Update copyright year

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15801)

aes: rename new bsaes_ symbols -> ossl_bsaes_ ones

bsaes_cbc_encrypt -> ossl_bsaes_cbc_encrypt
bsaes_ctr32_encrypt_blocks -> ossl_bsaes_ctr32_encrypt_blocks
bsaes_xts_decrypt -> ossl

aes: rename new bsaes_ symbols -> ossl_bsaes_ ones

bsaes_cbc_encrypt -> ossl_bsaes_cbc_encrypt
bsaes_ctr32_encrypt_blocks -> ossl_bsaes_ctr32_encrypt_blocks
bsaes_xts_decrypt -> ossl_bsaes_xts_decrypt
bsaes_xts_encrypt -> ossl_bsaes_xts_encrypt

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/15445)

show more ...

Update copyright year

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11616)

Also check for errors in x86_64-xlate.pl.

In https://github.com/openssl/openssl/pull/10883, I'd meant to exclude
the perlasm drivers since they aren't opening pipes and do not
partic

Also check for errors in x86_64-xlate.pl.

In https://github.com/openssl/openssl/pull/10883, I'd meant to exclude
the perlasm drivers since they aren't opening pipes and do not
particularly need it, but I only noticed x86_64-xlate.pl, so
arm-xlate.pl and ppc-xlate.pl got the change.

That seems to have been fine, so be consistent and also apply the change
to x86_64-xlate.pl. Checking for errors is generally a good idea.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/10930)

show more ...

x86_64: Add endbranch at function entries for Intel CET

To support Intel CET, all indirect branch targets must start with
endbranch. Here is a patch to add endbranch to function entries

x86_64: Add endbranch at function entries for Intel CET

To support Intel CET, all indirect branch targets must start with
endbranch. Here is a patch to add endbranch to function entries
in x86_64 assembly codes which are indirect branch targets as
discovered by running openssl testsuite on Intel CET machine and
visual inspection.

Verified with

$ CC="gcc -Wl,-z,cet-report=error" ./Configure shared linux-x86_64 -fcf-protection
$ make
$ make test

and

$ CC="gcc -mx32 -Wl,-z,cet-report=error" ./Configure shared linux-x32 -fcf-protection
$ make
$ make test # <<< passed with https://github.com/openssl/openssl/pull/10988

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10982)

show more ...

Do not silently truncate files on perlasm errors

If one of the perlasm xlate drivers crashes, OpenSSL's build will
currently swallow the error and silently truncate the output to however

Do not silently truncate files on perlasm errors

If one of the perlasm xlate drivers crashes, OpenSSL's build will
currently swallow the error and silently truncate the output to however
far the driver got. This will hopefully fail to build, but better to
check such things.

Handle this by checking for errors when closing STDOUT (which is a pipe
to the xlate driver).

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10883)

show more ...

Fix some typos

Reported-by: misspell-fixer <https://github.com/vlajos/misspell-fixer>

CLA: trivial

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Revie

Fix some typos

Reported-by: misspell-fixer <https://github.com/vlajos/misspell-fixer>

CLA: trivial

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10544)

show more ...

Unify all assembler file generators

They now generally conform to the following argument sequence:

script.pl "$(PERLASM_SCHEME)" [ C preprocessor arguments ... ] \

Unify all assembler file generators

They now generally conform to the following argument sequence:

script.pl "$(PERLASM_SCHEME)" [ C preprocessor arguments ... ] \
$(PROCESSOR) <output file>

However, in the spirit of being able to use these scripts manually,
they also allow for no argument, or for only the flavour, or for only
the output file. This is done by only using the last argument as
output file if it's a file (it has an extension), and only using the
first argument as flavour if it isn't a file (it doesn't have an
extension).

While we're at it, we make all $xlate calls the same, i.e. the $output
argument is always quoted, and we always die on error when trying to
start $xlate.

There's a perl lesson in this, regarding operator priority...

This will always succeed, even when it fails:

open FOO, "something" || die "ERR: $!";

The reason is that '||' has higher priority than list operators (a
function is essentially a list operator and gobbles up everything
following it that isn't lower priority), and since a non-empty string
is always true, so that ends up being exactly the same as:

open FOO, "something";

This, however, will fail if "something" can't be opened:

open FOO, "something" or die "ERR: $!";

The reason is that 'or' has lower priority that list operators,
i.e. it's performed after the 'open' call.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9884)

show more ...

