Add fast mb_strcut implementation for UTF-8

The old implementation runs through the entire string to pick out the
part which should be returned by mb_strcut. This creates significant

Add fast mb_strcut implementation for UTF-8

The old implementation runs through the entire string to pick out the
part which should be returned by mb_strcut. This creates significant
performance overhead. The new specialized implementation of mb_strcut
for UTF-8 usually only examines a few bytes around the starting and
ending cut points, meaning it generally runs in constant time.

For UTF-8 strings just a few bytes long, the new implementation is
around 10% faster (according to microbenchmarks which I ran locally).
For strings around 10,000 bytes in length, it is 50-300x faster.
(Yes, that is 300x and not 300%.)

The new implementation behaves identically to the old one on VALID
UTF-8 strings; a fuzzer was used to help ensure this is the case.
On invalid UTF-8 strings, there is a difference: in some cases, the
old implementation will pass invalid byte sequences through unchanged,
while in others it will remove them. The new implementation has
behavior which is perhaps slightly more predictable: it simply backs
up the starting and ending cut points to the preceding "starter
byte" (one which is not a UTF-8 continuation byte).

show more ...

[skip ci] Fix various typos and grammar issues (#11143)

Fix phpGH-10648: add check function pointer into mbfl_encoding

Previously, mbstring used the same logic for encoding validation as for
encoding conversion.

However, there are ca

Fix phpGH-10648: add check function pointer into mbfl_encoding

Previously, mbstring used the same logic for encoding validation as for
encoding conversion.

However, there are cases where we want to use different logic for validation
and conversion. For example, if a string ends up with missing input
required by the encoding, or if a character is input that is invalid
as an encoding but can be converted, the conversion should succeed and
the validation should fail.

To achieve this, a function pointer mb_check_fn has been added to
struct mbfl_encoding to implement the logic used for validation.
Also, added implementation of validation logic for UTF-7, UTF7-IMAP,
ISO-2022-JP and JIS.

(The same change has already been made to PHP 8.2 and 8.3; see
6fc8d014df. This commit is backporting the change to PHP 8.1.)

show more ...

Fix phpGH-10648: add check function pointer into mbfl_encoding

Previously, mbstring used the same logic for encoding validation as for
encoding conversion.

However, there are ca

Fix phpGH-10648: add check function pointer into mbfl_encoding

Previously, mbstring used the same logic for encoding validation as for
encoding conversion.

However, there are cases where we want to use different logic for validation
and conversion. For example, if a string ends up with missing input
required by the encoding, or if a character is input that is invalid
as an encoding but can be converted, the conversion should succeed and
the validation should fail.

To achieve this, a function pointer mb_check_fn has been added to
struct mbfl_encoding to implement the logic used for validation.
Also, added implementation of validation logic for UTF-7, UTF7-IMAP,
ISO-2022-JP and JIS.

show more ...

Implement mb_encode_mimeheader using fast text conversion filters

The behavior of the new mb_encode_mimeheader implementation closely
follows the old implementation, except for three poi

Implement mb_encode_mimeheader using fast text conversion filters

The behavior of the new mb_encode_mimeheader implementation closely
follows the old implementation, except for three points:

• The old implementation was missing a call to the mbfl_convert_filter
flush function. So it would sometimes truncate the input string just
before its end.

• The old implementation would drop zero bytes when QPrint-encoding.
So for example, if you tried to QPrint-encode the UTF-32BE string
"\x00\x00\x12\x34", its QPrint-encoding would be "=12=34", which
does not decode to a valid UTF-32BE string. This is now fixed.

• In some rare corner cases, the new implementation will choose to
Base64-encode or QPrint-encode the input string, where the old
implementation would have just added newlines to it. Specifically,
this can happen when there is a non-space ASCII character, followed
by a large number of ASCII spaces, followed by a non-ASCII character.

The new implementation is around 2.5-8x faster than the old one,
depending on the text encoding and transfer encoding used. Performance
gains are greater with Base64 transfer encoding than with QPrint
transfer encoding; this is not because QPrint-encoding bytes is slow,
but because QPrint-encoded output is much bigger than Base64-encoded
output and takes more lines, so we have to go through the process of
finding the right place to break a line many more times.

show more ...

