Deprecate passing a negative width to mb_strimwidth()

mb_strimwidth inserts error markers in invalid input string (for backwards compatibility)

The old implementation did this. It also did the same to the
trim marker, if the trim marker was

mb_strimwidth inserts error markers in invalid input string (for backwards compatibility)

The old implementation did this. It also did the same to the
trim marker, if the trim marker was invalid in the specified
encoding, but I have not imitated that behavior (for performance).

show more ...

New implementation of mb_strimwidth

This new implementation of mb_strimwidth uses the new text
encoding conversion filters. Changes from the previous
implementation:

• mb_st

New implementation of mb_strimwidth

This new implementation of mb_strimwidth uses the new text
encoding conversion filters. Changes from the previous
implementation:

• mb_strimwidth allows a negative 'from' argument, which
should count backwards from the end of the string. However,
the implementation of this feature was buggy (starting right
from when it was first implemented).

It used the following code:

if ((from < 0) || (width < 0)) {
swidth = mbfl_strwidth(&string);
}
if (from < 0) {
from += swidth;
}

Do you see the bug? 'from' is a count of CODEPOINTS, but
'swidth' is a count of TERMINAL COLUMNS. Adding those two
together does not make sense. If there were no fullwidth
characters in the input string, then the two counts coincide
and the feature would work correctly. However, each
fullwidth character would throw the result off by one,
causing more characters to be skipped than was requested.

• mb_strimwidth also allows a negative 'width' argument,
which again counts backwards from the end of the string;
in this case, it is not determining the START of the portion
which we want to extract, but rather, the END of that portion.
Perhaps unsurprisingly, this feature was also buggy.

Code:

if (width < 0) {
width = swidth + width - from;
}

'swidth + width' is fine here; the problem is '- from'.
Again, that is subtracting a count of CODEPOINTS from a
count of TERMINAL COLUMNS. In this case, we really need
to count the terminal width of the string prefix skipped
over by 'from', and subtract that rather than the number
of codepoints which are being skipped.

As a result, if a 'from' count was passed along with a
negative 'width', for every fullwidth character in the
skipped prefix, the result of mb_strimwidth was one
terminal column wider than requested.

Since these situations were covered by unit tests, you
might wonder why the bugs were not caught. Well, as far as
I can see, it looks like the author of the 'tests' just
captured the actual output of mb_strimwidth and defined it
as 'correct'. The tests were written in such a way that it
was difficult to examine them and see whether they made
sense or not; but a careful examination of the inputs and
outputs clearly shows that the legacy tests did not conform
to the documented contract of mb_strimwidth.

• The old implementation would always pass the input string
through decoding/encoding filters before returning it to
the caller, even if it fit within the specified width. This
means that invalid byte sequences would be converted to
error markers. For performance, the new implementation
returns the very same string which was passed in if it
does not exceed the specified width. This means that
erroneous byte sequences are not converted to error markers
unless it is necessary to trim the string.

• The same applies to the 'trim marker' string.

• The old implementation was buggy in the (unusual)
case that the trim marker is wider than the requested
maximum width of the result. It did an unsigned subtraction
of the requested width and the width of the trim marker. If the
width of the trim marker was greater, that subtraction would
underflow and yield a huge number. As a result, mb_strimwidth
would then pass the input string through, even if it was
far wider than the requested maximum width.

In that case, since the input string is wider than the
requested width, and NONE of it will fit together with the
trim marker, the new implementation returns just the trim
marker. This is the one case where the output can be wider
than the requested width: when BOTH the input string and
also the trim marker are too wide.

• Since it passed the input string and trim marker through
decoding/encoding filters, when using "Quoted-Printable" as
the encoding, newlines could be inserted into the trim marker
to maintain the maximum line length for QP.

This is an extremely bizarre use case and I don't think there
is any point in worrying about it. QP will be removed from
mbstring in time, anyways.

PERFORMANCE:

• From micro-benchmarking with various input string lengths and
text encodings, it appears that the new implementation is 2-3x
faster for UTF-8 and UTF-16. For legacy Japanese text encodings
like ISO-2022-JP or SJIS, the new implementation is perhaps 25%
faster.

• Note that correctly implementing negative 'from' and 'width'
arguments imposes a small performance burden in such cases; one
which the old implementation did not pay. This slightly skews
benchmarking results in favor of the old implementation. However,
even so, the new implementation is faster in all cases which I
tested.

show more ...

Migrate more SKIPIF -> EXTENSIONS (#7139)

This is a mix of more automated and manual migration. It should remove all applicable extension_loaded() checks outside of skipif.inc files.

