Run tidy

This should fix most of the remaining issues with tabs and spaces
being mixed in tests.

Reindent phpt files

Clean DONE tags from tests

Remove most of the `===DONE===` tags and its variations.
Keep `===DONE===` if the test output otherwise becomes empty.

Closes GH-4872.

Replace dirname(__FILE__) by __DIR__ in tests

Sync leading and final newlines in *.phpt sections

This patch adds missing newlines, trims multiple redundant final
newlines into a single one, and trims redundant leading newlines in al

Sync leading and final newlines in *.phpt sections

This patch adds missing newlines, trims multiple redundant final
newlines into a single one, and trims redundant leading newlines in all
*.phpt sections.

According to POSIX, a line is a sequence of zero or more non-' <newline>'
characters plus a terminating '<newline>' character. [1] Files should
normally have at least one final newline character.

C89 [2] and later standards [3] mention a final newline:
"A source file that is not empty shall end in a new-line character,
which shall not be immediately preceded by a backslash character."

Although it is not mandatory for all files to have a final newline
fixed, a more consistent and homogeneous approach brings less of commit
differences issues and a better development experience in certain text
editors and IDEs.

[1] http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap03.html#tag_03_206
[2] https://port70.net/~nsz/c/c89/c89-draft.html#2.1.1.2
[3] https://port70.net/~nsz/c/c99/n1256.html#5.1.1.2

show more ...

Sync leading and final newlines in *.phpt sections

This patch adds missing newlines, trims multiple redundant final
newlines into a single one, and trims redundant leading newlines in al

Sync leading and final newlines in *.phpt sections

This patch adds missing newlines, trims multiple redundant final
newlines into a single one, and trims redundant leading newlines in all
*.phpt sections.

According to POSIX, a line is a sequence of zero or more non-' <newline>'
characters plus a terminating '<newline>' character. [1] Files should
normally have at least one final newline character.

C89 [2] and later standards [3] mention a final newline:
"A source file that is not empty shall end in a new-line character,
which shall not be immediately preceded by a backslash character."

Although it is not mandatory for all files to have a final newline
fixed, a more consistent and homogeneous approach brings less of commit
differences issues and a better development experience in certain text
editors and IDEs.

[1] http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap03.html#tag_03_206
[2] https://port70.net/~nsz/c/c89/c89-draft.html#2.1.1.2
[3] https://port70.net/~nsz/c/c99/n1256.html#5.1.1.2

show more ...

Sync leading and final newlines in *.phpt sections

This patch adds missing newlines, trims multiple redundant final
newlines into a single one, and trims redundant leading newlines in al

Sync leading and final newlines in *.phpt sections

This patch adds missing newlines, trims multiple redundant final
newlines into a single one, and trims redundant leading newlines in all
*.phpt sections.

According to POSIX, a line is a sequence of zero or more non-' <newline>'
characters plus a terminating '<newline>' character. [1] Files should
normally have at least one final newline character.

C89 [2] and later standards [3] mention a final newline:
"A source file that is not empty shall end in a new-line character,
which shall not be immediately preceded by a backslash character."

Although it is not mandatory for all files to have a final newline
fixed, a more consistent and homogeneous approach brings less of commit
differences issues and a better development experience in certain text
editors and IDEs.

[1] http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap03.html#tag_03_206
[2] https://port70.net/~nsz/c/c89/c89-draft.html#2.1.1.2
[3] https://port70.net/~nsz/c/c99/n1256.html#5.1.1.2

show more ...

Sync leading and final newlines in *.phpt sections

This patch adds missing newlines, trims multiple redundant final
newlines into a single one, and trims redundant leading newlines in al

Sync leading and final newlines in *.phpt sections

This patch adds missing newlines, trims multiple redundant final
newlines into a single one, and trims redundant leading newlines in all
*.phpt sections.

According to POSIX, a line is a sequence of zero or more non-' <newline>'
characters plus a terminating '<newline>' character. [1] Files should
normally have at least one final newline character.

C89 [2] and later standards [3] mention a final newline:
"A source file that is not empty shall end in a new-line character,
which shall not be immediately preceded by a backslash character."

Although it is not mandatory for all files to have a final newline
fixed, a more consistent and homogeneous approach brings less of commit
differences issues and a better development experience in certain text
editors and IDEs.

[1] http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap03.html#tag_03_206
[2] https://port70.net/~nsz/c/c89/c89-draft.html#2.1.1.2
[3] https://port70.net/~nsz/c/c99/n1256.html#5.1.1.2

show more ...

better test cleanup

and even force the XFAIL to fail as it would take too long anyway, even if it passes

Fixed bug #51800 proc_open on Windows hangs forever

This loop can block for some minutes, theoretically. Practially
however, this is a 99% non issue for a normal use case. This is
re

Fixed bug #51800 proc_open on Windows hangs forever

This loop can block for some minutes, theoretically. Practially
however, this is a 99% non issue for a normal use case. This is
required because read() is synchronous. The PHP streams API wants
to fill its internal buffers, therefore it might try to read some
more data than user has demanded. Also, for a case where we want
to read X bytes, but neither enough data nor EOF arrives, read()
will block until it could fill the buffer. If a counterpart station
runs slowly or delivers not all the data at once, read() would
still be waiting. If we quit too early, we possibly could loose
some data from the pipe. Thus it has to emulate the read()
behaviour, but obviously not completely, just to some grade.

Reading big data amount is for sure an issue on any platforms, it
depends on the pipe buffer size, which is controlled by the system.
On Windows, the buffer size seems to be way too small, which causes
buffer congestion and a dead lock. It is essential to read the pipe
descriptors simultaneously and possibly in the same order as the
opposite writes them.

Thus, this will work with smaller buffer data sizes passed through
pipes. As MSDN states, anonymous pipes don't support asynchronous
operations. Neither anonymous pipes do support select() as they are
not SOCKETs but file descriptors. Consequently - bigger data sizes
will need a better solution based on threads. However it is much
more expencive. Maybe a better solution could be exporting a part
of the internal doing as a userspace function which could perform
some kind of lookahead operation on the pipe descriptor.

This is just the first stone, depending on the user feedback we
might go for further improvements in this area.

show more ...