aarch64: support BTI and pointer authentication in assembly

This change adds optional support for
- Armv8.3-A Pointer Authentication (PAuth) and
- Armv8.5-A Branch Target Identificat

aarch64: support BTI and pointer authentication in assembly

This change adds optional support for
- Armv8.3-A Pointer Authentication (PAuth) and
- Armv8.5-A Branch Target Identification (BTI)
features to the perl scripts.

Both features can be enabled with additional compiler flags.
Unless any of these are enabled explicitly there is no code change at
all.

The extensions are briefly described below. Please read the appropriate
chapters of the Arm Architecture Reference Manual for the complete
specification.

Scope
-----

This change only affects generated assembly code.

Armv8.3-A Pointer Authentication
--------------------------------

Pointer Authentication extension supports the authentication of the
contents of registers before they are used for indirect branching
or load.

PAuth provides a probabilistic method to detect corruption of register
values. PAuth signing instructions generate a Pointer Authentication
Code (PAC) based on the value of a register, a seed and a key.
The generated PAC is inserted into the original value in the register.
A PAuth authentication instruction recomputes the PAC, and if it matches
the PAC in the register, restores its original value. In case of a
mismatch, an architecturally unmapped address is generated instead.

With PAuth, mitigation against ROP (Return-oriented Programming) attacks
can be implemented. This is achieved by signing the contents of the
link-register (LR) before it is pushed to stack. Once LR is popped,
it is authenticated. This way a stack corruption which overwrites the
LR on the stack is detectable.

The PAuth extension adds several new instructions, some of which are not
recognized by older hardware. To support a single codebase for both pre
Armv8.3-A targets and newer ones, only NOP-space instructions are added
by this patch. These instructions are treated as NOPs on hardware
which does not support Armv8.3-A. Furthermore, this patch only considers
cases where LR is saved to the stack and then restored before branching
to its content. There are cases in the code where LR is pushed to stack
but it is not used later. We do not address these cases as they are not
affected by PAuth.

There are two keys available to sign an instruction address: A and B.
PACIASP and PACIBSP only differ in the used keys: A and B, respectively.
The keys are typically managed by the operating system.

To enable generating code for PAuth compile with
-mbranch-protection=<mode>:

- standard or pac-ret: add PACIASP and AUTIASP, also enables BTI
(read below)
- pac-ret+b-key: add PACIBSP and AUTIBSP

Armv8.5-A Branch Target Identification
--------------------------------------

Branch Target Identification features some new instructions which
protect the execution of instructions on guarded pages which are not
intended branch targets.

If Armv8.5-A is supported by the hardware, execution of an instruction
changes the value of PSTATE.BTYPE field. If an indirect branch
lands on a guarded page the target instruction must be one of the
BTI <jc> flavors, or in case of a direct call or jump it can be any
other instruction. If the target instruction is not compatible with the
value of PSTATE.BTYPE a Branch Target Exception is generated.

In short, indirect jumps are compatible with BTI <j> and <jc> while
indirect calls are compatible with BTI <c> and <jc>. Please refer to the
specification for the details.

Armv8.3-A PACIASP and PACIBSP are implicit branch target
identification instructions which are equivalent with BTI c or BTI jc
depending on system register configuration.

BTI is used to mitigate JOP (Jump-oriented Programming) attacks by
limiting the set of instructions which can be jumped to.

BTI requires active linker support to mark the pages with BTI-enabled
code as guarded. For ELF64 files BTI compatibility is recorded in the
.note.gnu.property section. For a shared object or static binary it is
required that all linked units support BTI. This means that even a
single assembly file without the required note section turns-off BTI
for the whole binary or shared object.

The new BTI instructions are treated as NOPs on hardware which does
not support Armv8.5-A or on pages which are not guarded.

To insert this new and optional instruction compile with
-mbranch-protection=standard (also enables PAuth) or +bti.

When targeting a guarded page from a non-guarded page, weaker
compatibility restrictions apply to maintain compatibility between
legacy and new code. For detailed rules please refer to the Arm ARM.

