Update copyright year

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Release: yes

SM4 optimization for ARM by ASIMD

This patch optimizes SM4 for ARM processor using ASIMD instruction

It will improve performance if both of following conditions are met:
1) Inpu

SM4 optimization for ARM by ASIMD

This patch optimizes SM4 for ARM processor using ASIMD instruction

It will improve performance if both of following conditions are met:
1) Input data equal to or more than 4 blocks
2) Cipher mode allows parallelism, including ECB,CTR,GCM or CBC decryption

This patch implements SM4 SBOX lookup in vector registers, with the
benefit of constant processing time over existing C implementation.

It is only enabled for micro-architecture N1/V1. In the ideal scenario,
performance can reach up to 2.7X

When either of above two conditions is not met, e.g. single block input
or CFB/OFB mode, CBC encryption, performance could drop about 50%.

The assembly code has been reviewed internally by ARM engineer
Fangming.Fang@arm.com

Signed-off-by: Daniel Hu <Daniel.Hu@arm.com>

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17951)

show more ...

SM4 optimization for ARM by HW instruction

This patch implements the SM4 optimization for ARM processor,
using SM4 HW instruction, which is an optional feature of
crypto extension fo

SM4 optimization for ARM by HW instruction

This patch implements the SM4 optimization for ARM processor,
using SM4 HW instruction, which is an optional feature of
crypto extension for aarch64 V8.

Tested on some modern ARM micro-architectures with SM4 support, the
performance uplift can be observed around 8X~40X over existing
C implementation in openssl. Algorithms that can be parallelized
(like CTR, ECB, CBC decryption) are on higher end, with algorithm
like CBC encryption on lower end (due to inter-block dependency)

Perf data on Yitian-710 2.75GHz hardware, before and after optimization:

Before:
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes 16384 bytes
SM4-CTR 105787.80k 107837.87k 108380.84k 108462.08k 108549.46k 108554.92k
SM4-ECB 111924.58k 118173.76k 119776.00k 120093.70k 120264.02k 120274.94k
SM4-CBC 106428.09k 109190.98k 109674.33k 109774.51k 109827.41k 109827.41k

After (7.4x - 36.6x faster):
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes 16384 bytes
SM4-CTR 781979.02k 2432994.28k 3437753.86k 3834177.88k 3963715.58k 3974556.33k
SM4-ECB 937590.69k 2941689.02k 3945751.81k 4328655.87k 4459181.40k 4468692.31k
SM4-CBC 890639.88k 1027746.58k 1050621.78k 1056696.66k 1058613.93k 1058701.31k

Signed-off-by: Daniel Hu <Daniel.Hu@arm.com>

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17455)

show more ...

evp: fix improper use of negative value issues

Coverity issues 1485662, 1485663 & 1485664.

Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/op

evp: fix improper use of negative value issues

Coverity issues 1485662, 1485663 & 1485664.

Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15635)

show more ...

Deprecate EVP_CIPHER_impl_ctx_size and EVP_CIPHER_CTX_buf_noconst

Fixes #15519

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged

Deprecate EVP_CIPHER_impl_ctx_size and EVP_CIPHER_CTX_buf_noconst

Fixes #15519

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15584)

show more ...

Rename all getters to use get/get0 in name

For functions that exist in 1.1.1 provide a simple aliases via #define.

Fixes #15236

Functions with OSSL_DECODER_, OSSL_ENCODER_,

Rename all getters to use get/get0 in name

For functions that exist in 1.1.1 provide a simple aliases via #define.

Fixes #15236

Functions with OSSL_DECODER_, OSSL_ENCODER_, OSSL_STORE_LOADER_,
EVP_KEYEXCH_, EVP_KEM_, EVP_ASYM_CIPHER_, EVP_SIGNATURE_,
EVP_KEYMGMT_, EVP_RAND_, EVP_MAC_, EVP_KDF_, EVP_PKEY_,
EVP_MD_, and EVP_CIPHER_ prefixes are renamed.

Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15405)

show more ...

