#--trace-ascii)
 offer even more details as they show **everything** curl sends and
 receives. Use it like this:

    curl --trace-ascii debugdump.txt http://www.example.com/

## See the Timing

 Many times you may wonder what exactly is taking all the time, or you just
 want to know the amount of milliseconds between two points in a transfer. For
 those, and other similar situations, the
 [`--trace-time`](https://curl.se/docs/manpage.html#--trace-time) option is
 what you need. It prepends the time to each trace output line:

    curl --trace-ascii d.txt --trace-time http://example.com/

## See which Transfer

 When doing parallel transfers, it is relevant to see which transfer is doing
 what. When response headers are received (and logged) you need to know which
 transfer these are for.
 [`--trace-ids`](https://curl.se/docs/manpage.html#--trace-ids) option is what
 you need. It prepends the transfer and connection identifier to each trace
 output line:

    curl --trace-ascii d.txt --trace-ids http://example.com/

## See the Response

 By default curl sends the response to stdout. You need to redirect it
 somewhere to avoid that, most often that is done with `-o` or `-O`.

# URL

## Spec

 The Uniform Resource Locator format is how you specify the address of a
 particular resource on the Internet. You know these, you have seen URLs like
 https://curl.se or https://example.com a million times. RFC 3986 is the
 canonical spec. The formal name is not URL, it is **URI**.

## Host

 The hostname is usually resolved using DNS or your /etc/hosts file to an IP
 address and that is what curl communicates with. Alternatively you specify
 the IP address directly in the URL instead of a name.

 For development and other trying out situations, you can point to a different
 IP address for a hostname than what would otherwise be used, by using curl's
 [`--resolve`](https://curl.se/docs/manpage.html#--resolve) option:

    curl --resolve www.example.org:80:127.0.0.1 http://www.example.org/

## Port number

 Each protocol curl supports operates on a default port number, be it over TCP
 or in some cases UDP. Normally you do not have to take that into
 consideration, but at times you run test servers on other ports or
 similar. Then you can specify the port number in the URL with a colon and a
 number immediately following the hostname. Like when doing HTTP to port
 1234:

    curl http://www.example.org:1234/

 The port number you specify in the URL is the number that the server uses to
 offer its services. Sometimes you may use a proxy, and then you may
 need to specify that proxy's port number separately from what curl needs to
 connect to the server. Like when using an HTTP proxy on port 4321:

    curl --proxy http://proxy.example.org:4321 http://remote.example.org/

## Username and password

 Some services are setup to require HTTP authentication and then you need to
 provide name and password which is then transferred to the remote site in
 various ways depending on the exact authentication protocol used.

 You can opt to either insert the user and password in the URL or you can
 provide them separately:

    curl http://user:password@example.org/

 or

    curl -u user:password http://example.org/

 You need to pay attention that this kind of HTTP authentication is not what
 is usually done and requested by user-oriented websites these days. They tend
 to use forms and cookies instead.

## Path part

 The path part is just sent off to the server to request that it sends back
 the associated response. The path is what is to the right side of the slash
 that follows the hostname and possibly port number.

# Fetch a page

## GET

 The simplest and most common request/operation made using HTTP is to GET a
 URL. The URL could itself refer to a webpage, an image or a file. The client
 issues a GET request to the server and receives the document it asked for.
 If you issue the command line

    curl https://curl.se

 you get a webpage returned in your terminal window. The entire HTML document
 that that URL holds.

 All HTTP replies contain a set of response headers that are normally hidden,
 use curl's [`--include`](https://curl.se/docs/manpage.html#-i) (`-i`)
 option to display them as well as the rest of the document.

## HEAD

 You can ask the remote server for ONLY the headers by using the
 [`--head`](https://curl.se/docs/manpage.html#-I) (`-I`) option which makes
 curl issue a HEAD request. In some special cases servers deny the HEAD method
 while others still work, which is a particular kind of annoyance.

 The HEAD method is defined and made so that the server returns the headers
 exactly the way it would do for a GET, but without a body. It means that you
 may see a `Content-Length:` in the response headers, but there must not be an
 actual body in the HEAD response.

## Multiple URLs in a single command line

 A single curl command line may involve one or many URLs. The most common case
 is probably to just use one, but you can specify any amount of URLs. Yes any.
 No limits. You then get requests repeated over and over for all the given
 URLs.

 Example, send two GET requests:

    curl http://url1.example.com http://url2.example.com

 If you use [`--data`](https://curl.se/docs/manpage.html#-d) to POST to
 the URL, using multiple URLs means that you send that same POST to all the
 given URLs.