Compiler support
----------------

Compiler support requires understanding '-mbranch-protection=<mode>'
and emitting the appropriate feature macros (__ARM_FEATURE_BTI_DEFAULT
and __ARM_FEATURE_PAC_DEFAULT). The current state is the following:

-------------------------------------------------------
| Compiler | -mbranch-protection | Feature macros |
+----------+---------------------+--------------------+
| clang | 9.0.0 | 11.0.0 |
+----------+---------------------+--------------------+
| gcc | 9 | expected in 10.1+ |
-------------------------------------------------------

Available Platforms
------------------

Arm Fast Model and QEMU support both extensions.

https://developer.arm.com/tools-and-software/simulation-models/fast-models
https://www.qemu.org/

Implementation Notes
--------------------

This change adds BTI landing pads even to assembly functions which are
likely to be directly called only. In these cases, landing pads might
be superfluous depending on what code the linker generates.
Code size and performance impact for these cases would be negligible.

Interaction with C code
-----------------------

Pointer Authentication is a per-frame protection while Branch Target
Identification can be turned on and off only for all code pages of a
whole shared object or static binary. Because of these properties if
C/C++ code is compiled without any of the above features but assembly
files support any of them unconditionally there is no incompatibility
between the two.

Useful Links
------------

To fully understand the details of both PAuth and BTI it is advised to
read the related chapters of the Arm Architecture Reference Manual
(Arm ARM):
https://developer.arm.com/documentation/ddi0487/latest/

Additional materials:

"Providing protection for complex software"
https://developer.arm.com/architectures/learn-the-architecture/providing-protection-for-complex-software

Arm Compiler Reference Guide Version 6.14: -mbranch-protection
https://developer.arm.com/documentation/101754/0614/armclang-Reference/armclang-Command-line-Options/-mbranch-protection?lang=en

Arm C Language Extensions (ACLE)
https://developer.arm.com/docs/101028/latest

Addional Notes
--------------

This patch is a copy of the work done by Tamas Petz in boringssl. It
contains the changes from the following commits:

aarch64: support BTI and pointer authentication in assembly
Change-Id: I4335f92e2ccc8e209c7d68a0a79f1acdf3aeb791
URL: https://boringssl-review.googlesource.com/c/boringssl/+/42084
aarch64: Improve conditional compilation
Change-Id: I14902a64e5f403c2b6a117bc9f5fb1a4f4611ebf
URL: https://boringssl-review.googlesource.com/c/boringssl/+/43524
aarch64: Fix name of gnu property note section
Change-Id: I6c432d1c852129e9c273f6469a8b60e3983671ec
URL: https://boringssl-review.googlesource.com/c/boringssl/+/44024

Change-Id: I2d95ebc5e4aeb5610d3b226f9754ee80cf74a9af

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16674)

show more ...

Fix aarch64 static linking into shared libraries (see issue #10842 and pull request #11464)

This tries to fix the following link errors on aarch64 when using OpenSSL
3.0.0 alpha 6, compi

Fix aarch64 static linking into shared libraries (see issue #10842 and pull request #11464)

This tries to fix the following link errors on aarch64 when using OpenSSL
3.0.0 alpha 6, compiling it with "no-shared" and -fPIC in CFLAGS, then
trying to use the resulting OpenSSL static libraries in the build of
elfutils, which embed libcrypto.a into libdebuginfo.so, which hides all
symbols (except the libdebuginfod ones) by default:

