Restore backwards-compatible mappings of 0x5C and 0x7E in SJIS

According to the relevant Japan Industrial Standards Committee standards,
SJIS 0x5C is a Yen sign, and 0x7E is an overline.

Restore backwards-compatible mappings of 0x5C and 0x7E in SJIS

According to the relevant Japan Industrial Standards Committee standards,
SJIS 0x5C is a Yen sign, and 0x7E is an overline.

However, this conflicts with the implementation of SJIS in various legacy
software (notably Microsoft products), where SJIS 0x5C and 0x7E are taken
as equivalent to the same ASCII bytes.

Prior to PHP 8.1, mbstring's implementation of SJIS handled these bytes
compatibly with Microsoft products. This was changed in PHP 8.1.0, in an
attempt to comply with the JISC specifications. However, after discussion
with various concerned Japanese developers, it seems that the historical
behavior was more useful in the majority of applications which process
SJIS-encoded text.

Since we are now treating SJIS 0x5C as equivalent to U+005C and 0x7E as
equivalent to U+007E, it does not make sense to convert U+203E (OVERLINE)
to 0x7E, nor does it make sense to convert U+00A5 (YEN SIGN) to 0x5C. Restore
the mappings for those codepoints from before PHP 8.1.0.

Fixes GH-8281.

show more ...

mbstring no longer provides 'long' substitutions for erroneous input bytes

Previously, mbstring had a special mode whereby it would convert
erroneous input byte sequences to output like

mbstring no longer provides 'long' substitutions for erroneous input bytes

Previously, mbstring had a special mode whereby it would convert
erroneous input byte sequences to output like "BAD+XXXX", where "XXXX"
would be the erroneous bytes expressed in hexadecimal. This mode could
be enabled by calling `mb_substitute_character("long")`.

However, accurately reproducing input byte sequences from the cached
state of a conversion filter is often tricky, and this significantly
complicates the implementation. Further, the means used for passing
the erroneous bytes through to where the "BAD+XXXX" text is generated
only allows for up to 3 bytes to be passed, meaning that some erroneous
byte sequences are truncated anyways.

More to the point, a search of publically available PHP code indicates
that nobody is really using this feature anyways.

Incidentally, this feature also provided error output like "JIS+XXXX"
if the input 'should have' represented a JISX 0208 codepoint, but it
decodes to a codepoint which does not exist in the JISX 0208 charset.
Similarly, specific error output was provided for non-existent
JISX 0212 codepoints, and likewise for JISX 0213, CP932, and a few
other charsets. All of that is now consigned to the flames.

However, "long" error markers also include a somewhat more useful
"U+XXXX" marker for Unicode codepoints which were successfully
decoded from the input text, but cannot be represented in the output
encoding. Those are still supported.

With this change, there is no need to use a variety of special values
in the high bits of a wchar to represent different types of error
values. We can (and will) just use a single error value. This will be
equal to -1.

One complicating factor: Text conversion functions return an integer to
indicate whether the conversion operation should be immediately
aborted, and the magic 'abort' marker is -1. Also, almost all of these
functions would return the received byte/codepoint to indicate success.
That doesn't work with the new error value; if an input filter detects
an error and passes -1 to the output filter, and the output filter
returns it back, that would be taken to mean 'abort'.

Therefore, amend all these functions to return 0 for success.

show more ...

Add more tests for SJIS text conversion

Test behavior of 'long' illegal character markers

After mb_substitute_character("long"), mbstring will respond to
erroneous input by inserting 'long' error markers into the output.
D

Test behavior of 'long' illegal character markers

After mb_substitute_character("long"), mbstring will respond to
erroneous input by inserting 'long' error markers into the output.
Depending on the situation, these error markers will either look like
BAD+XXXX (for general bad input), U+XXXX (when the input is OK, but it
converts to Unicode codepoints which cannot be represented in the
output encoding), or an encoding-specific marker like JISX+XXXX or
W932+XXXX.

We have almost no tests for this feature. Add a bunch of tests to
ensure that all our legacy encoding handlers work in a reasonable
way when 'long' error markers are enabled.

show more ...

Migrate more SKIPIF -> EXTENSIONS (#7139)

This is a mix of more automated and manual migration. It should remove all applicable extension_loaded() checks outside of skipif.inc files.

Convert U+00AF (MACRON) to 0x8150 (FULLWIDTH MACRON) in some SJIS variants

Except for vanilla Shift-JIS, where 0x7E is a halfwidth overline/macron.
As for Shift-JIS-2004, it has an added

Convert U+00AF (MACRON) to 0x8150 (FULLWIDTH MACRON) in some SJIS variants

Except for vanilla Shift-JIS, where 0x7E is a halfwidth overline/macron.
As for Shift-JIS-2004, it has an added character (byte sequence 0x854A)
which was defined as a halfwidth macron in JIS X 0213:2000, so we use that.

show more ...

0x7E is not a tilde in Shift-JIS{,-2004}

Test EUC-JP and Shift-JIS more thoroughly

Previously, the unit tests for these text encodings covered all mappings
from legacy -> Unicode, and all _reversible_ mappings from Unicode -> l

Test EUC-JP and Shift-JIS more thoroughly

Previously, the unit tests for these text encodings covered all mappings
from legacy -> Unicode, and all _reversible_ mappings from Unicode -> legacy.
However, we should also test the few Unicode -> legacy mappings which
are not reversible.

show more ...

Fix mbstring support for Shift-JIS

- Reject otherwise valid kuten codes which don't map to anything in JIS X 0208.
- Handle truncated multi-byte characters as an error.
- Convert Shi

Fix mbstring support for Shift-JIS

- Reject otherwise valid kuten codes which don't map to anything in JIS X 0208.
- Handle truncated multi-byte characters as an error.
- Convert Shift-JIS 0x7E to Unicode 0x203E (overline) as recommended by the
Unicode Consortium, and as iconv does.
- Convert Shift-JIS 0x5C to Unicode 0xA5 (yen sign) as recommended by the
Unicode Consortium, and as iconv does.
(NOTE: This will affect PHP scripts which use an internal encoding of
Shift-JIS! PHP assigns a special meaning to 0x5C, the backslash. For example,
it is used for escapes in double-quoted strings. Mapping the Shift-JIS yen
sign to the Unicode yen sign means the yen sign will not be usable for
C escapes in double-quoted strings. Japanese PHP programmers who want to
write their source code in Shift-JIS for some strange reason will have to
use the JIS X 0208 backlash or 'REVERSE SOLIDUS' character for their C
escapes.)
- Convert Unicode 0x5C (backslash) to Shift-JIS 0x815F (reverse solidus).
- Immediately handle error if first Shift-JIS byte is over 0xEF, rather than
waiting to see the next byte. (Previously, the value used was 0xFC, which is
the limit for the 2nd byte and not the 1st byte of a multi-byte character.)
- Don't allow 'control characters' to appear in the middle of a multi-byte
character.

The test case for bug 47399 is now obsolete. That test assumed that a number
of Shift-JIS byte sequences which don't map to any character were 'valid'
(because the byte values were within the legal ranges).

show more ...