request: make Curl_req_init return void

Since it could not return error and therefore this change removes dead
code for the caller.

Spotted by CodeSonar.

Closes #13423

http: separate response parsing from response action

- move code that triggers on end-of-response into separate function from
parsing
- simplify some headp/headerlen usage
- ad

http: separate response parsing from response action

- move code that triggers on end-of-response into separate function from
parsing
- simplify some headp/headerlen usage
- add `httpversion` to SingleRequest to indicate the version of the
current response

Closes #13134

show more ...

http: expect 100 rework

Move all handling of HTTP's `Expect: 100-continue` feature into a client
reader. Add sending flag `KEEP_SEND_TIMED` that triggers transfer
sending on general

http: expect 100 rework

Move all handling of HTTP's `Expect: 100-continue` feature into a client
reader. Add sending flag `KEEP_SEND_TIMED` that triggers transfer
sending on general events like a timer.

HTTP installs a `CURL_CR_PROTOCOL` reader when announcing `Expect:
100-continue`. That reader works as follows:

- on first invocation, records time, starts the `EXPIRE_100_TIMEOUT`
timer, disables `KEEP_SEND`, enables `KEEP_SEND_TIMER` and returns 0,
eos=FALSE like a paused upload.

- on subsequent invocation it checks if the timer has expired. If so, it
enables `KEEP_SEND` and switches to passing through reads to the
underlying readers.

Transfer handling's `readwrite()` will be invoked when a timer expires
(like `EXPIRE_100_TIMEOUT`) or when data from the server arrives. Seeing
`KEEP_SEND_TIMER`, it will try to upload more data, which triggers
reading from the client readers again. Which then may lead to a new
pausing or cause the upload to start.

Flags and timestamps connected to this have been moved from
`SingleRequest` into the reader's context.

Closes #13110

show more ...

lib: move 'done' parameter to SingleRequests

A transfer may do several `SingleRequest`s for its success. This happens
regularly for authentication, follows and retries on failed connecti

lib: move 'done' parameter to SingleRequests

A transfer may do several `SingleRequest`s for its success. This happens
regularly for authentication, follows and retries on failed connections.
The "readwrite()" calls and functions connected to those carried a `bool
*done` parameter to indicate that the current `SingleRequest` is over.
This may happen before `upload_done` or `download_done` bits of
`SingleRequest` are set.

The problem with that is now `write_resp()` protocol handlers are
invoked in places where the `bool *done` cannot be passed up to the
caller. Instead of being a bool in the call chain, it needs to become a
member of `SingleRequest`, reflecting its state.

This removes the `bool *done` parameter and adds the `done` bit to
`SingleRequest` instead. It adds `Curl_req_soft_reset()` for using a
`SingleRequest` in a follow up, clearing `done` and other
flags/counters.

Closes #13096

show more ...

mime: add client reader

Add `mime` client reader. Encapsulates reading from mime parts, getting
their length, rewinding and unpausing.

- remove special mime handling from sendf.

mime: add client reader

Add `mime` client reader. Encapsulates reading from mime parts, getting
their length, rewinding and unpausing.

- remove special mime handling from sendf.c and easy.c
- add general "unpause" method to client readers
- use new reader in http/imap/smtp
- make some mime functions static that are now only used internally

In addition:
- remove flag 'forbidchunk' as no longer needed

Closes #13039

show more ...

lib: enhance client reader resume + rewind

- update client reader documentation
- client reader, add rewind capabilities
- tell creader to rewind on next start
- Curl_cli

lib: enhance client reader resume + rewind

- update client reader documentation
- client reader, add rewind capabilities
- tell creader to rewind on next start
- Curl_client_reset() will keep reader for future rewind if requested
- add Curl_client_cleanup() for freeing all resources independent of
rewinds
- add Curl_client_start() to trigger rewinds
- move rewind code from multi.c to sendf.c and make part of
"cr-in"'s implementation
- http, move the "resume_from" handling into the client readers
- the setup of a HTTP request is reshuffled to follow:
* determine method, target, auth negotiation
* install the client reader(s) for the request, including crlf
conversions and "chunked" encoding
* apply ranges to client reader
* concat request headers, upgrades, cookies, etc.
* complete request by determining Content-Length of installed
readers in combination with method
* send
- add methods for client readers to
* return the overall length they will generate (or -1 when unknown)
* return the amount of data on the CLIENT level, so that
expect-100 can decide if it want to apply itself
* set a "resume_from" offset or fail if unsupported
- struct HTTP has become largely empty now
- rename `Client_reader_*` to `Curl_creader_*`

Closes #13026

show more ...

lib: further send/upload handling polish

- Move all the "upload_done" handling to request.c

- add possibility to abort sending of a request
- add `Curl_req_done_sending()` f

lib: further send/upload handling polish

- Move all the "upload_done" handling to request.c

- add possibility to abort sending of a request
- add `Curl_req_done_sending()` for checks
- transfer.c: readwrite_upload() now clean

- removing data->state.ulbuf and data->req.upload_fromhere

- as well as data->req.upload_present
- set data->req.upload_done on having read all from
the client and completely flushed the send buffer

- tftp, remove setting of data->req.upload_fromhere

- serves no purpose as `upload_present` is not set
and the data itself is directly `sendto()` anyway