 Example, send two POSTs:

    curl --data name=curl http://url1.example.com http://url2.example.com


## Multiple HTTP methods in a single command line

 Sometimes you need to operate on several URLs in a single command line and do
 different HTTP methods on each. For this, you might enjoy the
 [`--next`](https://curl.se/docs/manpage.html#-:) option. It is basically a
 separator that separates a bunch of options from the next. All the URLs
 before `--next` get the same method and get all the POST data merged into
 one.

 When curl reaches the `--next` on the command line, it resets the method and
 the POST data and allow a new set.

 Perhaps this is best shown with a few examples. To send first a HEAD and then
 a GET:

    curl -I http://example.com --next http://example.com

 To first send a POST and then a GET:

    curl -d score=10 http://example.com/post.cgi --next http://example.com/results.html

# HTML forms

## Forms explained

 Forms are the general way a website can present an HTML page with fields for
 the user to enter data in, and then press some kind of 'OK' or 'Submit'
 button to get that data sent to the server. The server then typically uses
 the posted data to decide how to act. Like using the entered words to search
 in a database, or to add the info in a bug tracking system, display the
 entered address on a map or using the info as a login-prompt verifying that
 the user is allowed to see what it is about to see.

 Of course there has to be some kind of program on the server end to receive
 the data you send. You cannot just invent something out of the air.

## GET

 A GET-form uses the method GET, as specified in HTML like:

```html
<form method="GET" action="junk.cgi">
  <input type=text name="birthyear">
  <input type=submit name=press value="OK">
</form>
```

 In your favorite browser, this form appears with a text box to fill in and a
 press-button labeled "OK". If you fill in '1905' and press the OK button,
 your browser then creates a new URL to get for you. The URL gets
 `junk.cgi?birthyear=1905&press=OK` appended to the path part of the previous
 URL.

 If the original form was seen on the page `www.example.com/when/birth.html`,
 the second page you get becomes
 `www.example.com/when/junk.cgi?birthyear=1905&press=OK`.

 Most search engines work this way.

 To make curl do the GET form post for you, just enter the expected created
 URL:

    curl "http://www.example.com/when/junk.cgi?birthyear=1905&press=OK"

## POST

 The GET method makes all input field names get displayed in the URL field of
 your browser. That is generally a good thing when you want to be able to
 bookmark that page with your given data, but it is an obvious disadvantage if
 you entered secret information in one of the fields or if there are a large
 amount of fields creating a long and unreadable URL.

 The HTTP protocol then offers the POST method. This way the client sends the
 data separated from the URL and thus you do not see any of it in the URL
 address field.

 The form would look similar to the previous one:

```html
<form method="POST" action="junk.cgi">
  <input type=text name="birthyear">
  <input type=submit name=press value=" OK ">
</form>
```

 And to use curl to post this form with the same data filled in as before, we
 could do it like:

    curl --data "birthyear=1905&press=%20OK%20" http://www.example.com/when/junk.cgi

 This kind of POST uses the Content-Type `application/x-www-form-urlencoded`
 and is the most widely used POST kind.

 The data you send to the server MUST already be properly encoded, curl does
 not do that for you. For example, if you want the data to contain a space,
 you need to replace that space with `%20`, etc. Failing to comply with this
 most likely causes your data to be received wrongly and messed up.

 Recent curl versions can in fact url-encode POST data for you, like this:

    curl --data-urlencode "name=I am Daniel" http://www.example.com

 If you repeat `--data` several times on the command line, curl concatenates
 all the given data pieces - and put a `&` symbol between each data segment.

## File Upload POST

 Back in late 1995 they defined an additional way to post data over HTTP. It
 is documented in the RFC 1867, why this method sometimes is referred to as
 RFC 1867-posting.

 This method is mainly designed to better support file uploads. A form that
 allows a user to upload a file could be written like this in HTML:

    <form method="POST" enctype='multipart/form-data' action="upload.cgi">
      <input name=upload type=file>
      <input type=submit name=press value="OK">
    </form>

 This clearly shows that the Content-Type about to be sent is
 `multipart/form-data`.

 To post to a form like this with curl, you enter a command line like:

    curl --form upload=@localfilename --form press=OK [URL]

## Hidden Fields

 A common way for HTML based applications to pass state information between
 pages is to add hidden fields to the forms. Hidden fields are already filled
 in, they are not displayed to the user and they get passed along just as all
 the other fields.

