Copyright year updates


Reviewed-by: Richard Levitte <levitte@openssl.org>
Release: yes

Remove ossl_rsa_pss_params_30_set_maskgenalg().

This is an unused internal function. It should be added back
in if there is a need to set this value to something other than
NID_mgf1

Remove ossl_rsa_pss_params_30_set_maskgenalg().

This is an unused internal function. It should be added back
in if there is a need to set this value to something other than
NID_mgf1 (which is not likely).

Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20321)

show more ...

signature: Clamp PSS salt len to MD len

FIPS 186-4 section 5 "The RSA Digital Signature Algorithm", subsection
5.5 "PKCS #1" says: "For RSASSA-PSS […] the length (in bytes) of the
sa

signature: Clamp PSS salt len to MD len

FIPS 186-4 section 5 "The RSA Digital Signature Algorithm", subsection
5.5 "PKCS #1" says: "For RSASSA-PSS […] the length (in bytes) of the
salt (sLen) shall satisfy 0 <= sLen <= hLen, where hLen is the length of
the hash function output block (in bytes)."

Introduce a new option RSA_PSS_SALTLEN_AUTO_DIGEST_MAX and make it the
default. The new value will behave like RSA_PSS_SALTLEN_AUTO, but will
not use more than the digest length when signing, so that FIPS 186-4 is
not violated. This value has two advantages when compared with
RSA_PSS_SALTLEN_DIGEST: (1) It will continue to do auto-detection when
verifying signatures for maximum compatibility, where
RSA_PSS_SALTLEN_DIGEST would fail for other digest sizes. (2) It will
work for combinations where the maximum salt length is smaller than the
digest size, which typically happens with large digest sizes (e.g.,
SHA-512) and small RSA keys.

J.-S. Coron shows in "Optimal Security Proofs for PSS and Other
Signature Schemes. Advances in Cryptology – Eurocrypt 2002, volume 2332
of Lecture Notes in Computer Science, pp. 272 – 287. Springer Verlag,
2002." that longer salts than the output size of modern hash functions
do not increase security: "For example,for an application in which at
most one billion signatures will be generated, k0 = 30 bits of random
salt are actually sufficient to guarantee the same level of security as
RSA, and taking a larger salt does not increase the security level."

Signed-off-by: Clemens Lang <cllang@redhat.com>

Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19724)

show more ...

Stop raising ERR_R_MALLOC_FAILURE in most places

Since OPENSSL_malloc() and friends report ERR_R_MALLOC_FAILURE, and
at least handle the file name and line number they are called from,

Stop raising ERR_R_MALLOC_FAILURE in most places

Since OPENSSL_malloc() and friends report ERR_R_MALLOC_FAILURE, and
at least handle the file name and line number they are called from,
there's no need to report ERR_R_MALLOC_FAILURE where they are called
directly, or when SSLfatal() and RLAYERfatal() is used, the reason
`ERR_R_MALLOC_FAILURE` is changed to `ERR_R_CRYPTO_LIB`.

There were a number of places where `ERR_R_MALLOC_FAILURE` was reported
even though it was a function from a different sub-system that was
called. Those places are changed to report ERR_R_{lib}_LIB, where
{lib} is the name of that sub-system.
Some of them are tricky to get right, as we have a lot of functions
that belong in the ASN1 sub-system, and all the `sk_` calls or from
the CRYPTO sub-system.

Some extra adaptation was necessary where there were custom OPENSSL_malloc()
wrappers, and some bugs are fixed alongside these changes.

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19301)

show more ...

Rename all getters to use get/get0 in name

For functions that exist in 1.1.1 provide a simple aliases via #define.

Fixes #15236

Functions with OSSL_DECODER_, OSSL_ENCODER_,

Rename all getters to use get/get0 in name

For functions that exist in 1.1.1 provide a simple aliases via #define.