Fix new conversion filter for QPrint (same order of check as legacy code)

Because of checking for maximum line length *before* certain other checks,
the new conversion filter for QPrint

Fix new conversion filter for QPrint (same order of check as legacy code)

Because of checking for maximum line length *before* certain other checks,
the new conversion filter for QPrint could produce different results from
the old one in some cases. This was discovered while fuzzing the new
implementation of mb_decode_numericentity.

show more ...

Fix legacy conversion filter for QPrint

Implement fast text conversion interface for QPrint

New internal interface for fast text conversion in mbstring

When converting text to/from wchars, mbstring makes one function call
for each and every byte or wchar to be converted. Typica

New internal interface for fast text conversion in mbstring

When converting text to/from wchars, mbstring makes one function call
for each and every byte or wchar to be converted. Typically, each of
these conversion functions contains a state machine, and its state has
to be restored and then saved for every single one of these calls.
It doesn't take much to see that this is grossly inefficient.

Instead of converting one byte or wchar on each call, the new
conversion functions will either fill up or drain a whole buffer of
wchars on each call. In benchmarks, this is about 3-10× faster.

Adding the new, faster conversion functions for all supported legacy
text encodings still needs some work. Also, all the code which uses
the old-style conversion functions needs to be converted to use the
new ones. After that, the old code can be dropped. (The mailparse
extension will also have to be fixed up so it will still compile.)

show more ...

mbstring no longer provides 'long' substitutions for erroneous input bytes

Previously, mbstring had a special mode whereby it would convert
erroneous input byte sequences to output like

mbstring no longer provides 'long' substitutions for erroneous input bytes

Previously, mbstring had a special mode whereby it would convert
erroneous input byte sequences to output like "BAD+XXXX", where "XXXX"
would be the erroneous bytes expressed in hexadecimal. This mode could
be enabled by calling `mb_substitute_character("long")`.

However, accurately reproducing input byte sequences from the cached
state of a conversion filter is often tricky, and this significantly
complicates the implementation. Further, the means used for passing
the erroneous bytes through to where the "BAD+XXXX" text is generated
only allows for up to 3 bytes to be passed, meaning that some erroneous
byte sequences are truncated anyways.

More to the point, a search of publically available PHP code indicates
that nobody is really using this feature anyways.

Incidentally, this feature also provided error output like "JIS+XXXX"
if the input 'should have' represented a JISX 0208 codepoint, but it
decodes to a codepoint which does not exist in the JISX 0208 charset.
Similarly, specific error output was provided for non-existent
JISX 0212 codepoints, and likewise for JISX 0213, CP932, and a few
other charsets. All of that is now consigned to the flames.

However, "long" error markers also include a somewhat more useful
"U+XXXX" marker for Unicode codepoints which were successfully
decoded from the input text, but cannot be represented in the output
encoding. Those are still supported.

With this change, there is no need to use a variety of special values
in the high bits of a wchar to represent different types of error
values. We can (and will) just use a single error value. This will be
equal to -1.

One complicating factor: Text conversion functions return an integer to
indicate whether the conversion operation should be immediately
aborted, and the magic 'abort' marker is -1. Also, almost all of these
functions would return the received byte/codepoint to indicate success.
That doesn't work with the new error value; if an input filter detects
an error and passes -1 to the output filter, and the output filter
returns it back, that would be taken to mean 'abort'.

Therefore, amend all these functions to return 0 for success.

show more ...

Refactor mbfl_ident.c, mbfl_encoding.c, mbfl_memory_device.c, mbfl_string.c

- Make everything less gratuitously verbose
- Don't litter the code with lots of unneeded NULL checks (for thi

Refactor mbfl_ident.c, mbfl_encoding.c, mbfl_memory_device.c, mbfl_string.c

- Make everything less gratuitously verbose
- Don't litter the code with lots of unneeded NULL checks (for things which
will never be NULL)
- Don't return success/failure code from functions which can never fail
- For encoding structs, don't use pointers to pointers to pointers for the
list of alias strings. Pointers to pointers (2 levels of indirection)
is what actually makes sense. This gets rid of some extraneous
dereference operations.

show more ...

