1 /************************************************* 2 * Perl-Compatible Regular Expressions * 3 *************************************************/ 4 5 /* PCRE is a library of functions to support regular expressions whose syntax 6 and semantics are as close as possible to those of the Perl 5 language. 7 8 Written by Philip Hazel 9 Original API code Copyright (c) 1997-2012 University of Cambridge 10 New API code Copyright (c) 2016-2022 University of Cambridge 11 12 ----------------------------------------------------------------------------- 13 Redistribution and use in source and binary forms, with or without 14 modification, are permitted provided that the following conditions are met: 15 16 * Redistributions of source code must retain the above copyright notice, 17 this list of conditions and the following disclaimer. 18 19 * Redistributions in binary form must reproduce the above copyright 20 notice, this list of conditions and the following disclaimer in the 21 documentation and/or other materials provided with the distribution. 22 23 * Neither the name of the University of Cambridge nor the names of its 24 contributors may be used to endorse or promote products derived from 25 this software without specific prior written permission. 26 27 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 28 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 29 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 30 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 31 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 32 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 33 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 34 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 35 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 36 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 37 POSSIBILITY OF SUCH DAMAGE. 38 ----------------------------------------------------------------------------- 39 */ 40 41 42 /* This module contains mode-dependent macro and structure definitions. The 43 file is #included by pcre2_internal.h if PCRE2_CODE_UNIT_WIDTH is defined. 44 These mode-dependent items are kept in a separate file so that they can also be 45 #included multiple times for different code unit widths by pcre2test in order 46 to have access to the hidden structures at all supported widths. 47 48 Some of the mode-dependent macros are required at different widths for 49 different parts of the pcre2test code (in particular, the included 50 pcre_printint.c file). We undefine them here so that they can be re-defined for 51 multiple inclusions. Not all of these are used in pcre2test, but it's easier 52 just to undefine them all. */ 53 54 #undef ACROSSCHAR 55 #undef BACKCHAR 56 #undef BYTES2CU 57 #undef CHMAX_255 58 #undef CU2BYTES 59 #undef FORWARDCHAR 60 #undef FORWARDCHARTEST 61 #undef GET 62 #undef GET2 63 #undef GETCHAR 64 #undef GETCHARINC 65 #undef GETCHARINCTEST 66 #undef GETCHARLEN 67 #undef GETCHARLENTEST 68 #undef GETCHARTEST 69 #undef GET_EXTRALEN 70 #undef HAS_EXTRALEN 71 #undef IMM2_SIZE 72 #undef MAX_255 73 #undef MAX_MARK 74 #undef MAX_PATTERN_SIZE 75 #undef MAX_UTF_SINGLE_CU 76 #undef NOT_FIRSTCU 77 #undef PUT 78 #undef PUT2 79 #undef PUT2INC 80 #undef PUTCHAR 81 #undef PUTINC 82 #undef TABLE_GET 83 84 85 86 /* -------------------------- MACROS ----------------------------- */ 87 88 /* PCRE keeps offsets in its compiled code as at least 16-bit quantities 89 (always stored in big-endian order in 8-bit mode) by default. These are used, 90 for example, to link from the start of a subpattern to its alternatives and its 91 end. The use of 16 bits per offset limits the size of an 8-bit compiled regex 92 to around 64K, which is big enough for almost everybody. However, I received a 93 request for an even bigger limit. For this reason, and also to make the code 94 easier to maintain, the storing and loading of offsets from the compiled code 95 unit string is now handled by the macros that are defined here. 96 97 The macros are controlled by the value of LINK_SIZE. This defaults to 2, but 98 values of 3 or 4 are also supported. */ 99 100 /* ------------------- 8-bit support ------------------ */ 101 102 #if PCRE2_CODE_UNIT_WIDTH == 8 103 104 #if LINK_SIZE == 2 105 #define PUT(a,n,d) \ 106 (a[n] = (PCRE2_UCHAR)((d) >> 8)), \ 107 (a[(n)+1] = (PCRE2_UCHAR)((d) & 255)) 108 #define GET(a,n) \ 109 (unsigned int)(((a)[n] << 8) | (a)[(n)+1]) 110 #define MAX_PATTERN_SIZE (1 << 16) 111 112 #elif LINK_SIZE == 3 113 #define PUT(a,n,d) \ 114 (a[n] = (PCRE2_UCHAR)((d) >> 16)), \ 115 (a[(n)+1] = (PCRE2_UCHAR)((d) >> 8)), \ 116 (a[(n)+2] = (PCRE2_UCHAR)((d) & 255)) 117 #define GET(a,n) \ 118 (unsigned int)(((a)[n] << 16) | ((a)[(n)+1] << 8) | (a)[(n)+2]) 119 #define MAX_PATTERN_SIZE (1 << 24) 120 121 #elif LINK_SIZE == 4 122 #define