Update some inclusions of <openssl/macros.h>

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10364)

Update source files for pre-3.0 deprecation

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10364)

Reorganize local header files

Apart from public and internal header files, there is a third type called
local header files, which are located next to source files in the source
direc

Reorganize local header files

Apart from public and internal header files, there is a third type called
local header files, which are located next to source files in the source
directory. Currently, they have different suffixes like

'*_lcl.h', '*_local.h', or '*_int.h'

This commit changes the different suffixes to '*_local.h' uniformly.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)

show more ...

Following the license change, modify the boilerplates in ssl/

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7768)

Refactor the computation of API version limits

Previously, the API version limit was indicated with a numeric version
number. This was "natural" in the pre-3.0.0 because the version was

Refactor the computation of API version limits

Previously, the API version limit was indicated with a numeric version
number. This was "natural" in the pre-3.0.0 because the version was
this simple number.

With 3.0.0, the version is divided into three separate numbers, and
it's only the major number that counts, but we still need to be able
to support pre-3.0.0 version limits.

Therefore, we allow OPENSSL_API_COMPAT to be defined with a pre-3.0.0
style numeric version number or with a simple major number, i.e. can
be defined like this for any application:

-D OPENSSL_API_COMPAT=0x10100000L
-D OPENSSL_API_COMPAT=3

Since the pre-3.0.0 numerical version numbers are high, it's easy to
distinguish between a simple major number and a pre-3.0.0 numerical
version number and to thereby support both forms at the same time.

Internally, we define the following macros depending on the value of
OPENSSL_API_COMPAT:

OPENSSL_API_0_9_8
OPENSSL_API_1_0_0
OPENSSL_API_1_1_0
OPENSSL_API_3

They indicate that functions marked for deprecation in the
corresponding major release shall not be built if defined.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7724)

show more ...

Drop support for OPENSSL_NO_TLS1_3_METHOD

There are no public TLSv1_3_*method() functions so
OPENSSL_NO_TLS1_3_METHOD doesn't make any sense and should be removed.

Reviewed-by:

Drop support for OPENSSL_NO_TLS1_3_METHOD

There are no public TLSv1_3_*method() functions so
OPENSSL_NO_TLS1_3_METHOD doesn't make any sense and should be removed.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3800)

show more ...

Add the SSL_METHOD for TLSv1.3 and all other base changes required

Includes addition of the various options to s_server/s_client. Also adds
one of the new TLS1.3 ciphersuites.

T

Add the SSL_METHOD for TLSv1.3 and all other base changes required

Includes addition of the various options to s_server/s_client. Also adds
one of the new TLS1.3 ciphersuites.

This isn't "real" TLS1.3!! It's identical to TLS1.2 apart from the protocol
and the ciphersuite...and the ciphersuite is just a renamed TLS1.2 one (not
a "real" TLS1.3 ciphersuite).

Reviewed-by: Rich Salz <rsalz@openssl.org>

show more ...

Indent ssl/

Run util/openssl-format-source on ssl/

Some comments and hand-formatted tables were fixed up
manually by disabling auto-formatting.

Reviewed-by: Rich Salz <

Indent ssl/

Run util/openssl-format-source on ssl/

Some comments and hand-formatted tables were fixed up
manually by disabling auto-formatting.

Reviewed-by: Rich Salz <rsalz@openssl.org>

show more ...

Make DTLS1_BAD_VER work with DTLS_client_method()

DTLSv1_client_method() is deprecated, but it was the only way to obtain
DTLS1_BAD_VER support. The SSL_OP_CISCO_ANYCONNECT hack doesn't

Make DTLS1_BAD_VER work with DTLS_client_method()

DTLSv1_client_method() is deprecated, but it was the only way to obtain
DTLS1_BAD_VER support. The SSL_OP_CISCO_ANYCONNECT hack doesn't work with
DTLS_client_method(), and it's relatively non-trivial to make it work without
expanding the hack into lots of places.