/opt/1A/toolchain/aarch64-v4.0.86/lib/gcc/aarch64-1a-linux-gnu/8.4.1/../../../../aarch64-1a-linux-gnu/bin/ld: /workdir/build/build-pack/build-pack-temporary-static-dependencies/install/lib/libcrypto.a(libcrypto-lib-sha1-armv8.o): relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `OPENSSL_armcap_P' which may bind externally can not be used when making a shared object; recompile with -fPIC
/workdir/build/build-pack/build-pack-temporary-static-dependencies/install/lib/libcrypto.a(libcrypto-lib-sha1-armv8.o): in function `sha1_block_data_order':
(.text+0x0): dangerous relocation: unsupported relocation
/opt/1A/toolchain/aarch64-v4.0.86/lib/gcc/aarch64-1a-linux-gnu/8.4.1/../../../../aarch64-1a-linux-gnu/bin/ld: /workdir/build/build-pack/build-pack-temporary-static-dependencies/install/lib/libcrypto.a(libcrypto-lib-chacha-armv8.o): relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `OPENSSL_armcap_P' which may bind externally can not be used when making a shared object; recompile with -fPIC
/workdir/build/build-pack/build-pack-temporary-static-dependencies/install/lib/libcrypto.a(libcrypto-lib-chacha-armv8.o): in function `ChaCha20_ctr32':
(.text+0x6c): dangerous relocation: unsupported relocation
/opt/1A/toolchain/aarch64-v4.0.86/lib/gcc/aarch64-1a-linux-gnu/8.4.1/../../../../aarch64-1a-linux-gnu/bin/ld: /workdir/build/build-pack/build-pack-temporary-static-dependencies/install/lib/libcrypto.a(libcrypto-lib-sha256-armv8.o): relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `OPENSSL_armcap_P' which may bind externally can not be used when making a shared object; recompile with -fPIC /workdir/build/build-pack/build-pack-temporary-static-dependencies/install/lib/libcrypto.a(libcrypto-lib-sha256-armv8.o): in function `sha256_block_data_order':
(.text+0x0): dangerous relocation: unsupported relocation
/opt/1A/toolchain/aarch64-v4.0.86/lib/gcc/aarch64-1a-linux-gnu/8.4.1/../../../../aarch64-1a-linux-gnu/bin/ld: /workdir/build/build-pack/build-pack-temporary-static-dependencies/install/lib/libcrypto.a(libcrypto-lib-sha512-armv8.o): relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `OPENSSL_armcap_P' which may bind externally can not be used when making a shared object; recompile with -fPIC /workdir/build/build-pack/build-pack-temporary-static-dependencies/install/lib/libcrypto.a(libcrypto-lib-sha512-armv8.o): in function `sha512_block_data_order':
(.text+0x0): dangerous relocation: unsupported relocation
/opt/1A/toolchain/aarch64-v4.0.86/lib/gcc/aarch64-1a-linux-gnu/8.4.1/../../../../aarch64-1a-linux-gnu/bin/ld: /workdir/build/build-pack/build-pack-temporary-static-dependencies/install/lib/libcrypto.a(libcrypto-lib-poly1305-armv8.o): relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `OPENSSL_armcap_P' which may bind externally can not be used when making a shared object; recompile with -fPIC
/workdir/build/build-pack/build-pack-temporary-static-dependencies/install/lib/libcrypto.a(libcrypto-lib-poly1305-armv8.o): in function `poly1305_init':
(.text+0x14): dangerous relocation: unsupported relocation
/workdir/build/build-pack/build-pack-temporary-static-dependencies/install/lib/libcrypto.a(libcrypto-lib-poly1305-armv8.o): in function `poly1305_emit_neon':
(.text+0x8e4): relocation truncated to fit: R_AARCH64_CONDBR19 against symbol `poly1305_emit' defined in .text section in /workdir/build/build-pack/build-pack-temporary-static-dependencies/install/lib/libcrypto.a(libcrypto-lib-poly1305-armv8.o)

In poly1305-armv8.pl, hide symbols the same way they are hidden in poly1305-x86_64.pl.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13056)

show more ...

Update copyright year

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11616)

Also check for errors in x86_64-xlate.pl.

In https://github.com/openssl/openssl/pull/10883, I'd meant to exclude
the perlasm drivers since they aren't opening pipes and do not
partic

Also check for errors in x86_64-xlate.pl.

In https://github.com/openssl/openssl/pull/10883, I'd meant to exclude
the perlasm drivers since they aren't opening pipes and do not
particularly need it, but I only noticed x86_64-xlate.pl, so
arm-xlate.pl and ppc-xlate.pl got the change.

That seems to have been fine, so be consistent and also apply the change
to x86_64-xlate.pl. Checking for errors is generally a good idea.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/10930)

show more ...

Do not silently truncate files on perlasm errors

If one of the perlasm xlate drivers crashes, OpenSSL's build will
currently swallow the error and silently truncate the output to however

Do not silently truncate files on perlasm errors

If one of the perlasm xlate drivers crashes, OpenSSL's build will
currently swallow the error and silently truncate the output to however
far the driver got. This will hopefully fail to build, but better to
check such things.

