Fix AES OCB encrypt/decrypt for x86 AES-NI

aesni_ocb_encrypt and aesni_ocb_decrypt operate by having a fast-path
that performs operations on 6 16-byte blocks concurrently (the
"grand

Fix AES OCB encrypt/decrypt for x86 AES-NI

aesni_ocb_encrypt and aesni_ocb_decrypt operate by having a fast-path
that performs operations on 6 16-byte blocks concurrently (the
"grandloop") and then proceeds to handle the "short" tail (which can
be anywhere from 0 to 5 blocks) that remain.

As part of initialization, the assembly initializes $len to the true
length, less 96 bytes and converts it to a pointer so that the $inp
can be compared to it. Each iteration of "grandloop" checks to see if
there's a full 96-byte chunk to process, and if so, continues. Once
this has been exhausted, it falls through to "short", which handles
the remaining zero to five blocks.

Unfortunately, the jump at the end of "grandloop" had a fencepost
error, doing a `jb` ("jump below") rather than `jbe` (jump below or
equal). This should be `jbe`, as $inp is pointing to the *end* of the
chunk currently being handled. If $inp == $len, that means that
there's a whole 96-byte chunk waiting to be handled. If $inp > $len,
then there's 5 or fewer 16-byte blocks left to be handled, and the
fall-through is intended.

The net effect of `jb` instead of `jbe` is that the last 16-byte block
of the last 96-byte chunk was completely omitted. The contents of
`out` in this position were never written to. Additionally, since
those bytes were never processed, the authentication tag generated is
also incorrect.

The same fencepost error, and identical logic, exists in both
aesni_ocb_encrypt and aesni_ocb_decrypt.

This addresses CVE-2022-2097.

Co-authored-by: Alejandro Sedeño <asedeno@google.com>
Co-authored-by: David Benjamin <davidben@google.com>

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>

show more ...

Update copyright year

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11616)

Also check for errors in x86_64-xlate.pl.

In https://github.com/openssl/openssl/pull/10883, I'd meant to exclude
the perlasm drivers since they aren't opening pipes and do not
partic

Also check for errors in x86_64-xlate.pl.

In https://github.com/openssl/openssl/pull/10883, I'd meant to exclude
the perlasm drivers since they aren't opening pipes and do not
particularly need it, but I only noticed x86_64-xlate.pl, so
arm-xlate.pl and ppc-xlate.pl got the change.

That seems to have been fine, so be consistent and also apply the change
to x86_64-xlate.pl. Checking for errors is generally a good idea.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/10930)

show more ...

Do not silently truncate files on perlasm errors

If one of the perlasm xlate drivers crashes, OpenSSL's build will
currently swallow the error and silently truncate the output to however

Do not silently truncate files on perlasm errors

If one of the perlasm xlate drivers crashes, OpenSSL's build will
currently swallow the error and silently truncate the output to however
far the driver got. This will hopefully fail to build, but better to
check such things.

Handle this by checking for errors when closing STDOUT (which is a pipe
to the xlate driver).

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10883)

show more ...

Unify all assembler file generators

They now generally conform to the following argument sequence:

script.pl "$(PERLASM_SCHEME)" [ C preprocessor arguments ... ] \

Unify all assembler file generators

They now generally conform to the following argument sequence:

script.pl "$(PERLASM_SCHEME)" [ C preprocessor arguments ... ] \
$(PROCESSOR) <output file>

However, in the spirit of being able to use these scripts manually,
they also allow for no argument, or for only the flavour, or for only
the output file. This is done by only using the last argument as
output file if it's a file (it has an extension), and only using the
first argument as flavour if it isn't a file (it doesn't have an
extension).

While we're at it, we make all $xlate calls the same, i.e. the $output
argument is always quoted, and we always die on error when trying to
start $xlate.

There's a perl lesson in this, regarding operator priority...

This will always succeed, even when it fails:

open FOO, "something" || die "ERR: $!";

The reason is that '||' has higher priority than list operators (a
function is essentially a list operator and gobbles up everything
following it that isn't lower priority), and since a non-empty string
is always true, so that ends up being exactly the same as:

open FOO, "something";

This, however, will fail if "something" can't be opened:

open FOO, "something" or die "ERR: $!";

The reason is that 'or' has lower priority that list operators,
i.e. it's performed after the 'open' call.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9884)

show more ...