 A similar example form with one visible field, one hidden field and one
 submit button could look like:

```html
<form method="POST" action="foobar.cgi">
  <input type=text name="birthyear">
  <input type=hidden name="person" value="daniel">
  <input type=submit name="press" value="OK">
</form>
```

 To POST this with curl, you do not have to think about if the fields are
 hidden or not. To curl they are all the same:

    curl --data "birthyear=1905&press=OK&person=daniel" [URL]

## Figure Out What A POST Looks Like

 When you are about to fill in a form and send it to a server by using curl
 instead of a browser, you are of course interested in sending a POST exactly
 the way your browser does.

 An easy way to get to see this, is to save the HTML page with the form on
 your local disk, modify the 'method' to a GET, and press the submit button
 (you could also change the action URL if you want to).

 You then clearly see the data get appended to the URL, separated with a
 `?`-letter as GET forms are supposed to.

# HTTP upload

## PUT

 Perhaps the best way to upload data to an HTTP server is to use PUT. Then
 again, this of course requires that someone put a program or script on the
 server end that knows how to receive an HTTP PUT stream.

 Put a file to an HTTP server with curl:

    curl --upload-file uploadfile http://www.example.com/receive.cgi

# HTTP Authentication

## Basic Authentication

 HTTP Authentication is the ability to tell the server your username and
 password so that it can verify that you are allowed to do the request you are
 doing. The Basic authentication used in HTTP (which is the type curl uses by
 default) is **plain text** based, which means it sends username and password
 only slightly obfuscated, but still fully readable by anyone that sniffs on
 the network between you and the remote server.

 To tell curl to use a user and password for authentication:

    curl --user name:password http://www.example.com

## Other Authentication

 The site might require a different authentication method (check the headers
 returned by the server), and then
 [`--ntlm`](https://curl.se/docs/manpage.html#--ntlm),
 [`--digest`](https://curl.se/docs/manpage.html#--digest),
 [`--negotiate`](https://curl.se/docs/manpage.html#--negotiate) or even
 [`--anyauth`](https://curl.se/docs/manpage.html#--anyauth) might be
 options that suit you.

## Proxy Authentication

 Sometimes your HTTP access is only available through the use of an HTTP
 proxy. This seems to be especially common at various companies. An HTTP proxy
 may require its own user and password to allow the client to get through to
 the Internet. To specify those with curl, run something like:

    curl --proxy-user proxyuser:proxypassword curl.se

 If your proxy requires the authentication to be done using the NTLM method,
 use [`--proxy-ntlm`](https://curl.se/docs/manpage.html#--proxy-ntlm), if
 it requires Digest use
 [`--proxy-digest`](https://curl.se/docs/manpage.html#--proxy-digest).

 If you use any one of these user+password options but leave out the password
 part, curl prompts for the password interactively.

## Hiding credentials

 Do note that when a program is run, its parameters might be possible to see
 when listing the running processes of the system. Thus, other users may be
 able to watch your passwords if you pass them as plain command line
 options. There are ways to circumvent this.

 It is worth noting that while this is how HTTP Authentication works, many
 websites do not use this concept when they provide logins etc. See the Web
 Login chapter further below for more details on that.

# More HTTP Headers

## Referer

 An HTTP request may include a 'referer' field (yes it is misspelled), which
 can be used to tell from which URL the client got to this particular
 resource. Some programs/scripts check the referer field of requests to verify
 that this was not arriving from an external site or an unknown page. While
 this is a stupid way to check something so easily forged, many scripts still
 do it. Using curl, you can put anything you want in the referer-field and
 thus more easily be able to fool the server into serving your request.

 Use curl to set the referer field with:

    curl --referer http://www.example.come http://www.example.com

## User Agent

 Similar to the referer field, all HTTP requests may set the User-Agent
 field. It names what user agent (client) that is being used. Many
 applications use this information to decide how to display pages. Silly web
 programmers try to make different pages for users of different browsers to
 make them look the best possible for their particular browsers. They usually
 also do different kinds of JavaScript etc.

 At times, you may learn that getting a page with curl does not return the
 same page that you see when getting the page with your browser. Then you know
 it is time to set the User Agent field to fool the server into thinking you
 are one of those browsers.

