Copyright year updates


Reviewed-by: Neil Horman <nhorman@openssl.org>
Release: yes

riscv: Fix cpuid_obj asm checks for sm4/sm3

Similar to #22881 / #23752

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
(Merged fro

riscv: Fix cpuid_obj asm checks for sm4/sm3

Similar to #22881 / #23752

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
(Merged from https://github.com/openssl/openssl/pull/24486)

show more ...

riscv: SM4: Provide a Zvksed-based implementation

The upcoming RISC-V vector crypto extensions feature
a Zvksed extension, that provides SM4-specific instructions.
This patch provide

riscv: SM4: Provide a Zvksed-based implementation

The upcoming RISC-V vector crypto extensions feature
a Zvksed extension, that provides SM4-specific instructions.
This patch provides an implementation that utilizes this
extension if available.

Tested on QEMU and no regressions observed.

Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21923)

show more ...

Copyright year updates


Reviewed-by: Richard Levitte <levitte@openssl.org>
Release: yes

SM4 AESE optimization for ARMv8

Signed-off-by: Xu Yizhou <xuyizhou1@huawei.com>

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merge

SM4 AESE optimization for ARMv8

Signed-off-by: Xu Yizhou <xuyizhou1@huawei.com>

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19914)

show more ...

Update copyright year

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Release: yes

SM4 optimization for ARM by ASIMD

This patch optimizes SM4 for ARM processor using ASIMD instruction

It will improve performance if both of following conditions are met:
1) Inpu

SM4 optimization for ARM by ASIMD

This patch optimizes SM4 for ARM processor using ASIMD instruction

It will improve performance if both of following conditions are met:
1) Input data equal to or more than 4 blocks
2) Cipher mode allows parallelism, including ECB,CTR,GCM or CBC decryption

This patch implements SM4 SBOX lookup in vector registers, with the
benefit of constant processing time over existing C implementation.

It is only enabled for micro-architecture N1/V1. In the ideal scenario,
performance can reach up to 2.7X

When either of above two conditions is not met, e.g. single block input
or CFB/OFB mode, CBC encryption, performance could drop about 50%.

The assembly code has been reviewed internally by ARM engineer
Fangming.Fang@arm.com

Signed-off-by: Daniel Hu <Daniel.Hu@arm.com>

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17951)

show more ...

SM4 optimization for ARM by HW instruction

This patch implements the SM4 optimization for ARM processor,
using SM4 HW instruction, which is an optional feature of
crypto extension fo

SM4 optimization for ARM by HW instruction

This patch implements the SM4 optimization for ARM processor,
using SM4 HW instruction, which is an optional feature of
crypto extension for aarch64 V8.

Tested on some modern ARM micro-architectures with SM4 support, the
performance uplift can be observed around 8X~40X over existing
C implementation in openssl. Algorithms that can be parallelized
(like CTR, ECB, CBC decryption) are on higher end, with algorithm
like CBC encryption on lower end (due to inter-block dependency)

Perf data on Yitian-710 2.75GHz hardware, before and after optimization:

Before:
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes 16384 bytes
SM4-CTR 105787.80k 107837.87k 108380.84k 108462.08k 108549.46k 108554.92k
SM4-ECB 111924.58k 118173.76k 119776.00k 120093.70k 120264.02k 120274.94k
SM4-CBC 106428.09k 109190.98k 109674.33k 109774.51k 109827.41k 109827.41k

After (7.4x - 36.6x faster):
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes 16384 bytes
SM4-CTR 781979.02k 2432994.28k 3437753.86k 3834177.88k 3963715.58k 3974556.33k
SM4-ECB 937590.69k 2941689.02k 3945751.81k 4328655.87k 4459181.40k 4468692.31k
SM4-CBC 890639.88k 1027746.58k 1050621.78k 1056696.66k 1058613.93k 1058701.31k

Signed-off-by: Daniel Hu <Daniel.Hu@arm.com>

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17455)

show more ...

Update copyright year

Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14801)

Add ossl_ symbols for sm3 and sm4

Partial fix for #12964

Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14473)

Update copyright year

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/13144)

prov: prefix all exposed 'cipher' symbols with ossl_

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13030)

prov: prefix provider internal functions with ossl_

Also convert the names to lower case.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/open

prov: prefix provider internal functions with ossl_

Also convert the names to lower case.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13014)

show more ...

Fix Use after free when copying cipher ctx

Fixes #10438
issue found by clusterfuzz/ossfuzz

The dest was getting a copy of the src structure which contained a pointer that should

Fix Use after free when copying cipher ctx

Fixes #10438
issue found by clusterfuzz/ossfuzz

The dest was getting a copy of the src structure which contained a pointer that should point to an offset inside itself - because of the copy it was pointing to the original structure.

The setup for a ctx is mainly done by the initkey method in the PROV_CIPHER_HW structure. Because of this it makes sense that the structure should also contain a copyctx method that is use to resolve any pointers that need to be setup.

A dup_ctx has been added to the cipher_enc tests in evp_test. It does a dup after setup and then frees the original ctx. This detects any floating pointers in the duplicated context that were pointing back to the freed ctx.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10443)

show more ...

Providers: move all ciphers

From providers/{common,default}/ to providers/implementations/

Except for common code, which remains in providers/common/ciphers/.
However, we do mov

Providers: move all ciphers

From providers/{common,default}/ to providers/implementations/

Except for common code, which remains in providers/common/ciphers/.
However, we do move providers/common/include/internal/ciphers/*.h
to providers/common/include/prov/, and adjust all source including
any of those header files.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10088)

show more ...