So deprecate SSL_OP_CISCO_ANYCONNECT with DTLSv1_client_method(), and make
it work with SSL_CTX_set_{min,max}_proto_version(DTLS1_BAD_VER) instead.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

show more ...

Copyright consolidation 01/10

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>

Allow different protocol version when trying to reuse a session

We now send the highest supported version by the client, even if the session
uses an older version.

This fixes 2

Allow different protocol version when trying to reuse a session

We now send the highest supported version by the client, even if the session
uses an older version.

This fixes 2 problems:
- When you try to reuse a session but the other side doesn't reuse it and
uses a different protocol version the connection will fail.
- When you're trying to reuse a session with an old version you might be
stuck trying to reuse the old version while both sides support a newer
version

Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

GH: #852, MR: #2452

show more ...

Deprecate the use of version-specific methods

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

MR: #1824

Remove /* foo.c */ comments

This was done by the following
find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
print unless $. == 1

Remove /* foo.c */ comments

This was done by the following
find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
print unless $. == 1 && m@/\* .*\.[ch] \*/@;
close ARGV if eof; # Close file to reset $.

And then some hand-editing of other files.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

show more ...

Support disabling any or all TLS or DTLS versions

Some users want to disable SSL 3.0/TLS 1.0/TLS 1.1, and enable just
TLS 1.2. In the future they might want to disable TLS 1.2 and
e

Support disabling any or all TLS or DTLS versions

Some users want to disable SSL 3.0/TLS 1.0/TLS 1.1, and enable just
TLS 1.2. In the future they might want to disable TLS 1.2 and
enable just TLS 1.3, ...

This commit makes it possible to disable any or all of the TLS or
DTLS protocols. It also considerably simplifies the SSL/TLS tests,
by auto-generating the min/max version tests based on the set of
supported protocols (425 explicitly written out tests got replaced
by two loops that generate all 425 tests if all protocols are
enabled, fewer otherwise).

Reviewed-by: Richard Levitte <levitte@openssl.org>

show more ...

Protocol version selection and negotiation rewrite

The protocol selection code is now consolidated in a few consecutive
short functions in a single file and is table driven. Protocol-sp

Protocol version selection and negotiation rewrite

The protocol selection code is now consolidated in a few consecutive
short functions in a single file and is table driven. Protocol-specific
constraints that influence negotiation are moved into the flags
field of the method structure. The same protocol version constraints
are now applied in all code paths. It is now much easier to add
new protocol versions without reworking the protocol selection
logic.

In the presence of "holes" in the list of enabled client protocols
we no longer select client protocols below the hole based on a
subset of the constraints and then fail shortly after when it is
found that these don't meet the remaining constraints (suiteb, FIPS,
security level, ...). Ideally, with the new min/max controls users
will be less likely to create "holes" in the first place.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

show more ...

Ensure the dtls1_get_*_methods work with DTLS_ANY_VERSION

The various dtls1_get*_methods did not handle the DTLS_ANY_VERSION case,
so this needed to be added.

Reviewed-by: Tim H

Ensure the dtls1_get_*_methods work with DTLS_ANY_VERSION

The various dtls1_get*_methods did not handle the DTLS_ANY_VERSION case,
so this needed to be added.

Reviewed-by: Tim Hudson <tjh@openssl.org>

show more ...

Change statem prefix to ossl_statem

Change various state machine functions to use the prefix ossl_statem
instead.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich

Change statem prefix to ossl_statem

Change various state machine functions to use the prefix ossl_statem
instead.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

show more ...

Reorganise state machine files

Pull out the state machine into a separate sub directory. Also moved some
functions which were nothing to do with the state machine but were in state
m

Reorganise state machine files

Pull out the state machine into a separate sub directory. Also moved some
functions which were nothing to do with the state machine but were in state
machine files. Pulled all the SSL_METHOD definitions into one place...most
of those files had very little left in them any more.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

show more ...