PUT(a,n,d) \ 123 (a[n] = (PCRE2_UCHAR)((d) >> 24)), \ 124 (a[(n)+1] = (PCRE2_UCHAR)((d) >> 16)), \ 125 (a[(n)+2] = (PCRE2_UCHAR)((d) >> 8)), \ 126 (a[(n)+3] = (PCRE2_UCHAR)((d) & 255)) 127 #define GET(a,n) \ 128 (unsigned int)(((a)[n] << 24) | ((a)[(n)+1] << 16) | ((a)[(n)+2] << 8) | (a)[(n)+3]) 129 #define MAX_PATTERN_SIZE (1 << 30) /* Keep it positive */ 130 131 #else 132 #error LINK_SIZE must be 2, 3, or 4 133 #endif 134 135 136 /* ------------------- 16-bit support ------------------ */ 137 138 #elif PCRE2_CODE_UNIT_WIDTH == 16 139 140 #if LINK_SIZE == 2 141 #undef LINK_SIZE 142 #define LINK_SIZE 1 143 #define PUT(a,n,d) \ 144 (a[n] = (PCRE2_UCHAR)(d)) 145 #define GET(a,n) \ 146 (a[n]) 147 #define MAX_PATTERN_SIZE (1 << 16) 148 149 #elif LINK_SIZE == 3 || LINK_SIZE == 4 150 #undef LINK_SIZE 151 #define LINK_SIZE 2 152 #define PUT(a,n,d) \ 153 (a[n] = (PCRE2_UCHAR)((d) >> 16)), \ 154 (a[(n)+1] = (PCRE2_UCHAR)((d) & 65535)) 155 #define GET(a,n) \ 156 (unsigned int)(((a)[n] << 16) | (a)[(n)+1]) 157 #define MAX_PATTERN_SIZE (1 << 30) /* Keep it positive */ 158 159 #else 160 #error LINK_SIZE must be 2, 3, or 4 161 #endif 162 163 164 /* ------------------- 32-bit support ------------------ */ 165 166 #elif PCRE2_CODE_UNIT_WIDTH == 32 167 #undef LINK_SIZE 168 #define LINK_SIZE 1 169 #define PUT(a,n,d) \ 170 (a[n] = (d)) 171 #define GET(a,n) \ 172 (a[n]) 173 #define MAX_PATTERN_SIZE (1 << 30) /* Keep it positive */ 174 175 #else 176 #error Unsupported compiling mode 177 #endif 178 179 180 /* --------------- Other mode-specific macros ----------------- */ 181 182 /* PCRE uses some other (at least) 16-bit quantities that do not change when 183 the size of offsets changes. There are used for repeat counts and for other 184 things such as capturing parenthesis numbers in back references. 185 186 Define the number of code units required to hold a 16-bit count/offset, and 187 macros to load and store such a value. For reasons that I do not understand, 188 the expression in the 8-bit GET2 macro is treated by gcc as a signed 189 expression, even when a is declared as unsigned. It seems that any kind of 190 arithmetic results in a signed value. Hence the cast. */ 191 192 #if PCRE2_CODE_UNIT_WIDTH == 8 193 #define IMM2_SIZE 2 194 #define GET2(a,n) (unsigned int)(((a)[n] << 8) | (a)[(n)+1]) 195 #define PUT2(a,n,d) a[n] = (d) >> 8, a[(n)+1] = (d) & 255 196 197 #else /* Code units are 16 or 32 bits */ 198 #define IMM2_SIZE 1 199 #define GET2(a,n) a[n] 200 #define PUT2(a,n,d) a[n] = d 201 #endif 202 203 /* Other macros that are different for 8-bit mode. The MAX_255 macro checks 204 whether its argument, which is assumed to be one code unit, is less than 256. 205 The CHMAX_255 macro does not assume one code unit. The maximum length of a MARK 206 name must fit in one code unit; currently it is set to 255 or 65535. The 207 TABLE_GET macro is used to access elements of tables containing exactly 256 208 items. Its argument is a code unit. When code points can be greater than 255, a 209 check is needed before accessing these tables. */ 210 211 #if PCRE2_CODE_UNIT_WIDTH == 8 212 #define MAX_255(c) TRUE 213 #define MAX_MARK ((1u << 8) - 1) 214 #define TABLE_GET(c, table, default) ((table)[c]) 215 #ifdef SUPPORT_UNICODE 216 #define SUPPORT_WIDE_CHARS 217 #define CHMAX_255(c) ((c) <= 255u) 218 #else 219 #define CHMAX_255(c) TRUE 220 #endif /* SUPPORT_UNICODE */ 221 222 #else /* Code units are 16 or 32 bits */ 223 #define CHMAX_255(c) ((c) <= 255u) 224 #define MAX_255(c) ((c) <= 255u) 225 #define MAX_MARK ((1u << 16) - 1) 226 #define SUPPORT_WIDE_CHARS 227 #define TABLE_GET(c, table, default) (MAX_255(c)? ((table)[c]):(default)) 228 #endif 229 230 231 /* ----------------- Character-handling macros ----------------- */ 232 233 /* There is a proposed future special "UTF-21" mode, in which only the lowest 234 21 bits of a 32-bit character are interpreted as UTF, with the remaining 11 235 high-order bits available to the application for other uses. In preparation for 236 the future implementation of this mode, there are macros that load a data item 237 and, if in this special mode, mask it to 21 bits. These macros all have names 238 starting with UCHAR21. In all other modes, including the normal 32-bit 239 library, the macros all have the same simple definitions. When the new mode is 240 implemented, it is expected that these definitions will be varied appropriately 241 using #ifdef when compiling the library that supports the special mode. */ 242 243 #define UCHAR21(eptr) (*(eptr)) 244 #define UCHAR21TEST(eptr) (*(eptr)) 245 #define UCHAR21INC(eptr) (*(eptr)++) 246 #define UCHAR21INCTEST(eptr) (*(eptr)++) 247 248 /* When UTF encoding is being used, a character is no longer just a single 249 byte in 8-bit mode or a single short in 16-bit mode. The macros for character 