Add "origin" field to EVP_CIPHER, EVP_MD

Add a "where did this EVP_{CIPHER,MD} come from" flag: global, via fetch,
or via EVP_{CIPHER,MD}_meth_new. Update EVP_{CIPHER,MD}_free to handle

Add "origin" field to EVP_CIPHER, EVP_MD

Add a "where did this EVP_{CIPHER,MD} come from" flag: global, via fetch,
or via EVP_{CIPHER,MD}_meth_new. Update EVP_{CIPHER,MD}_free to handle all
three origins. The flag is deliberately right before some function pointers,
so that compile-time failures (int/pointer) will occur, as opposed to
taking a bit in the existing "flags" field. The "global variable" flag
is non-zero, so the default case of using OPENSSL_zalloc (for provider
ciphers), will do the right thing. Ref-counting is a no-op for
Make up_ref no-op for global MD and CIPHER objects

Deprecate EVP_MD_CTX_md(). Added EVP_MD_CTX_get0_md() (same semantics as
the deprecated function) and EVP_MD_CTX_get1_md(). Likewise, deprecate
EVP_CIPHER_CTX_cipher() in favor of EVP_CIPHER_CTX_get0_cipher(), and add
EVP_CIPHER_CTX_get1_CIPHER().

Refactor EVP_MD_free() and EVP_MD_meth_free() to call new common
evp_md_free_int() function.
Refactor EVP_CIPHER_free() and EVP_CIPHER_meth_free() to call new common
evp_cipher_free_int() function.

Also change some flags tests to explicit test == or != zero. E.g.,
if (flags & x) --> if ((flags & x) != 0)
if (!(flags & x)) --> if ((flags & x) == 0)
Only done for those lines where "get0_cipher" calls were made.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14193)

show more ...

Update copyright year

Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14801)

Add ossl_ symbols for sm3 and sm4

Partial fix for #12964

Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14473)

Update copyright year

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/13144)

Use local IV storage in e_sm4.c

Inline the pre-13273237a65d46186b6bea0b51aec90670d4598a versions
of EVP_CIPHER_CTX_iv(), EVP_CIPHER_CTX_original_iv(), and
EVP_CIPHER_CTX_iv_noconst()

Use local IV storage in e_sm4.c

Inline the pre-13273237a65d46186b6bea0b51aec90670d4598a versions
of EVP_CIPHER_CTX_iv(), EVP_CIPHER_CTX_original_iv(), and
EVP_CIPHER_CTX_iv_noconst() in e_sm4.c.

For the legacy implementations, there's no need to use an
in-provider storage for the IV, when the crypto operations
themselves will be performed outside of the provider.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12233)

show more ...

Reorganize private crypto header files

Currently, there are two different directories which contain internal
header files of libcrypto which are meant to be shared internally:

W

Reorganize private crypto header files

Currently, there are two different directories which contain internal
header files of libcrypto which are meant to be shared internally:

While header files in 'include/internal' are intended to be shared
between libcrypto and libssl, the files in 'crypto/include/internal'
are intended to be shared inside libcrypto only.

To make things complicated, the include search path is set up in such
a way that the directive #include "internal/file.h" could refer to
a file in either of these two directoroes. This makes it necessary
in some cases to add a '_int.h' suffix to some files to resolve this
ambiguity:

#include "internal/file.h" # located in 'include/internal'
#include "internal/file_int.h" # located in 'crypto/include/internal'

This commit moves the private crypto headers from

'crypto/include/internal' to 'include/crypto'

As a result, the include directives become unambiguous

#include "internal/file.h" # located in 'include/internal'
#include "crypto/file.h" # located in 'include/crypto'

hence the superfluous '_int.h' suffixes can be stripped.

The files 'store_int.h' and 'store.h' need to be treated specially;
they are joined into a single file.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)

show more ...

Following the license change, modify the boilerplates in crypto/evp/

[skip ci]

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/

Following the license change, modify the boilerplates in crypto/evp/

[skip ci]

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7794)

show more ...

SM4: Add SM4 block cipher to EVP

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull

SM4: Add SM4 block cipher to EVP

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4552)

show more ...