- smtp, make upload EOB conversion a client reader
- xfer_ulbuf addition

- add xfer_ulbuf for borrowing, similar to xfer_buf
- use in file upload
- use in c-hyper body sending

- h1-proxy, remove init of data->state.uilbuf that is never used
- smb, add own send_buf instead of using data->state.ulbuf

Closes #13010

show more ...

lib: Curl_read/Curl_write clarifications

- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to
clarify when and at what level they operate
- send/recv of transfer related

lib: Curl_read/Curl_write clarifications

- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to
clarify when and at what level they operate
- send/recv of transfer related data is now done via
`Curl_xfer_send()/Curl_xfer_recv()` which no longer has
socket/socketindex as parameter. It decides on the transfer
setup of `conn->sockfd` and `conn->writesockfd` on which
connection filter chain to operate.
- send/recv on a specific connection filter chain is done via
`Curl_conn_send()/Curl_conn_recv()` which get the socket index
as parameter.
- rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for
naming consistency
- clarify that the special CURLE_AGAIN hangling to return
`CURLE_OK` with length 0 only applies to `Curl_xfer_send()`
and CURLE_AGAIN is returned by all other send() variants.
- fix a bug in websocket `curl_ws_recv()` that mixed up data
when it arrived in more than a single chunk (to be made
into a sperate PR, also)

Added as documented [in
CLIENT-READER.md](https://github.com/curl/curl/blob/5b1f31dfbab8aef467c419c68aa06dc738cb75d4/docs/CLIENT-READERS.md).

- old `Curl_buffer_send()` completely replaced by new `Curl_req_send()`
- old `Curl_fillreadbuffer()` replaced with `Curl_client_read()`
- HTTP chunked uploads are now formatted in a client reader added when
needed.
- FTP line-end conversions are done in a client reader added when
needed.
- when sending requests headers, remaining buffer space is filled with
body data for sending in "one go". This is independent of the request
body size. Resolves #12938 as now small and large requests have the
same code path.

Changes done to test cases:

- test513: now fails before sending request headers as this initial
"client read" triggers the setup fault. Behaves now the same as in
hyper build
- test547, test555, test1620: fix the length check in the lib code to
only fail for reads *smaller* than expected. This was a bug in the
test code that never triggered in the old implementation.

Closes #12969

show more ...

lib: Curl_read/Curl_write clarifications

- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to
clarify when and at what level they operate
- send/recv of transfer related

lib: Curl_read/Curl_write clarifications

- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to
clarify when and at what level they operate
- send/recv of transfer related data is now done via
`Curl_xfer_send()/Curl_xfer_recv()` which no longer has
socket/socketindex as parameter. It decides on the transfer
setup of `conn->sockfd` and `conn->writesockfd` on which
connection filter chain to operate.
- send/recv on a specific connection filter chain is done via
`Curl_conn_send()/Curl_conn_recv()` which get the socket index
as parameter.
- rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for
naming consistency
- clarify that the special CURLE_AGAIN hangling to return
`CURLE_OK` with length 0 only applies to `Curl_xfer_send()`
and CURLE_AGAIN is returned by all other send() variants.
- fix a bug in websocket `curl_ws_recv()` that mixed up data
when it arrived in more than a single chunk

The method for sending not just raw bytes, but bytes that are either
"headers" or "body". The send abstraction stack, to to bottom, now is:

* `Curl_req_send()`: has parameter to indicate amount of header bytes,
buffers all data.
* `Curl_xfer_send()`: knows on which socket index to send, returns
amount of bytes sent.
* `Curl_conn_send()`: called with socket index, returns amount of bytes
sent.

In addition there is `Curl_req_flush()` for writing out all buffered
bytes.

`Curl_req_send()` is active for requests without body,
`Curl_buffer_send()` still being used for others. This is because the
special quirks need to be addressed in future parts:

* `expect-100` handling
* `Curl_fillreadbuffer()` needs to add directly to the new
`data->req.sendbuf`
* special body handlings, like `chunked` encodings and line end
conversions will be moved into something like a Client Reader.

In functions of the pattern `CURLcode xxx_send(..., ssize_t *written)`,
replace the `ssize_t` with a `size_t`. It makes no sense to allow for negative
values as the returned `CURLcode` already specifies error conditions. This
allows easier handling of lengths without casting.

Closes #12964

show more ...

lib: send rework

Curl_read/Curl_write clarifications

- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to 1clarify
when and at what level they operate

- sen

lib: send rework

Curl_read/Curl_write clarifications

- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to 1clarify
when and at what level they operate

- send/recv of transfer related data is now done via
`Curl_xfer_send()/Curl_xfer_recv()` which no longer has
socket/socketindex as parameter. It decides on the transfer setup of
`conn->sockfd` and `conn->writesockfd` on which connection filter
chain to operate.

- send/recv on a specific connection filter chain is done via
`Curl_conn_send()/Curl_conn_recv()` which get the socket index as
parameter.

- rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for naming
consistency

- clarify that the special CURLE_AGAIN handling to return `CURLE_OK`
with length 0 only applies to `Curl_xfer_send()` and CURLE_AGAIN is
returned by all other send() variants.

SingleRequest reshuffling

- move functions into request.[ch]
- differentiate between reset and free
- add Curl_req_done() to perform last actions
- add a send `bufq` to SingleRequest for future use in keeping upload data

Closes #12963

show more ...