250 handling generate simple sequences when used in the basic mode, and more 251 complicated ones for UTF characters. GETCHARLENTEST and other macros are not 252 used when UTF is not supported. To make sure they can never even appear when 253 UTF support is omitted, we don't even define them. */ 254 255 #ifndef SUPPORT_UNICODE 256 257 /* #define MAX_UTF_SINGLE_CU */ 258 /* #define HAS_EXTRALEN(c) */ 259 /* #define GET_EXTRALEN(c) */ 260 /* #define NOT_FIRSTCU(c) */ 261 #define GETCHAR(c, eptr) c = *eptr; 262 #define GETCHARTEST(c, eptr) c = *eptr; 263 #define GETCHARINC(c, eptr) c = *eptr++; 264 #define GETCHARINCTEST(c, eptr) c = *eptr++; 265 #define GETCHARLEN(c, eptr, len) c = *eptr; 266 #define PUTCHAR(c, p) (*p = c, 1) 267 /* #define GETCHARLENTEST(c, eptr, len) */ 268 /* #define BACKCHAR(eptr) */ 269 /* #define FORWARDCHAR(eptr) */ 270 /* #define FORWARCCHARTEST(eptr,end) */ 271 /* #define ACROSSCHAR(condition, eptr, action) */ 272 273 #else /* SUPPORT_UNICODE */ 274 275 /* ------------------- 8-bit support ------------------ */ 276 277 #if PCRE2_CODE_UNIT_WIDTH == 8 278 #define MAYBE_UTF_MULTI /* UTF chars may use multiple code units */ 279 280 /* The largest UTF code point that can be encoded as a single code unit. */ 281 282 #define MAX_UTF_SINGLE_CU 127 283 284 /* Tests whether the code point needs extra characters to decode. */ 285 286 #define HAS_EXTRALEN(c) HASUTF8EXTRALEN(c) 287 288 /* Returns with the additional number of characters if IS_MULTICHAR(c) is TRUE. 289 Otherwise it has an undefined behaviour. */ 290 291 #define GET_EXTRALEN(c) (PRIV(utf8_table4)[(c) & 0x3fu]) 292 293 /* Returns TRUE, if the given value is not the first code unit of a UTF 294 sequence. */ 295 296 #define NOT_FIRSTCU(c) (((c) & 0xc0u) == 0x80u) 297 298 /* Get the next UTF-8 character, not advancing the pointer. This is called when 299 we know we are in UTF-8 mode. */ 300 301 #define GETCHAR(c, eptr) \ 302 c = *eptr; \ 303 if (c >= 0xc0u) GETUTF8(c, eptr); 304 305 /* Get the next UTF-8 character, testing for UTF-8 mode, and not advancing the 306 pointer. */ 307 308 #define GETCHARTEST(c, eptr) \ 309 c = *eptr; \ 310 if (utf && c >= 0xc0u) GETUTF8(c, eptr); 311 312 /* Get the next UTF-8 character, advancing the pointer. This is called when we 313 know we are in UTF-8 mode. */ 314 315 #define GETCHARINC(c, eptr) \ 316 c = *eptr++; \ 317 if (c >= 0xc0u) GETUTF8INC(c, eptr); 318 319 /* Get the next character, testing for UTF-8 mode, and advancing the pointer. 320 This is called when we don't know if we are in UTF-8 mode. */ 321 322 #define GETCHARINCTEST(c, eptr) \ 323 c = *eptr++; \ 324 if (utf && c >= 0xc0u) GETUTF8INC(c, eptr); 325 326 /* Get the next UTF-8 character, not advancing the pointer, incrementing length 327 if there are extra bytes. This is called when we know we are in UTF-8 mode. */ 328 329 #define GETCHARLEN(c, eptr, len) \ 330 c = *eptr; \ 331 if (c >= 0xc0u) GETUTF8LEN(c, eptr, len); 332 333 /* Get the next UTF-8 character, testing for UTF-8 mode, not advancing the 334 pointer, incrementing length if there are extra bytes. This is called when we 335 do not know if we are in UTF-8 mode. */ 336 337 #define GETCHARLENTEST(c, eptr, len) \ 338 c = *eptr; \ 339 if (utf && c >= 0xc0u) GETUTF8LEN(c, eptr, len); 340 341 /* If the pointer is not at the start of a character, move it back until 342 it is. This is called only in UTF-8 mode - we don't put a test within the macro 343 because almost all calls are already within a block of UTF-8 only code. */ 344 345 #define BACKCHAR(eptr) while((*eptr & 0xc0u) == 0x80u) eptr-- 346 347 /* Same as above, just in the other direction. */ 348 #define FORWARDCHAR(eptr) while((*eptr & 0xc0u) == 0x80u) eptr++ 349 #define FORWARDCHARTEST(eptr,end) while(eptr < end && (*eptr & 0xc0u) == 0x80u) eptr++ 350 351 /* Same as above, but it allows a fully customizable form. */ 352 #define ACROSSCHAR(condition, eptr, action) \ 353 while((condition) && ((*eptr) & 0xc0u) == 0x80u) action 354 355 /* Deposit a character into memory, returning the number of code units. */ 356 357 #define PUTCHAR(c, p) ((utf && c > MAX_UTF_SINGLE_CU)? \ 358 PRIV(ord2utf)(c,p) : (*p = c, 1)) 359 360 361 /* ------------------- 16-bit support ------------------ */ 362 363 #elif PCRE2_CODE_UNIT_WIDTH == 16 364 #define MAYBE_UTF_MULTI /* UTF chars may use multiple code units */ 365 366 /* The largest UTF code point that can be encoded as a single code unit. */ 367 368 #define MAX_UTF_SINGLE_CU 65535 369 370 /* Tests whether the code point needs extra characters to decode. */ 371 372 #define HAS_EXTRALEN(c) (((c) & 0xfc00u) == 0xd800u) 373 374 /* Returns with the additional number of characters if IS_MULTICHAR(c) is TRUE. 375 Otherwise it has an undefined behaviour. */ 376 377 #define GET_EXTRALEN(c) 1 378 379 /* Returns TRUE, if the given