Handle this by checking for errors when closing STDOUT (which is a pipe
to the xlate driver).

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10883)

show more ...

Unify all assembler file generators

They now generally conform to the following argument sequence:

script.pl "$(PERLASM_SCHEME)" [ C preprocessor arguments ... ] \

Unify all assembler file generators

They now generally conform to the following argument sequence:

script.pl "$(PERLASM_SCHEME)" [ C preprocessor arguments ... ] \
$(PROCESSOR) <output file>

However, in the spirit of being able to use these scripts manually,
they also allow for no argument, or for only the flavour, or for only
the output file. This is done by only using the last argument as
output file if it's a file (it has an extension), and only using the
first argument as flavour if it isn't a file (it doesn't have an
extension).

While we're at it, we make all $xlate calls the same, i.e. the $output
argument is always quoted, and we always die on error when trying to
start $xlate.

There's a perl lesson in this, regarding operator priority...

This will always succeed, even when it fails:

open FOO, "something" || die "ERR: $!";

The reason is that '||' has higher priority than list operators (a
function is essentially a list operator and gobbles up everything
following it that isn't lower priority), and since a non-empty string
is always true, so that ends up being exactly the same as:

open FOO, "something";

This, however, will fail if "something" can't be opened:

open FOO, "something" or die "ERR: $!";

The reason is that 'or' has lower priority that list operators,
i.e. it's performed after the 'open' call.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9884)

show more ...

ARM64 assembly pack: add ThunderX2 results.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/opens

ARM64 assembly pack: add ThunderX2 results.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8776)

show more ...

ARM64 assembly pack: make it Windows-friendly.

"Windows friendliness" means a) unified PIC-ification, unified across
all platforms; b) unified commantary delimiter; c) explicit ldur/stur

ARM64 assembly pack: make it Windows-friendly.

"Windows friendliness" means a) unified PIC-ification, unified across
all platforms; b) unified commantary delimiter; c) explicit ldur/stur,
as Visual Studio assembler can't automatically encode ldr/str as
ldur/stur when needed.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8256)

show more ...

Following the license change, modify the boilerplates in crypto/sha/

[skip ci]

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/

Following the license change, modify the boilerplates in crypto/sha/

[skip ci]

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7816)

show more ...

ARMv8 assembly pack: add Qualcomm Kryo results.

[skip ci]

Reviewed-by: Tim Hudson <tjh@openssl.org>

ARMv8 assembly pack: add Samsung Mongoose results.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Add OpenSSL copyright to .pl files

Reviewed-by: Richard Levitte <levitte@openssl.org>

Allow ILP32 compilation in AArch64 assembly pack.

Reviewed-by: Tim Hudson <tjh@openssl.org>

sha/asm/sha*-armv8.pl: add Denver and X-Gene esults.

Reviewed-by: Richard Levitte <levitte@openssl.org>

aes/asm/aesv8-armx.pl: optimize for Cortex-A5x.

ARM has optimized Cortex-A5x pipeline to favour pairs of complementary
AES instructions. While modified code improves performance of post-

aes/asm/aesv8-armx.pl: optimize for Cortex-A5x.

ARM has optimized Cortex-A5x pipeline to favour pairs of complementary
AES instructions. While modified code improves performance of post-r0p0
Cortex-A53 performance by >40% (for CBC decrypt and CTR), it hurts
original r0p0. We favour later revisions, because one can't prevent
future from coming. Improvement on post-r0p0 Cortex-A57 exceeds 50%,
while new code is not slower on r0p0, or Apple A7 for that matter.

[Update even SHA results for latest Cortex-A53.]

Reviewed-by: Richard Levitte <levitte@openssl.org>

show more ...

Add assembly support to ios64-cross.
Fix typos in ios64-cross config line.

Reviewed-by: Tim Hudson <tjh@openssl.org>

ARMv8 assembly pack: add Cortex performance numbers.

sha[1|512]-armv8.pl: get instruction endianness right.

Submitted by: Ard Biesheuvel.

Add SHA for ARMv8.