Remove useless constants MBFL_CHP_{CTL,DIGIT,UALPHA,LALPHA,MSPECIAL}

Remove unneeded function mbfl_filt_conv_common_dtor

This is a default destructor for mbfl_convert_filter structs. The thing is: there
isn't really anything that needs to be done to those

Remove unneeded function mbfl_filt_conv_common_dtor

This is a default destructor for mbfl_convert_filter structs. The thing is: there
isn't really anything that needs to be done to those structs before freeing them.
The default destructor just zeroed out some fields, but there's no reason why
we should actually do that.

show more ...

Comment constants in mbfl_consts.h, remove unused ones

These were unused, and almost certainly will never be used:

- MBFL_ENCTYPE_MWC4BE
- MBFL_ENCTYPE_MWC4LE
- MBFL_ENCTYPE

Comment constants in mbfl_consts.h, remove unused ones

These were unused, and almost certainly will never be used:

- MBFL_ENCTYPE_MWC4BE
- MBFL_ENCTYPE_MWC4LE
- MBFL_ENCTYPE_SHFTCODE
- MBFL_ENCTYPE_ENC_STRM

For the latter two, there were some encodings which were marked with these flags;
but nothing ever _checked_ these particular flags.

show more ...

Remove redundant includes from mbstring (and make sure correct config.h is used)

Very interesting... it turns out that when Valgrind support was enabled,
`#include "config.h"` from withi

Remove redundant includes from mbstring (and make sure correct config.h is used)

Very interesting... it turns out that when Valgrind support was enabled,
`#include "config.h"` from within mbstring was actually including the file "config.h"
from Valgrind, and not the one from mbstring!!

This is because -I/usr/include/valgrind was added to the compiler invocation _before_
-Iext/mbstring/libmbfl.

Make sure we actually include the file which was intended.

show more ...

Fix [-Wmissing-field-initializers] compiler warning in mbstring

Add missing NULL pointer for mbfl_convert_vtbl struct.

Sync leading and final newlines in source code files

This patch adds missing newlines, trims multiple redundant final
newlines into a single one, and trims redundant leading newlines.

Sync leading and final newlines in source code files

This patch adds missing newlines, trims multiple redundant final
newlines into a single one, and trims redundant leading newlines.

According to POSIX, a line is a sequence of zero or more non-' <newline>'
characters plus a terminating '<newline>' character. [1] Files should
normally have at least one final newline character.

C89 [2] and later standards [3] mention a final newline:
"A source file that is not empty shall end in a new-line character,
which shall not be immediately preceded by a backslash character."

Although it is not mandatory for all files to have a final newline
fixed, a more consistent and homogeneous approach brings less of commit
differences issues and a better development experience in certain text
editors and IDEs.

[1] http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap03.html#tag_03_206
[2] https://port70.net/~nsz/c/c89/c89-draft.html#2.1.1.2
[3] https://port70.net/~nsz/c/c99/n1256.html#5.1.1.2

show more ...

Store input and output filters in mbfl encodings

For functions like mb_chr() and mb_ord() just looking up the
input/output filter for the encoding dominates the runtime. This
commit

Store input and output filters in mbfl encodings

For functions like mb_chr() and mb_ord() just looking up the
input/output filter for the encoding dominates the runtime. This
commit stores the input/output filter for an encoding in the
mbfl encoding structure, so it can be looked up directly, rather
than scanning through filter function lists.

show more ...

trailing whitespace removal

* Refactor zend_multibyte facility.
Now mbstring.script_encoding is superseded by zend.script_encoding.

- Update libmbfl (fixes bug #30549 and #31911).
- Update oniguruma to 3.7.0

@mbfilter is changed to bundled version of libmbfl to prevent LGPL licence problem. mbregex is changed to oniguruma.