value is not the first code unit of a UTF 380 sequence. */ 381 382 #define NOT_FIRSTCU(c) (((c) & 0xfc00u) == 0xdc00u) 383 384 /* Base macro to pick up the low surrogate of a UTF-16 character, not 385 advancing the pointer. */ 386 387 #define GETUTF16(c, eptr) \ 388 { c = (((c & 0x3ffu) << 10) | (eptr[1] & 0x3ffu)) + 0x10000u; } 389 390 /* Get the next UTF-16 character, not advancing the pointer. This is called when 391 we know we are in UTF-16 mode. */ 392 393 #define GETCHAR(c, eptr) \ 394 c = *eptr; \ 395 if ((c & 0xfc00u) == 0xd800u) GETUTF16(c, eptr); 396 397 /* Get the next UTF-16 character, testing for UTF-16 mode, and not advancing the 398 pointer. */ 399 400 #define GETCHARTEST(c, eptr) \ 401 c = *eptr; \ 402 if (utf && (c & 0xfc00u) == 0xd800u) GETUTF16(c, eptr); 403 404 /* Base macro to pick up the low surrogate of a UTF-16 character, advancing 405 the pointer. */ 406 407 #define GETUTF16INC(c, eptr) \ 408 { c = (((c & 0x3ffu) << 10) | (*eptr++ & 0x3ffu)) + 0x10000u; } 409 410 /* Get the next UTF-16 character, advancing the pointer. This is called when we 411 know we are in UTF-16 mode. */ 412 413 #define GETCHARINC(c, eptr) \ 414 c = *eptr++; \ 415 if ((c & 0xfc00u) == 0xd800u) GETUTF16INC(c, eptr); 416 417 /* Get the next character, testing for UTF-16 mode, and advancing the pointer. 418 This is called when we don't know if we are in UTF-16 mode. */ 419 420 #define GETCHARINCTEST(c, eptr) \ 421 c = *eptr++; \ 422 if (utf && (c & 0xfc00u) == 0xd800u) GETUTF16INC(c, eptr); 423 424 /* Base macro to pick up the low surrogate of a UTF-16 character, not 425 advancing the pointer, incrementing the length. */ 426 427 #define GETUTF16LEN(c, eptr, len) \ 428 { c = (((c & 0x3ffu) << 10) | (eptr[1] & 0x3ffu)) + 0x10000u; len++; } 429 430 /* Get the next UTF-16 character, not advancing the pointer, incrementing 431 length if there is a low surrogate. This is called when we know we are in 432 UTF-16 mode. */ 433 434 #define GETCHARLEN(c, eptr, len) \ 435 c = *eptr; \ 436 if ((c & 0xfc00u) == 0xd800u) GETUTF16LEN(c, eptr, len); 437 438 /* Get the next UTF-816character, testing for UTF-16 mode, not advancing the 439 pointer, incrementing length if there is a low surrogate. This is called when 440 we do not know if we are in UTF-16 mode. */ 441 442 #define GETCHARLENTEST(c, eptr, len) \ 443 c = *eptr; \ 444 if (utf && (c & 0xfc00u) == 0xd800u) GETUTF16LEN(c, eptr, len); 445 446 /* If the pointer is not at the start of a character, move it back until 447 it is. This is called only in UTF-16 mode - we don't put a test within the 448 macro because almost all calls are already within a block of UTF-16 only 449 code. */ 450 451 #define BACKCHAR(eptr) if ((*eptr & 0xfc00u) == 0xdc00u) eptr-- 452 453 /* Same as above, just in the other direction. */ 454 #define FORWARDCHAR(eptr) if ((*eptr & 0xfc00u) == 0xdc00u) eptr++ 455 #define FORWARDCHARTEST(eptr,end) if (eptr < end && (*eptr & 0xfc00u) == 0xdc00u) eptr++ 456 457 /* Same as above, but it allows a fully customizable form. */ 458 #define ACROSSCHAR(condition, eptr, action) \ 459 if ((condition) && ((*eptr) & 0xfc00u) == 0xdc00u) action 460 461 /* Deposit a character into memory, returning the number of code units. */ 462 463 #define PUTCHAR(c, p) ((utf && c > MAX_UTF_SINGLE_CU)? \ 464 PRIV(ord2utf)(c,p) : (*p = c, 1)) 465 466 467 /* ------------------- 32-bit support ------------------ */ 468 469 #else 470 471 /* These are trivial for the 32-bit library, since all UTF-32 characters fit 472 into one PCRE2_UCHAR unit. */ 473 474 #define MAX_UTF_SINGLE_CU (0x10ffffu) 475 #define HAS_EXTRALEN(c) (0) 476 #define GET_EXTRALEN(c) (0) 477 #define NOT_FIRSTCU(c) (0) 478 479 /* Get the next UTF-32 character, not advancing the pointer. This is called when 480 we know we are in UTF-32 mode. */ 481 482 #define GETCHAR(c, eptr) \ 483 c = *(eptr); 484 485 /* Get the next UTF-32 character, testing for UTF-32 mode, and not advancing the 486 pointer. */ 487 488 #define GETCHARTEST(c, eptr) \ 489 c = *(eptr); 490 491 /* Get the next UTF-32 character, advancing the pointer. This is called when we 492 know we are in UTF-32 mode. */ 493 494 #define GETCHARINC(c, eptr) \ 495 c = *((eptr)++); 496 497 /* Get the next character, testing for UTF-32 mode, and advancing the pointer. 498 This is called when we don't know if we are in UTF-32 mode. */ 499 500 #define GETCHARINCTEST(c, eptr) \ 501 c = *((eptr)++); 502 503 /* Get the next UTF-32 character, not advancing the pointer, not incrementing 504 length (since all UTF-32 is of length 1). This is called when we know we are in 505 UTF-32 mode. */ 506 507 #define GETCHARLEN(c, eptr, len) \ 508 GETCHAR(c, eptr) 509 510 /* Get the next UTF-32character, testing for UTF-32 mode, not advancing the 511 pointer, not incrementing the length (since all UTF-32 is of length 1). 