Update copyright year

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11616)

Also check for errors in x86_64-xlate.pl.

In https://github.com/openssl/openssl/pull/10883, I'd meant to exclude
the perlasm drivers since they aren't opening pipes and do not
partic

Also check for errors in x86_64-xlate.pl.

In https://github.com/openssl/openssl/pull/10883, I'd meant to exclude
the perlasm drivers since they aren't opening pipes and do not
particularly need it, but I only noticed x86_64-xlate.pl, so
arm-xlate.pl and ppc-xlate.pl got the change.

That seems to have been fine, so be consistent and also apply the change
to x86_64-xlate.pl. Checking for errors is generally a good idea.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/10930)

show more ...

Do not silently truncate files on perlasm errors

If one of the perlasm xlate drivers crashes, OpenSSL's build will
currently swallow the error and silently truncate the output to however

Do not silently truncate files on perlasm errors

If one of the perlasm xlate drivers crashes, OpenSSL's build will
currently swallow the error and silently truncate the output to however
far the driver got. This will hopefully fail to build, but better to
check such things.

Handle this by checking for errors when closing STDOUT (which is a pipe
to the xlate driver).

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10883)

show more ...

Unify all assembler file generators

They now generally conform to the following argument sequence:

script.pl "$(PERLASM_SCHEME)" [ C preprocessor arguments ... ] \

Unify all assembler file generators

They now generally conform to the following argument sequence:

script.pl "$(PERLASM_SCHEME)" [ C preprocessor arguments ... ] \
$(PROCESSOR) <output file>

However, in the spirit of being able to use these scripts manually,
they also allow for no argument, or for only the flavour, or for only
the output file. This is done by only using the last argument as
output file if it's a file (it has an extension), and only using the
first argument as flavour if it isn't a file (it doesn't have an
extension).

While we're at it, we make all $xlate calls the same, i.e. the $output
argument is always quoted, and we always die on error when trying to
start $xlate.

There's a perl lesson in this, regarding operator priority...

This will always succeed, even when it fails:

open FOO, "something" || die "ERR: $!";

The reason is that '||' has higher priority than list operators (a
function is essentially a list operator and gobbles up everything
following it that isn't lower priority), and since a non-empty string
is always true, so that ends up being exactly the same as:

open FOO, "something";

This, however, will fail if "something" can't be opened:

open FOO, "something" or die "ERR: $!";

The reason is that 'or' has lower priority that list operators,
i.e. it's performed after the 'open' call.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9884)

show more ...

Following the license change, modify the boilerplates in crypto/sha/

[skip ci]

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/

Following the license change, modify the boilerplates in crypto/sha/

[skip ci]

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7816)

show more ...

Update copyright year

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5689)

MIPS assembly pack: default heuristic detection to little-endian.

Current endianness detection is somewhat opportunistic and can fail
in cross-compile scenario. Since we are more likely

MIPS assembly pack: default heuristic detection to little-endian.

Current endianness detection is somewhat opportunistic and can fail
in cross-compile scenario. Since we are more likely to cross-compile
for little-endian now, adjust the default accordingly.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5613)

show more ...

Remove email addresses from source code.

Names were not removed.
Some comments were updated.
Replace Andy's address with openssl.org

Reviewed-by: Andy Polyakov <appro@openss

Remove email addresses from source code.

Names were not removed.
Some comments were updated.
Replace Andy's address with openssl.org

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4516)

show more ...

Clean up references to FIPS

This removes the fips configure option. This option is broken as the
required FIPS code is not available.

FIPS_mode() and FIPS_mode_set() are retaine

Clean up references to FIPS

This removes the fips configure option. This option is broken as the
required FIPS code is not available.

FIPS_mode() and FIPS_mode_set() are retained for compatibility, but
FIPS_mode() always returns 0, and FIPS_mode_set() can only be used to
turn FIPS mode off.

Reviewed-by: Stephen Henson <steve@openssl.org>

show more ...

MIPS assembly pack: adapt it for MIPS[32|64]R6.

MIPS[32|64]R6 is binary and source incompatible with previous MIPS ISA
specifications. Fortunately it's still possible to resolve differen

MIPS assembly pack: adapt it for MIPS[32|64]R6.

MIPS[32|64]R6 is binary and source incompatible with previous MIPS ISA
specifications. Fortunately it's still possible to resolve differences
in source code with standard pre-processor and switching to trap-free
version of addition and subtraction instructions.

Reviewed-by: Richard Levitte <levitte@openssl.org>

show more ...

Add OpenSSL copyright to .pl files

Reviewed-by: Richard Levitte <levitte@openssl.org>

MIPS assembly pack: fix MIPS64 assembler warnings.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix some assembler generating scripts for better unification

Some of these scripts would recognise an output parameter if it looks
like a file path. That works both in both the classic

Fix some assembler generating scripts for better unification

Some of these scripts would recognise an output parameter if it looks
like a file path. That works both in both the classic and new build
schemes. Some fo these scripts would only recognise it if it's a
basename (i.e. no directory component). Those need to be corrected,
as the output parameter in the new build scheme is more likely to
contain a directory component than not.

Reviewed-by: Andy Polyakov <appro@openssl.org>

show more ...

GH601: Various spelling fixes.

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Fix irix-cc build.

Reviewed-by: Matt Caswell <matt@openssl.org>

MIPS assembly pack: add support for SmartMIPS ASE.

MIPS assembly pack: add MIPS[32|64]R2 code.

MIPS assembly pack: assign default value to $flavour.

sha1-mips.pl: fix typo.

vxworks-mips: unify and add assembler.

crypto/sha/asm/sha[1|512]-mips.pl: minor updates.

sha1-mips.pl, mips-mont.pl: unify MIPS assembler modules in respect to
ABI and binutils.

SHA1 assembler show off: minor performance updates and new modules for
forgotten CPUs.