Fixes #15236

Functions with OSSL_DECODER_, OSSL_ENCODER_, OSSL_STORE_LOADER_,
EVP_KEYEXCH_, EVP_KEM_, EVP_ASYM_CIPHER_, EVP_SIGNATURE_,
EVP_KEYMGMT_, EVP_RAND_, EVP_MAC_, EVP_KDF_, EVP_PKEY_,
EVP_MD_, and EVP_CIPHER_ prefixes are renamed.

Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15405)

show more ...

add zero strenght arguments to BN and RAND RNG calls

Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15513)

Update copyright year

Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14235)

RSA: properly generate algorithm identifier for RSA-PSS signatures

Fixes #13969

- properly handle the mandatory RSA-PSS key parameters
- improve parameter checking when setting

RSA: properly generate algorithm identifier for RSA-PSS signatures

Fixes #13969

- properly handle the mandatory RSA-PSS key parameters
- improve parameter checking when setting the parameters
- compute the algorithm id at the time it is requested so it
reflects the actual parameters set
- when generating keys do not override previously set parameters
with defaults
- tests added to the test_req recipe that should cover the PSS signature
handling

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13988)

show more ...

Convert all {NAME}err() in crypto/ to their corresponding ERR_raise() call

This includes error reporting for libcrypto sub-libraries in surprising
places.

This was done using ut

Convert all {NAME}err() in crypto/ to their corresponding ERR_raise() call

This includes error reporting for libcrypto sub-libraries in surprising
places.

This was done using util/err-to-raise

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13318)

show more ...

rsa: add ossl_ prefix to internal rsa_ calls.

The functions being:
rsa_check_crt_components, rsa_check_key, rsa_check_pminusq_diff,
rsa_check_prime_factor, rsa_check_prime_fa

rsa: add ossl_ prefix to internal rsa_ calls.

The functions being:
rsa_check_crt_components, rsa_check_key, rsa_check_pminusq_diff,
rsa_check_prime_factor, rsa_check_prime_factor_range,
rsa_check_private_exponent, rsa_check_public_exponent,
rsa_digestinfo_encoding, rsa_fips186_4_gen_prob_primes, rsa_fromdata,
rsa_get0_all_params, rsa_get0_libctx, rsa_get0_pss_params_30,
rsa_get_lcm, rsa_mgf_nid2name, rsa_mp_coeff_names, rsa_mp_exp_names,
rsa_mp_factor_names, rsa_new_with_ctx, rsa_oaeppss_md2nid,
rsa_oaeppss_nid2name, rsa_padding_add_PKCS1_OAEP_mgf1_with_libctx,
rsa_padding_add_PKCS1_type_2_with_libctx,
rsa_padding_add_SSLv23_with_libctx, rsa_padding_check_PKCS1_type_2_TLS,
rsa_pkey_method, rsa_pss_params_30_copy, rsa_pss_params_30_fromdata,
rsa_pss_params_30_hashalg, rsa_pss_params_30_is_unrestricted,
rsa_pss_params_30_maskgenalg, rsa_pss_params_30_maskgenhashalg,
rsa_pss_params_30_saltlen, rsa_pss_params_30_set_defaults,
rsa_pss_params_30_set_hashalg, rsa_pss_params_30_set_maskgenalg,
rsa_pss_params_30_set_maskgenhashalg, rsa_pss_params_30_set_saltlen,
rsa_pss_params_30_set_trailerfield, rsa_pss_params_30_todata,
rsa_pss_params_30_trailerfield, rsa_pss_pkey_method, rsa_set0_all_params,
rsa_sp800_56b_check_keypair, rsa_sp800_56b_check_private,
rsa_sp800_56b_check_public, rsa_sp800_56b_derive_params_from_pq,
rsa_sp800_56b_generate_key, rsa_sp800_56b_pairwise_test,
rsa_sp800_56b_validate_strength, rsa_todata, rsa_validate_pairwise,
rsa_validate_private and rsa_validate_public.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13040)

show more ...