512 This is called when we do not know if we are in UTF-32 mode. */ 513 514 #define GETCHARLENTEST(c, eptr, len) \ 515 GETCHARTEST(c, eptr) 516 517 /* If the pointer is not at the start of a character, move it back until 518 it is. This is called only in UTF-32 mode - we don't put a test within the 519 macro because almost all calls are already within a block of UTF-32 only 520 code. 521 522 These are all no-ops since all UTF-32 characters fit into one PCRE2_UCHAR. */ 523 524 #define BACKCHAR(eptr) do { } while (0) 525 526 /* Same as above, just in the other direction. */ 527 528 #define FORWARDCHAR(eptr) do { } while (0) 529 #define FORWARDCHARTEST(eptr,end) do { } while (0) 530 531 /* Same as above, but it allows a fully customizable form. */ 532 533 #define ACROSSCHAR(condition, eptr, action) do { } while (0) 534 535 /* Deposit a character into memory, returning the number of code units. */ 536 537 #define PUTCHAR(c, p) (*p = c, 1) 538 539 #endif /* UTF-32 character handling */ 540 #endif /* SUPPORT_UNICODE */ 541 542 543 /* Mode-dependent macros that have the same definition in all modes. */ 544 545 #define CU2BYTES(x) ((x)*((PCRE2_CODE_UNIT_WIDTH/8))) 546 #define BYTES2CU(x) ((x)/((PCRE2_CODE_UNIT_WIDTH/8))) 547 #define PUTINC(a,n,d) PUT(a,n,d), a += LINK_SIZE 548 #define PUT2INC(a,n,d) PUT2(a,n,d), a += IMM2_SIZE 549 550 551 /* ----------------------- HIDDEN STRUCTURES ----------------------------- */ 552 553 /* NOTE: All these structures *must* start with a pcre2_memctl structure. The 554 code that uses them is simpler because it assumes this. */ 555 556 /* The real general context structure. At present it holds only data for custom 557 memory control. */ 558 559 typedef struct pcre2_real_general_context { 560 pcre2_memctl memctl; 561 } pcre2_real_general_context; 562 563 /* The real compile context structure */ 564 565 typedef struct pcre2_real_compile_context { 566 pcre2_memctl memctl; 567 int (*stack_guard)(uint32_t, void *); 568 void *stack_guard_data; 569 const uint8_t *tables; 570 PCRE2_SIZE max_pattern_length; 571 uint16_t bsr_convention; 572 uint16_t newline_convention; 573 uint32_t parens_nest_limit; 574 uint32_t extra_options; 575 } pcre2_real_compile_context; 576 577 /* The real match context structure. */ 578 579 typedef struct pcre2_real_match_context { 580 pcre2_memctl memctl; 581 #ifdef SUPPORT_JIT 582 pcre2_jit_callback jit_callback; 583 void *jit_callback_data; 584 #endif 585 int (*callout)(pcre2_callout_block *, void *); 586 void *callout_data; 587 int (*substitute_callout)(pcre2_substitute_callout_block *, void *); 588 void *substitute_callout_data; 589 PCRE2_SIZE offset_limit; 590 uint32_t heap_limit; 591 uint32_t match_limit; 592 uint32_t depth_limit; 593 } pcre2_real_match_context; 594 595 /* The real convert context structure. */ 596 597 typedef struct pcre2_real_convert_context { 598 pcre2_memctl memctl; 599 uint32_t glob_separator; 600 uint32_t glob_escape; 601 } pcre2_real_convert_context; 602 603 /* The real compiled code structure. The type for the blocksize field is 604 defined specially because it is required in pcre2_serialize_decode() when 605 copying the size from possibly unaligned memory into a variable of the same 606 type. Use a macro rather than a typedef to avoid compiler warnings when this 607 file is included multiple times by pcre2test. LOOKBEHIND_MAX specifies the 608 largest lookbehind that is supported. (OP_REVERSE in a pattern has a 16-bit 609 argument in 8-bit and 16-bit modes, so we need no more than a 16-bit field 610 here.) */ 611 612 #undef CODE_BLOCKSIZE_TYPE 613 #define CODE_BLOCKSIZE_TYPE size_t 614 615 #undef LOOKBEHIND_MAX 616 #define LOOKBEHIND_MAX UINT16_MAX 617 618 typedef struct pcre2_real_code { 619 pcre2_memctl memctl; /* Memory control fields */ 620 const uint8_t *tables; /* The character tables */ 621 void *executable_jit; /* Pointer to JIT code */ 622 uint8_t start_bitmap[32]; /* Bitmap for starting code unit < 256 */ 623 CODE_BLOCKSIZE_TYPE blocksize; /* Total (bytes) that was malloc-ed */ 624 uint32_t magic_number; /* Paranoid and endianness check */ 625 uint32_t compile_options; /* Options passed to pcre2_compile() */ 626 uint32_t overall_options; /* Options after processing the pattern */ 627 uint32_t extra_options; /* Taken from compile_context */ 628 uint32_t flags; /* Various state flags */ 629 uint32_t limit_heap; /* Limit set in the pattern */ 630 uint32_t limit_match; /* Limit set in the pattern */ 631 uint32_t limit_depth; /* Limit set in the pattern */ 632 uint32_t first_codeunit; /* Starting code unit */ 633 uint32_t last_codeunit; /* This codeunit must be seen */ 634 uint16_t bsr_convention; /* What \R matches */ 635 uint16_t newline_convention; /* What is a newline? */ 636 uint16_t max_lookbehind; /* Longest lookbehind (characters) */ 637 uint16_t