 To make curl look like Internet Explorer 5 on a Windows 2000 box:

    curl --user-agent "Mozilla/4.0 (compatible; MSIE 5.01; Windows NT 5.0)" [URL]

 Or why not look like you are using Netscape 4.73 on an old Linux box:

    curl --user-agent "Mozilla/4.73 [en] (X11; U; Linux 2.2.15 i686)" [URL]

## Redirects

## Location header

 When a resource is requested from a server, the reply from the server may
 include a hint about where the browser should go next to find this page, or a
 new page keeping newly generated output. The header that tells the browser to
 redirect is `Location:`.

 Curl does not follow `Location:` headers by default, but simply displays such
 pages in the same manner it displays all HTTP replies. It does however
 feature an option that makes it attempt to follow the `Location:` pointers.

 To tell curl to follow a Location:

    curl --location http://www.example.com

 If you use curl to POST to a site that immediately redirects you to another
 page, you can safely use [`--location`](https://curl.se/docs/manpage.html#-L)
 (`-L`) and `--data`/`--form` together. Curl only uses POST in the first
 request, and then revert to GET in the following operations.

## Other redirects

 Browsers typically support at least two other ways of redirects that curl
 does not: first the html may contain a meta refresh tag that asks the browser
 to load a specific URL after a set number of seconds, or it may use
 JavaScript to do it.

# Cookies

## Cookie Basics

 The way the web browsers do "client side state control" is by using
 cookies. Cookies are just names with associated contents. The cookies are
 sent to the client by the server. The server tells the client for what path
 and hostname it wants the cookie sent back, and it also sends an expiration
 date and a few more properties.

 When a client communicates with a server with a name and path as previously
 specified in a received cookie, the client sends back the cookies and their
 contents to the server, unless of course they are expired.

 Many applications and servers use this method to connect a series of requests
 into a single logical session. To be able to use curl in such occasions, we
 must be able to record and send back cookies the way the web application
 expects them. The same way browsers deal with them.

## Cookie options

 The simplest way to send a few cookies to the server when getting a page with
 curl is to add them on the command line like:

    curl --cookie "name=Daniel" http://www.example.com

 Cookies are sent as common HTTP headers. This is practical as it allows curl
 to record cookies simply by recording headers. Record cookies with curl by
 using the [`--dump-header`](https://curl.se/docs/manpage.html#-D) (`-D`)
 option like:

    curl --dump-header headers_and_cookies http://www.example.com

 (Take note that the
 [`--cookie-jar`](https://curl.se/docs/manpage.html#-c) option described
 below is a better way to store cookies.)

 Curl has a full blown cookie parsing engine built-in that comes in use if you
 want to reconnect to a server and use cookies that were stored from a
 previous connection (or hand-crafted manually to fool the server into
 believing you had a previous connection). To use previously stored cookies,
 you run curl like:

    curl --cookie stored_cookies_in_file http://www.example.com

 Curl's "cookie engine" gets enabled when you use the
 [`--cookie`](https://curl.se/docs/manpage.html#-b) option. If you only
 want curl to understand received cookies, use `--cookie` with a file that
 does not exist. Example, if you want to let curl understand cookies from a
 page and follow a location (and thus possibly send back cookies it received),
 you can invoke it like:

    curl --cookie nada --location http://www.example.com

 Curl has the ability to read and write cookie files that use the same file
 format that Netscape and Mozilla once used. It is a convenient way to share
 cookies between scripts or invokes. The `--cookie` (`-b`) switch
 automatically detects if a given file is such a cookie file and parses it,
 and by using the `--cookie-jar` (`-c`) option you make curl write a new
 cookie file at the end of an operation:

    curl --cookie cookies.txt --cookie-jar newcookies.txt \
      http://www.example.com

# HTTPS

## HTTPS is HTTP secure

 There are a few ways to do secure HTTP transfers. By far the most common
 protocol for doing this is what is generally known as HTTPS, HTTP over
 SSL. SSL encrypts all the data that is sent and received over the network and
 thus makes it harder for attackers to spy on sensitive information.

 SSL (or TLS as the current version of the standard is called) offers a set of
 advanced features to do secure transfers over HTTP.

 Curl supports encrypted fetches when built to use a TLS library and it can be
 built to use one out of a fairly large set of libraries - `curl -V` shows
 which one your curl was built to use (if any). To get a page from an HTTPS
 server, simply run curl like:

    curl https://secure.example.com

## Certificates

 In the HTTPS world, you use certificates to validate that you are the one you
 claim to be, as an addition to normal passwords. Curl supports client- side
 certificates. All certificates are locked with a passphrase, which you need
 to enter before the certificate can be used by curl. The passphrase can be
 specified on the command line or if not, entered interactively when curl
 queries for it. Use a certificate with curl on an HTTPS server like:

    curl --cert mycert.pem https://secure.example.com

 curl also tries to verify that the server is who it claims to be, by
 verifying the server's certificate against a locally stored CA cert bundle.
 Failing the verification causes curl to deny the connection. You must then
 use [`--insecure`](https://curl.se/docs/manpage.html#-k) (`-k`) in case you
 want to tell curl to ignore that the server cannot be verified.