Following the license change, modify the boilerplates in crypto/aes/

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7771)

Many spelling fixes/typo's corrected.

Around 138 distinct errors found and fixed; thanks!

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tim Hudson <tjh@openssl.org>

Many spelling fixes/typo's corrected.

Around 138 distinct errors found and fixed; thanks!

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3459)

show more ...

Remove filename argument to x86 asm_init.

The assembler already knows the actual path to the generated file and,
in other perlasm architectures, is left to manage debug symbols itself.

Remove filename argument to x86 asm_init.

The assembler already knows the actual path to the generated file and,
in other perlasm architectures, is left to manage debug symbols itself.
Notably, in OpenSSL 1.1.x's new build system, which allows a separate
build directory, converting .pl to .s as the scripts currently do result
in the wrong paths.

This also avoids inconsistencies from some of the files using $0 and
some passing in the filename.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3431)

show more ...

x86 assembly pack: update performance results.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Remove trailing whitespace from some files.

The prevailing style seems to not have trailing whitespace, but a few
lines do. This is mostly in the perlasm files, but a few C files got

Remove trailing whitespace from some files.

The prevailing style seems to not have trailing whitespace, but a few
lines do. This is mostly in the perlasm files, but a few C files got
them after the reformat. This is the result of:

find . -name '*.pl' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
find . -name '*.c' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
find . -name '*.h' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'

Then bn_prime.h was excluded since this is a generated file.

Note mkerr.pl has some changes in a heredoc for some help output, but
other lines there lack trailing whitespace too.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

show more ...

Add OpenSSL copyright to .pl files

Reviewed-by: Richard Levitte <levitte@openssl.org>

Unified - adapt the generation of aes assembler to use GENERATE

This gets rid of the BEGINRAW..ENDRAW sections in crypto/aes/build.info.

This also moves the assembler generating per

Unified - adapt the generation of aes assembler to use GENERATE

This gets rid of the BEGINRAW..ENDRAW sections in crypto/aes/build.info.

This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.

Reviewed-by: Andy Polyakov <appro@openssl.org>

show more ...

x86[_64] assembly pack: add optimized AES-NI OCB subroutines.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix typos

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

aes/asm/aesni-x86.pl: fix typo affecting Windows build.

Reviewed-by: Matt Caswell <matt@openssl.org>

aes/asm/aesni-x86[_64].pl update.

This addresses

- request for improvement for faster key setup in RT#3576;
- clearing registers and stack in RT#3554 (this is more of a gesture

aes/asm/aesni-x86[_64].pl update.

This addresses

- request for improvement for faster key setup in RT#3576;
- clearing registers and stack in RT#3554 (this is more of a gesture to
see if there will be some traction from compiler side);
- more commentary around input parameters handling and stack layout
(desired when RT#3553 was reviewed);
- minor size and single block performance optimization (was lying around);

Reviewed-by: Matt Caswell <matt@openssl.org>

show more ...

aes/asm/aesni-x86[_64].pl: minor Atom-specific performance tweak.

aes/asm/aesni-x86_64.pl: further optimization for Atom Silvermont.

Improve CBC decrypt and CTR by ~13/16%, which adds up to ~25/33%
improvement over "pre-Silvermont" version. [Add perfor

aes/asm/aesni-x86_64.pl: further optimization for Atom Silvermont.

Improve CBC decrypt and CTR by ~13/16%, which adds up to ~25/33%
improvement over "pre-Silvermont" version. [Add performance table to
aesni-x86.pl].

show more ...

crypto/aes/asm/aesni-x86[_64].pl update, up to 14% improvement on
Atom Silvermont. On other CPUs one can observe 1% loss on some
algorithms.

perlasm: fix symptom-less bugs, missing semicolons and 'my' declarations.

aesni-x86[_64].pl: fix bug in CCM code.

aes/asm/aesni-*.pl: fix CCM and further optimize it.
modes/ccm128.c: minor branch optimization.

aesni-x86[_64].pl: relax alignment requirement.

aesni-x86[_64].pl: optimize for Sandy Bridge and add XTS mode.

perlasm/x86asm.pl: move aesni and pclmulqdq opcodes to aesni-x86.pl and
ghash-x86.pl.