minlength; /* Minimum length of match */ 638 uint16_t top_bracket; /* Highest numbered group */ 639 uint16_t top_backref; /* Highest numbered back reference */ 640 uint16_t name_entry_size; /* Size (code units) of table entries */ 641 uint16_t name_count; /* Number of name entries in the table */ 642 } pcre2_real_code; 643 644 /* The real match data structure. Define ovector as large as it can ever 645 actually be so that array bound checkers don't grumble. Memory for this 646 structure is obtained by calling pcre2_match_data_create(), which sets the size 647 as the offset of ovector plus a pair of elements for each capturable string, so 648 the size varies from call to call. As the maximum number of capturing 649 subpatterns is 65535 we must allow for 65536 strings to include the overall 650 match. (See also the heapframe structure below.) */ 651 652 struct heapframe; /* Forward reference */ 653 654 typedef struct pcre2_real_match_data { 655 pcre2_memctl memctl; /* Memory control fields */ 656 const pcre2_real_code *code; /* The pattern used for the match */ 657 PCRE2_SPTR subject; /* The subject that was matched */ 658 PCRE2_SPTR mark; /* Pointer to last mark */ 659 struct heapframe *heapframes; /* Backtracking frames heap memory */ 660 PCRE2_SIZE heapframes_size; /* Malloc-ed size */ 661 PCRE2_SIZE leftchar; /* Offset to leftmost code unit */ 662 PCRE2_SIZE rightchar; /* Offset to rightmost code unit */ 663 PCRE2_SIZE startchar; /* Offset to starting code unit */ 664 uint8_t matchedby; /* Type of match (normal, JIT, DFA) */ 665 uint8_t flags; /* Various flags */ 666 uint16_t oveccount; /* Number of pairs */ 667 int rc; /* The return code from the match */ 668 PCRE2_SIZE ovector[131072]; /* Must be last in the structure */ 669 } pcre2_real_match_data; 670 671 672 /* ----------------------- PRIVATE STRUCTURES ----------------------------- */ 673 674 /* These structures are not needed for pcre2test. */ 675 676 #ifndef PCRE2_PCRE2TEST 677 678 /* Structures for checking for mutual recursion when scanning compiled or 679 parsed code. */ 680 681 typedef struct recurse_check { 682 struct recurse_check *prev; 683 PCRE2_SPTR group; 684 } recurse_check; 685 686 typedef struct parsed_recurse_check { 687 struct parsed_recurse_check *prev; 688 uint32_t *groupptr; 689 } parsed_recurse_check; 690 691 /* Structure for building a cache when filling in recursion offsets. */ 692 693 typedef struct recurse_cache { 694 PCRE2_SPTR group; 695 int groupnumber; 696 } recurse_cache; 697 698 /* Structure for maintaining a chain of pointers to the currently incomplete 699 branches, for testing for left recursion while compiling. */ 700 701 typedef struct branch_chain { 702 struct branch_chain *outer; 703 PCRE2_UCHAR *current_branch; 704 } branch_chain; 705 706 /* Structure for building a list of named groups during the first pass of 707 compiling. */ 708 709 typedef struct named_group { 710 PCRE2_SPTR name; /* Points to the name in the pattern */ 711 uint32_t number; /* Group number */ 712 uint16_t length; /* Length of the name */ 713 uint16_t isdup; /* TRUE if a duplicate */ 714 } named_group; 715 716 /* Structure for passing "static" information around between the functions 717 doing the compiling, so that they are thread-safe. */ 718 719 typedef struct compile_block { 720 pcre2_real_compile_context *cx; /* Points to the compile context */ 721 const uint8_t *lcc; /* Points to lower casing table */ 722 const uint8_t *fcc; /* Points to case-flipping table */ 723 const uint8_t *cbits; /* Points to character type table */ 724 const uint8_t *ctypes; /* Points to table of type maps */ 725 PCRE2_SPTR start_workspace; /* The start of working space */ 726 PCRE2_SPTR start_code; /* The start of the compiled code */ 727 PCRE2_SPTR start_pattern; /* The start of the pattern */ 728 PCRE2_SPTR end_pattern; /* The end of the pattern */ 729 PCRE2_UCHAR *name_table; /* The name/number table */ 730 PCRE2_SIZE workspace_size; /* Size of workspace */ 731 PCRE2_SIZE small_ref_offset[10]; /* Offsets for \1 to \9 */ 732 PCRE2_SIZE erroroffset; /* Offset of error in pattern */ 733 uint16_t names_found; /* Number of entries so far */ 734 uint16_t name_entry_size; /* Size of each entry */ 735 uint16_t parens_depth; /* Depth of nested parentheses */ 736 uint16_t assert_depth; /* Depth of nested assertions */ 737 open_capitem *open_caps; /* Chain of open capture items */ 738 named_group *named_groups; /* Points to vector in pre-compile */ 739 uint32_t named_group_list_size; /* Number of entries in the list */ 740 uint32_t external_options; /* External (initial) options */ 741 uint32_t external_flags; /* External flag bits to be set */ 742 uint32_t bracount; /* Count of capturing parentheses */ 743 uint32_t lastcapture; /* Last capture encountered */ 744 uint32_t *parsed_pattern; /* Parsed