 More about server certificate verification and ca cert bundles can be read in
 the [`SSLCERTS` document](https://curl.se/docs/sslcerts.html).

 At times you may end up with your own CA cert store and then you can tell
 curl to use that to verify the server's certificate:

    curl --cacert ca-bundle.pem https://example.com/

# Custom Request Elements

## Modify method and headers

 Doing fancy stuff, you may need to add or change elements of a single curl
 request.

 For example, you can change the POST method to `PROPFIND` and send the data
 as `Content-Type: text/xml` (instead of the default `Content-Type`) like
 this:

    curl --data "<xml>" --header "Content-Type: text/xml" \
      --request PROPFIND example.com

 You can delete a default header by providing one without content. Like you
 can ruin the request by chopping off the `Host:` header:

    curl --header "Host:" http://www.example.com

 You can add headers the same way. Your server may want a `Destination:`
 header, and you can add it:

    curl --header "Destination: http://nowhere" http://example.com

## More on changed methods

 It should be noted that curl selects which methods to use on its own
 depending on what action to ask for. `-d` makes a POST, `-I` makes a HEAD and
 so on. If you use the [`--request`](https://curl.se/docs/manpage.html#-X) /
 `-X` option you can change the method keyword curl selects, but you do not
 modify curl's behavior. This means that if you for example use -d "data" to
 do a POST, you can modify the method to a `PROPFIND` with `-X` and curl still
 thinks it sends a POST. You can change the normal GET to a POST method by
 simply adding `-X POST` in a command line like:

    curl -X POST http://example.org/

 curl however still acts as if it sent a GET so it does not send any request
 body etc.

# Web Login

## Some login tricks

 While not strictly just HTTP related, it still causes a lot of people
 problems so here's the executive run-down of how the vast majority of all
 login forms work and how to login to them using curl.

 It can also be noted that to do this properly in an automated fashion, you
 most certainly need to script things and do multiple curl invokes etc.

 First, servers mostly use cookies to track the logged-in status of the
 client, so you need to capture the cookies you receive in the responses.
 Then, many sites also set a special cookie on the login page (to make sure
 you got there through their login page) so you should make a habit of first
 getting the login-form page to capture the cookies set there.

 Some web-based login systems feature various amounts of JavaScript, and
 sometimes they use such code to set or modify cookie contents. Possibly they
 do that to prevent programmed logins, like this manual describes how to...
 Anyway, if reading the code is not enough to let you repeat the behavior
 manually, capturing the HTTP requests done by your browsers and analyzing the
 sent cookies is usually a working method to work out how to shortcut the
 JavaScript need.

 In the actual `<form>` tag for the login, lots of sites fill-in
 random/session or otherwise secretly generated hidden tags and you may need
 to first capture the HTML code for the login form and extract all the hidden
 fields to be able to do a proper login POST. Remember that the contents need
 to be URL encoded when sent in a normal POST.

# Debug

## Some debug tricks

 Many times when you run curl on a site, you notice that the site does not
 seem to respond the same way to your curl requests as it does to your
 browser's.

 Then you need to start making your curl requests more similar to your
 browser's requests:

 - Use the `--trace-ascii` option to store fully detailed logs of the requests
   for easier analyzing and better understanding

 - Make sure you check for and use cookies when needed (both reading with
   `--cookie` and writing with `--cookie-jar`)

 - Set user-agent (with [`-A`](https://curl.se/docs/manpage.html#-A)) to
   one like a recent popular browser does

 - Set referer (with [`-E`](https://curl.se/docs/manpage.html#-E)) like
   it is set by the browser

 - If you use POST, make sure you send all the fields and in the same order as
   the browser does it.

## Check what the browsers do

 A good helper to make sure you do this right, is the web browsers' developers
 tools that let you view all headers you send and receive (even when using
 HTTPS).

 A more raw approach is to capture the HTTP traffic on the network with tools
 such as Wireshark or tcpdump and check what headers that were sent and
 received by the browser. (HTTPS forces you to use `SSLKEYLOGFILE` to do
 that.)