Copyright year updates

Reviewed-by: Neil Horman <nhorman@openssl.org>
Release: yes
(cherry picked from commit 0ce7d1f355c1240653e320a3f6f8109c1f05f8c0)

Reviewed-by: Hugo Lan

Copyright year updates

Reviewed-by: Neil Horman <nhorman@openssl.org>
Release: yes
(cherry picked from commit 0ce7d1f355c1240653e320a3f6f8109c1f05f8c0)

Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24034)

show more ...

Fix NULL pointer deref when parsing the stable section

When parsing the stable section of a config such as this:
openssl_conf = openssl_init
[openssl_init]
stbl_section = mstbl

Fix NULL pointer deref when parsing the stable section

When parsing the stable section of a config such as this:
openssl_conf = openssl_init
[openssl_init]
stbl_section = mstbl
[mstbl]
id-tc26 = min

Can lead to a SIGSEGV, as the parsing code doesnt recognize min as a
proper section name without a trailing colon to associate it with a
value. As a result the stack of configuration values has an entry with
a null value in it, which leads to the SIGSEGV in do_tcreate when we
attempt to pass NULL to strtoul.

Fix it by skipping any entry in the config name/value list that has a
null value, prior to passing it to stroul

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22988)

show more ...

Stop raising ERR_R_MALLOC_FAILURE in most places

Since OPENSSL_malloc() and friends report ERR_R_MALLOC_FAILURE, and
at least handle the file name and line number they are called from,

Stop raising ERR_R_MALLOC_FAILURE in most places

Since OPENSSL_malloc() and friends report ERR_R_MALLOC_FAILURE, and
at least handle the file name and line number they are called from,
there's no need to report ERR_R_MALLOC_FAILURE where they are called
directly, or when SSLfatal() and RLAYERfatal() is used, the reason
`ERR_R_MALLOC_FAILURE` is changed to `ERR_R_CRYPTO_LIB`.

There were a number of places where `ERR_R_MALLOC_FAILURE` was reported
even though it was a function from a different sub-system that was
called. Those places are changed to report ERR_R_{lib}_LIB, where
{lib} is the name of that sub-system.
Some of them are tricky to get right, as we have a lot of functions
that belong in the ASN1 sub-system, and all the `sk_` calls or from
the CRYPTO sub-system.

Some extra adaptation was necessary where there were custom OPENSSL_malloc()
wrappers, and some bugs are fixed alongside these changes.

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19301)

show more ...

CRYPTO: refactor ERR_raise()+ERR_add_error_data() to ERR_raise_data()

This is not done absolutely everywhere, as there are places where
the use of ERR_add_error_data() is quite complex,

CRYPTO: refactor ERR_raise()+ERR_add_error_data() to ERR_raise_data()

This is not done absolutely everywhere, as there are places where
the use of ERR_add_error_data() is quite complex, but at least the
simple cases are done.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13318)

show more ...

Convert all {NAME}err() in crypto/ to their corresponding ERR_raise() call

This includes error reporting for libcrypto sub-libraries in surprising
places.

This was done using ut

Convert all {NAME}err() in crypto/ to their corresponding ERR_raise() call

This includes error reporting for libcrypto sub-libraries in surprising
places.

This was done using util/err-to-raise

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13318)

show more ...

Fix safestack issues in conf.h

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/1

Fix safestack issues in conf.h

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12781)

show more ...

Update copyright year

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11839)

In OpenSSL builds, declare STACK for datatypes ...

... and only *define* them in the source files that need them.
Use DEFINE_OR_DECLARE which is set appropriately for internal builds

In OpenSSL builds, declare STACK for datatypes ...

... and only *define* them in the source files that need them.
Use DEFINE_OR_DECLARE which is set appropriately for internal builds
and not non-deprecated builds.

Deprecate stack-of-block

Better documentation

Move some ASN1 struct typedefs to types.h

Update ParseC to handle this. Most of all, ParseC needed to be more
consistent. The handlers are "recursive", in so far that they are called
again and again until they terminate, which depends entirely on what the
"massager" returns. There's a comment at the beginning of ParseC that
explains how that works. {Richard Levtte}

Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10669)

show more ...

Following the license change, modify the boilerplates in crypto/asn1/

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7772)

This has been added to avoid the situation where some host ctype.h functions
return true for characters > 127. I.e. they are allowing extended ASCII
characters through which then cause probl

This has been added to avoid the situation where some host ctype.h functions
return true for characters > 127. I.e. they are allowing extended ASCII
characters through which then cause problems. E.g. marking superscript '2' as
a number then causes the common (ch - '0') conversion to number to fail
miserably. Likewise letters with diacritical marks can also cause problems.

If a non-ASCII character set is being used (currently only EBCDIC), it is
adjusted for.

The implementation uses a single table with a bit for each of the defined
classes. These functions accept an int argument and fail for
values out of range or for characters outside of the ASCII set. They will
work for both signed and unsigned character inputs.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4102)

show more ...

Constify some input buffers in asn1

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1215)

Copyright consolidation 08/10

Reviewed-by: Richard Levitte <levitte@openssl.org>

GH601: Various spelling fixes.

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Remove /* foo.c */ comments

This was done by the following
find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
print unless $. == 1

Remove /* foo.c */ comments

This was done by the following
find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
print unless $. == 1 && m@/\* .*\.[ch] \*/@;
close ARGV if eof; # Close file to reset $.

And then some hand-editing of other files.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

show more ...

Identify and move common internal libcrypto header files

There are header files in crypto/ that are used by a number of crypto/
submodules. Move those to crypto/include/internal and ada

Identify and move common internal libcrypto header files

There are header files in crypto/ that are used by a number of crypto/
submodules. Move those to crypto/include/internal and adapt the
affected source code and Makefiles.

The header files that got moved are:

crypto/cryptolib.h
crypto/md32_common.h

Reviewed-by: Rich Salz <rsalz@openssl.org>

show more ...

Use p==NULL not !p (in if statements, mainly)

Reviewed-by: Tim Hudson <tjh@openssl.org>

Use "==0" instead of "!strcmp" etc

For the various string-compare routines (strcmp, strcasecmp, str.*cmp)
use "strcmp()==0" instead of "!strcmp()"

Reviewed-by: Tim Hudson <tjh@o

Use "==0" instead of "!strcmp" etc

For the various string-compare routines (strcmp, strcasecmp, str.*cmp)
use "strcmp()==0" instead of "!strcmp()"

Reviewed-by: Tim Hudson <tjh@openssl.org>

show more ...

free NULL cleanup 11

Don't check for NULL before calling free functions. This gets:
ERR_STATE_free
ENGINE_free
DSO_free
CMAC_CTX_free

free NULL cleanup 11

Don't check for NULL before calling free functions. This gets:
ERR_STATE_free
ENGINE_free
DSO_free
CMAC_CTX_free
COMP_CTX_free
CONF_free
NCONF_free NCONF_free_data _CONF_free_data
A sk_free use within OBJ_sigid_free
TS_TST_INFO_free (rest of TS_ API was okay)
Doc update for UI_free (all uses were fine)
X509V3_conf_free
X509V3_section_free
X509V3_string_free

Reviewed-by: Richard Levitte <levitte@openssl.org>

show more ...

Run util/openssl-format-source -v -c .

Reviewed-by: Tim Hudson <tjh@openssl.org>

oops, add missing asn_mstbl.c