pattern buffer */ 745 uint32_t *parsed_pattern_end; /* Parsed pattern should not get here */ 746 uint32_t *groupinfo; /* Group info vector */ 747 uint32_t top_backref; /* Maximum back reference */ 748 uint32_t backref_map; /* Bitmap of low back refs */ 749 uint32_t nltype; /* Newline type */ 750 uint32_t nllen; /* Newline string length */ 751 uint32_t class_range_start; /* Overall class range start */ 752 uint32_t class_range_end; /* Overall class range end */ 753 PCRE2_UCHAR nl[4]; /* Newline string when fixed length */ 754 uint32_t req_varyopt; /* "After variable item" flag for reqbyte */ 755 int max_lookbehind; /* Maximum lookbehind (characters) */ 756 BOOL had_accept; /* (*ACCEPT) encountered */ 757 BOOL had_pruneorskip; /* (*PRUNE) or (*SKIP) encountered */ 758 BOOL had_recurse; /* Had a recursion or subroutine call */ 759 BOOL dupnames; /* Duplicate names exist */ 760 } compile_block; 761 762 /* Structure for keeping the properties of the in-memory stack used 763 by the JIT matcher. */ 764 765 typedef struct pcre2_real_jit_stack { 766 pcre2_memctl memctl; 767 void* stack; 768 } pcre2_real_jit_stack; 769 770 /* Structure for items in a linked list that represents an explicit recursive 771 call within the pattern when running pcre2_dfa_match(). */ 772 773 typedef struct dfa_recursion_info { 774 struct dfa_recursion_info *prevrec; 775 PCRE2_SPTR subject_position; 776 uint32_t group_num; 777 } dfa_recursion_info; 778 779 /* Structure for "stack" frames that are used for remembering backtracking 780 positions during matching. As these are used in a vector, with the ovector item 781 being extended, the size of the structure must be a multiple of PCRE2_SIZE. The 782 only way to check this at compile time is to force an error by generating an 783 array with a negative size. By putting this in a typedef (which is never used), 784 we don't generate any code when all is well. */ 785 786 typedef struct heapframe { 787 788 /* The first set of fields are variables that have to be preserved over calls 789 to RRMATCH(), but which do not need to be copied to new frames. */ 790 791 PCRE2_SPTR ecode; /* The current position in the pattern */ 792 PCRE2_SPTR temp_sptr[2]; /* Used for short-term PCRE_SPTR values */ 793 PCRE2_SIZE length; /* Used for character, string, or code lengths */ 794 PCRE2_SIZE back_frame; /* Amount to subtract on RRETURN */ 795 PCRE2_SIZE temp_size; /* Used for short-term PCRE2_SIZE values */ 796 uint32_t rdepth; /* "Recursion" depth */ 797 uint32_t group_frame_type; /* Type information for group frames */ 798 uint32_t temp_32[4]; /* Used for short-term 32-bit or BOOL values */ 799 uint8_t return_id; /* Where to go on in internal "return" */ 800 uint8_t op; /* Processing opcode */ 801 802 /* At this point, the structure is 16-bit aligned. On most architectures 803 the alignment requirement for a pointer will ensure that the eptr field below 804 is 32-bit or 64-bit aligned. However, on m68k it is fine to have a pointer 805 that is 16-bit aligned. We must therefore ensure that what comes between here 806 and eptr is an odd multiple of 16 bits so as to get back into 32-bit 807 alignment. This happens naturally when PCRE2_UCHAR is 8 bits wide, but needs 808 fudges in the other cases. In the 32-bit case the padding comes first so that 809 the occu field itself is 32-bit aligned. Without the padding, this structure 810 is no longer a multiple of PCRE2_SIZE on m68k, and the check below fails. */ 811 812 #if PCRE2_CODE_UNIT_WIDTH == 8 813 PCRE2_UCHAR occu[6]; /* Used for other case code units */ 814 #elif PCRE2_CODE_UNIT_WIDTH == 16 815 PCRE2_UCHAR occu[2]; /* Used for other case code units */ 816 uint8_t unused[2]; /* Ensure 32-bit alignment (see above) */ 817 #else 818 uint8_t unused[2]; /* Ensure 32-bit alignment (see above) */ 819 PCRE2_UCHAR occu[1]; /* Used for other case code units */ 820 #endif 821 822 /* The rest have to be copied from the previous frame whenever a new frame 823 becomes current. The final field is specified as a large vector so that 824 runtime array bound checks don't catch references to it. However, for any 825 specific call to pcre2_match() the memory allocated for each frame structure 826 allows for exactly the right size ovector for the number of capturing 827 parentheses. (See also the comment for pcre2_real_match_data above.) */ 828 829 PCRE2_SPTR eptr; /* MUST BE FIRST */ 830 PCRE2_SPTR start_match; /* Can be adjusted by \K */ 831 PCRE2_SPTR mark; /* Most recent mark on the success path */ 832 uint32_t current_recurse; /* Current (deepest) recursion number */ 833 uint32_t capture_last; /* Most recent capture */ 834 PCRE2_SIZE last_group_offset; /* Saved offset to most recent group frame */ 835 PCRE2_SIZE offset_top; /* Offset after highest capture */ 836 PCRE2_SIZE ovector[131072]; /* Must be