Fix some CFI issues in x86_64 assembly

The add/double shortcut in ecp_nistz256-x86_64.pl left one instruction
point that did not unwind, and the "slow" path in AES_cbc_encrypt was
no

Fix some CFI issues in x86_64 assembly

The add/double shortcut in ecp_nistz256-x86_64.pl left one instruction
point that did not unwind, and the "slow" path in AES_cbc_encrypt was
not annotated correctly. For the latter, add
.cfi_{remember,restore}_state support to perlasm.

Next, fill in a bunch of functions that are missing no-op .cfi_startproc
and .cfi_endproc blocks. libunwind cannot unwind those stack frames
otherwise.

Finally, work around a bug in libunwind by not encoding rflags. (rflags
isn't a callee-saved register, so there's not much need to annotate it
anyway.)

These were found as part of ABI testing work in BoringSSL.

Reviewed-by: Richard Levitte <levitte@openssl.org>
GH: #8109

show more ...

Following the license change, modify the boilerplates in crypto/aes/

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7771)

aes/asm/*-x86_64.pl: add CFI annotations.

Reviewed-by: Rich Salz <rsalz@openssl.org>

x86_64 assembly pack: Win64 SEH face-lift.

- harmonize handlers with guidelines and themselves;
- fix some bugs in handlers;
- add missing handlers in chacha and ecp_nistz256 modules

x86_64 assembly pack: Win64 SEH face-lift.

- harmonize handlers with guidelines and themselves;
- fix some bugs in handlers;
- add missing handlers in chacha and ecp_nistz256 modules;

Reviewed-by: Rich Salz <rsalz@openssl.org>

show more ...

x86_64 assembly pack: add Goldmont performance results.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Remove trailing whitespace from some files.

The prevailing style seems to not have trailing whitespace, but a few
lines do. This is mostly in the perlasm files, but a few C files got

Remove trailing whitespace from some files.

The prevailing style seems to not have trailing whitespace, but a few
lines do. This is mostly in the perlasm files, but a few C files got
them after the reformat. This is the result of:

find . -name '*.pl' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
find . -name '*.c' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
find . -name '*.h' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'

Then bn_prime.h was excluded since this is a generated file.

Note mkerr.pl has some changes in a heredoc for some help output, but
other lines there lack trailing whitespace too.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

show more ...

x86_64 assembly pack: tolerate spaces in source directory name.

[as it is now quoting $output is not required, but done just in case]

Reviewed-by: Richard Levitte <levitte@openssl.o

x86_64 assembly pack: tolerate spaces in source directory name.

[as it is now quoting $output is not required, but done just in case]

Reviewed-by: Richard Levitte <levitte@openssl.org>

show more ...

Add OpenSSL copyright to .pl files

Reviewed-by: Richard Levitte <levitte@openssl.org>

x86[_64] assembly pack: add Silvermont performance data.

Reviewed-by: Rich Salz <rsalz@openssl.org>

aes/asm/bsaes-x86_64.pl: Atom-specific optimization.

aes/asm/bsaes-x86_64.pl: fix Windows-specific bug in XTS.

PR: 3139

aes/asm/bsaes-*.pl: improve decrypt performance.

Improve decrypt performance by 10-20% depending on platform. Thanks
to Jussi Kivilinna for providing valuable hint. Also thanks to Ard

aes/asm/bsaes-*.pl: improve decrypt performance.

Improve decrypt performance by 10-20% depending on platform. Thanks
to Jussi Kivilinna for providing valuable hint. Also thanks to Ard
Biesheuvel.

show more ...

x86_64 assembly pack: make Windows build more robust.

PR: 2963 and a number of others

x86_64 assembly pack: make it possible to compile with Perl located on
path with spaces.

PR: 2835

bsaes-x86_64.pl: optimize key conversion.

bsaes-x86_64.pl: fix buffer overrun in tail processing.

bsaes-x86_64.pl: add Win64 SEH and "hadrware" calls to aes-x86_64.pl.