Promote some warnings to ValueError in mbstring

Promoted warnings are:
* Empty encoding lists
* Unknown language
* Start and Width out of bound

Remove custom error handler in mbstring tests

To make it more obvious what is tested and what the error messages
are.

Sync leading and final newlines in *.phpt sections

This patch adds missing newlines, trims multiple redundant final
newlines into a single one, and trims redundant leading newlines in al

Sync leading and final newlines in *.phpt sections

This patch adds missing newlines, trims multiple redundant final
newlines into a single one, and trims redundant leading newlines in all
*.phpt sections.

According to POSIX, a line is a sequence of zero or more non-' <newline>'
characters plus a terminating '<newline>' character. [1] Files should
normally have at least one final newline character.

C89 [2] and later standards [3] mention a final newline:
"A source file that is not empty shall end in a new-line character,
which shall not be immediately preceded by a backslash character."

Although it is not mandatory for all files to have a final newline
fixed, a more consistent and homogeneous approach brings less of commit
differences issues and a better development experience in certain text
editors and IDEs.

[1] http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap03.html#tag_03_206
[2] https://port70.net/~nsz/c/c89/c89-draft.html#2.1.1.2
[3] https://port70.net/~nsz/c/c99/n1256.html#5.1.1.2

show more ...

Sync leading and final newlines in *.phpt sections

This patch adds missing newlines, trims multiple redundant final
newlines into a single one, and trims redundant leading newlines in al

Sync leading and final newlines in *.phpt sections

This patch adds missing newlines, trims multiple redundant final
newlines into a single one, and trims redundant leading newlines in all
*.phpt sections.

According to POSIX, a line is a sequence of zero or more non-' <newline>'
characters plus a terminating '<newline>' character. [1] Files should
normally have at least one final newline character.

C89 [2] and later standards [3] mention a final newline:
"A source file that is not empty shall end in a new-line character,
which shall not be immediately preceded by a backslash character."

Although it is not mandatory for all files to have a final newline
fixed, a more consistent and homogeneous approach brings less of commit
differences issues and a better development experience in certain text
editors and IDEs.

[1] http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap03.html#tag_03_206
[2] https://port70.net/~nsz/c/c89/c89-draft.html#2.1.1.2
[3] https://port70.net/~nsz/c/c99/n1256.html#5.1.1.2

show more ...

Sync leading and final newlines in *.phpt sections

This patch adds missing newlines, trims multiple redundant final
newlines into a single one, and trims redundant leading newlines in al

Sync leading and final newlines in *.phpt sections

This patch adds missing newlines, trims multiple redundant final
newlines into a single one, and trims redundant leading newlines in all
*.phpt sections.

According to POSIX, a line is a sequence of zero or more non-' <newline>'
characters plus a terminating '<newline>' character. [1] Files should
normally have at least one final newline character.

C89 [2] and later standards [3] mention a final newline:
"A source file that is not empty shall end in a new-line character,
which shall not be immediately preceded by a backslash character."

Although it is not mandatory for all files to have a final newline
fixed, a more consistent and homogeneous approach brings less of commit
differences issues and a better development experience in certain text
editors and IDEs.

[1] http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap03.html#tag_03_206
[2] https://port70.net/~nsz/c/c89/c89-draft.html#2.1.1.2
[3] https://port70.net/~nsz/c/c99/n1256.html#5.1.1.2

show more ...

Sync leading and final newlines in *.phpt sections

This patch adds missing newlines, trims multiple redundant final
newlines into a single one, and trims redundant leading newlines in al

Sync leading and final newlines in *.phpt sections

This patch adds missing newlines, trims multiple redundant final
newlines into a single one, and trims redundant leading newlines in all
*.phpt sections.

According to POSIX, a line is a sequence of zero or more non-' <newline>'
characters plus a terminating '<newline>' character. [1] Files should
normally have at least one final newline character.

C89 [2] and later standards [3] mention a final newline:
"A source file that is not empty shall end in a new-line character,
which shall not be immediately preceded by a backslash character."

Although it is not mandatory for all files to have a final newline
fixed, a more consistent and homogeneous approach brings less of commit
differences issues and a better development experience in certain text
editors and IDEs.

[1] http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap03.html#tag_03_206
[2] https://port70.net/~nsz/c/c89/c89-draft.html#2.1.1.2
[3] https://port70.net/~nsz/c/c99/n1256.html#5.1.1.2

show more ...

mb_strimwidth(): Add support for negative 'start' and 'width'

- Fix include_path.

Disabled output_handler in INI section

Clean up.

Renamed the test cases.