last in the structure */ 837 } heapframe; 838 839 /* This typedef is a check that the size of the heapframe structure is a 840 multiple of PCRE2_SIZE. See various comments above. */ 841 842 typedef char check_heapframe_size[ 843 ((sizeof(heapframe) % sizeof(PCRE2_SIZE)) == 0)? (+1):(-1)]; 844 845 /* Structure for computing the alignment of heapframe. */ 846 847 typedef struct heapframe_align { 848 char unalign; /* Completely unalign the current offset */ 849 heapframe frame; /* Offset is its alignment */ 850 } heapframe_align; 851 852 /* This define is the minimum alignment required for a heapframe, in bytes. */ 853 854 #define HEAPFRAME_ALIGNMENT offsetof(heapframe_align, frame) 855 856 /* Structure for passing "static" information around between the functions 857 doing traditional NFA matching (pcre2_match() and friends). */ 858 859 typedef struct match_block { 860 pcre2_memctl memctl; /* For general use */ 861 PCRE2_SIZE heap_limit; /* As it says */ 862 uint32_t match_limit; /* As it says */ 863 uint32_t match_limit_depth; /* As it says */ 864 uint32_t match_call_count; /* Number of times a new frame is created */ 865 BOOL hitend; /* Hit the end of the subject at some point */ 866 BOOL hasthen; /* Pattern contains (*THEN) */ 867 BOOL allowemptypartial; /* Allow empty hard partial */ 868 const uint8_t *lcc; /* Points to lower casing table */ 869 const uint8_t *fcc; /* Points to case-flipping table */ 870 const uint8_t *ctypes; /* Points to table of type maps */ 871 PCRE2_SIZE start_offset; /* The start offset value */ 872 PCRE2_SIZE end_offset_top; /* Highwater mark at end of match */ 873 uint16_t partial; /* PARTIAL options */ 874 uint16_t bsr_convention; /* \R interpretation */ 875 uint16_t name_count; /* Number of names in name table */ 876 uint16_t name_entry_size; /* Size of entry in names table */ 877 PCRE2_SPTR name_table; /* Table of group names */ 878 PCRE2_SPTR start_code; /* For use when recursing */ 879 PCRE2_SPTR start_subject; /* Start of the subject string */ 880 PCRE2_SPTR check_subject; /* Where UTF-checked from */ 881 PCRE2_SPTR end_subject; /* End of the subject string */ 882 PCRE2_SPTR end_match_ptr; /* Subject position at end match */ 883 PCRE2_SPTR start_used_ptr; /* Earliest consulted character */ 884 PCRE2_SPTR last_used_ptr; /* Latest consulted character */ 885 PCRE2_SPTR mark; /* Mark pointer to pass back on success */ 886 PCRE2_SPTR nomatch_mark; /* Mark pointer to pass back on failure */ 887 PCRE2_SPTR verb_ecode_ptr; /* For passing back info */ 888 PCRE2_SPTR verb_skip_ptr; /* For passing back a (*SKIP) name */ 889 uint32_t verb_current_recurse; /* Current recurse when (*VERB) happens */ 890 uint32_t moptions; /* Match options */ 891 uint32_t poptions; /* Pattern options */ 892 uint32_t skip_arg_count; /* For counting SKIP_ARGs */ 893 uint32_t ignore_skip_arg; /* For re-run when SKIP arg name not found */ 894 uint32_t nltype; /* Newline type */ 895 uint32_t nllen; /* Newline string length */ 896 PCRE2_UCHAR nl[4]; /* Newline string when fixed */ 897 pcre2_callout_block *cb; /* Points to a callout block */ 898 void *callout_data; /* To pass back to callouts */ 899 int (*callout)(pcre2_callout_block *,void *); /* Callout function or NULL */ 900 } match_block; 901 902 /* A similar structure is used for the same purpose by the DFA matching 903 functions. */ 904 905 typedef struct dfa_match_block { 906 pcre2_memctl memctl; /* For general use */ 907 PCRE2_SPTR start_code; /* Start of the compiled pattern */ 908 PCRE2_SPTR start_subject ; /* Start of the subject string */ 909 PCRE2_SPTR end_subject; /* End of subject string */ 910 PCRE2_SPTR start_used_ptr; /* Earliest consulted character */ 911 PCRE2_SPTR last_used_ptr; /* Latest consulted character */ 912 const uint8_t *tables; /* Character tables */ 913 PCRE2_SIZE start_offset; /* The start offset value */ 914 PCRE2_SIZE heap_limit; /* As it says */ 915 PCRE2_SIZE heap_used; /* As it says */ 916 uint32_t match_limit; /* As it says */ 917 uint32_t match_limit_depth; /* As it says */ 918 uint32_t match_call_count; /* Number of calls of internal function */ 919 uint32_t moptions; /* Match options */ 920 uint32_t poptions; /* Pattern options */ 921 uint32_t nltype; /* Newline type */ 922 uint32_t nllen; /* Newline string length */ 923 BOOL allowemptypartial; /* Allow empty hard partial */ 924 PCRE2_UCHAR nl[4]; /* Newline string when fixed */ 925 uint16_t bsr_convention; /* \R interpretation */ 926 pcre2_callout_block *cb; /* Points to a callout block */ 927 void *callout_data; /* To pass back to callouts */ 928 int (*callout)(pcre2_callout_block *,void *); /* Callout function or NULL */ 929 dfa_recursion_info *recursive; /* Linked list of recursion data */ 930 } dfa_match_block; 931 932 #endif /* PCRE2_PCRE2TEST */ 933 934 /* End of pcre2_intmodedep.h */ 935