RSA: Add a less loaded PSS-parameter structure

RSA_PSS_PARAMS carries with it a lot of baggage in form of X509_ALGOR
and ASN1_INTEGER, which we would rather avoid in our providers.
T

RSA: Add a less loaded PSS-parameter structure

RSA_PSS_PARAMS carries with it a lot of baggage in form of X509_ALGOR
and ASN1_INTEGER, which we would rather avoid in our providers.
Therefore, we create a parallell structure - RSA_PSS_PARAMS_30 - that
contains the same information, but uses numeric identities (*) and C
integers (**). This makes it simpler to handle.

Note that neither this structure nor its contents are passed between
libcrypto and the providers. Instead, the numeric identities are
translated to and from names, which are then passed over that
boundary.

For future considerations, we might consider dropping RSA_PSS_PARAMS
entirely. For now, it's still reserved for EVP_PKEY_ASN1_METHOD code,
which RSA_PSS_PARAMS_30 is (almost entirely) reserved for use in our
providers.

(*) We use NIDs in this case, because we already have them and because
only algorithms that libcrypto knows about are permitted in PSS
restrictions. We could use any number series we want, as long as we
know for sure what they represent.

(**) That's for saltlen and for trailerfield, which are never expect
to surpass the set of numbers that fit in a regular 'int'.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11710)

show more ...

Update copyright year

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11616)

Use RAND_bytes_ex in crypto/rsa

At various points in crypto/rsa we need to get random numbers. We should
ensure that we use the correct libctx when doing so.

Reviewed-by: Tomas

Use RAND_bytes_ex in crypto/rsa

At various points in crypto/rsa we need to get random numbers. We should
ensure that we use the correct libctx when doing so.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11355)

show more ...

Deprecate the low level RSA functions.

Use of the low level RSA functions has been informally discouraged for a
long time. We now formally deprecate them.

Reviewed-by: Richard L

Deprecate the low level RSA functions.

Use of the low level RSA functions has been informally discouraged for a
long time. We now formally deprecate them.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11063)

show more ...

Reorganize local header files

Apart from public and internal header files, there is a third type called
local header files, which are located next to source files in the source
direc

Reorganize local header files

Apart from public and internal header files, there is a third type called
local header files, which are located next to source files in the source
directory. Currently, they have different suffixes like

'*_lcl.h', '*_local.h', or '*_int.h'

This commit changes the different suffixes to '*_local.h' uniformly.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)

show more ...

Following the license change, modify the boilerplates in crypto/rsa/

[skip ci]

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/

Following the license change, modify the boilerplates in crypto/rsa/

[skip ci]

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7814)

show more ...

crypto/rsa/rsa_pss.c: silence coverity warning

Reported by Coverity Scan (CID 1439138)
[extended tests]

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <mat

crypto/rsa/rsa_pss.c: silence coverity warning

Reported by Coverity Scan (CID 1439138)
[extended tests]

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7156)

show more ...

RSA padding Zeroization fixes

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7

RSA padding Zeroization fixes

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7090)

show more ...

Consistent formatting for sizeof(foo)

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4872)

This part fixes braces around if-else.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl

This part fixes braces around if-else.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4223)

show more ...

Fix a crash or unbounded allocation in RSA_padding_add_PKCS1_PSS_mgf1
and RSA_verify_PKCS1_PSS_mgf1 with 512-bit RSA vs. sha-512.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewe

Fix a crash or unbounded allocation in RSA_padding_add_PKCS1_PSS_mgf1
and RSA_verify_PKCS1_PSS_mgf1 with 512-bit RSA vs. sha-512.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2801)

show more ...

Defines and strings for special salt length values, add tests

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2236)

Copyright consolidation 08/10

Reviewed-by: Richard Levitte <levitte@openssl.org>

Remove /* foo.c */ comments

This was done by the following
find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
print unless $. == 1

Remove /* foo.c */ comments

This was done by the following
find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
print unless $. == 1 && m@/\* .*\.[ch] \*/@;
close ARGV if eof; # Close file to reset $.

And then some hand-editing of other files.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

show more ...

Cleanup: fix all sources that used EVP_MD_CTX_(create|init|destroy)

Reviewed-by: Rich Salz <rsalz@openssl.org>