APPS: pkeyparam: Support setting properties

The -provider and -propquery options did not work on pkeyparam. Fix this
and add tests that check that operations that would usually fail with

APPS: pkeyparam: Support setting properties

The -provider and -propquery options did not work on pkeyparam. Fix this
and add tests that check that operations that would usually fail with
the FIPS provider work when run with

| -provider default -propquery '?fips!=yes'

See also 30b2c3592e8511b60d44f93eb657a1ecb3662c08, which previously
fixed the same problem in dsaparam and gendsa. See also the initial
report in https://bugzilla.redhat.com/show_bug.cgi?id=2094956.

Signed-off-by: Clemens Lang <cllang@redhat.com>

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/18717)

show more ...

APPS: Improve diagnostics on missing/extra args and unknown cipher/digest

Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16450)

APPS: Replace 'OPT_ERR = -1, OPT_EOF = 0, OPT_HELP' by OPT_COMMON macro

Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15111)

Update copyright year

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14512)

Handle NULL result of ERR_reason_error_string() in some apps

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/op

Handle NULL result of ERR_reason_error_string() in some apps

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13920)

show more ...

Check non-option arguments

Make sure all commands check to see if there are any "extra" arguments
after the options, and print an error if so.

Made all error messages consistent

Check non-option arguments

Make sure all commands check to see if there are any "extra" arguments
after the options, and print an error if so.

Made all error messages consistent (which is to say, minimal).

Fixes: #13527

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13563)

show more ...

Update copyright year

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11616)

cmdline app: add provider commandline options.

Add a -provider option to allow providers to be loaded. This option can be
specified multiple times.

Add a -provider_path option t

cmdline app: add provider commandline options.

Add a -provider option to allow providers to be loaded. This option can be
specified multiple times.

Add a -provider_path option to allow the path to providers to be specified.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11167)

show more ...

Deprecate EC command line apps.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11106)

Add "sections" to -help output

Remove "Valid options" label, since all commands have sections (and
[almost] always the first one is "General options").
Have "list --options" ignore s

Add "sections" to -help output

Remove "Valid options" label, since all commands have sections (and
[almost] always the first one is "General options").
Have "list --options" ignore section headers
Reformat ts's additional help

Add output section

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9953)

show more ...

Following the license change, modify the boilerplates in apps/

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7765)

Update copyright year

Reviewed-by: Richard Levitte <levitte@openssl.org>

apps: Don't include progs.h in apps.h

Everything in apps includes apps.h, because that one declares apps
internal library routines. However, progs.h doesn't declare library
routines

apps: Don't include progs.h in apps.h

Everything in apps includes apps.h, because that one declares apps
internal library routines. However, progs.h doesn't declare library
routines, but rather the main commands and their options, and there's
no reason why the library modules should include it.

So, remove the inclusion of progs.h from apps.h and add that inclusion
in all command source files.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5222)

show more ...

Support public key and param check in EVP interface

EVP_PKEY_public_check() and EVP_PKEY_param_check()

Doc and test cases are added

Reviewed-by: Tim Hudson <tjh@openssl.org

Support public key and param check in EVP interface

EVP_PKEY_public_check() and EVP_PKEY_param_check()

Doc and test cases are added

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4647)

show more ...

Clean up a bundle of codingstyle stuff in apps directory

Mostly braces and NULL pointer check and also copyright year bump

Signed-off-by: Paul Yang <paulyang.inf@gmail.com>

Clean up a bundle of codingstyle stuff in apps directory

Mostly braces and NULL pointer check and also copyright year bump

Signed-off-by: Paul Yang <paulyang.inf@gmail.com>

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3657)

show more ...

If an engine comes up explicitely, it must also come down explicitely

In apps/apps.c, one can set up an engine with setup_engine().
However, we freed the structural reference immediately

If an engine comes up explicitely, it must also come down explicitely

In apps/apps.c, one can set up an engine with setup_engine().
However, we freed the structural reference immediately, which means
that for engines that don't already have a structural reference
somewhere else (because it's a built in engine), we end up returning
an invalid reference.

Instead, the function release_engine() is added, and called at the end
of the routines that call setup_engine().

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1643)

show more ...

Constify command options

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from ht

Constify command options

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1694)

show more ...

Copyright consolidation 01/10

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>

argv was set but unused

Also gives an error message when you gave it a parameter it didn't expect.

Reviewed-by: Rich Salz <rsalz@openssl.org>

MR: #2009

Centralise loading default apps config file

Loading the config file after processing command line options can
cause problems, e.g. where an engine provides new ciphers/digests
these

Centralise loading default apps config file

Loading the config file after processing command line options can
cause problems, e.g. where an engine provides new ciphers/digests
these are not then recoginised on the command line. Move the
default config file loading to before the command line option
processing. Whilst we're doing this we might as well centralise
this instead of doing it individually for each application. Finally
if we do it before the OpenSSL_add_ssl_algorithms() call then
ciphersuites provided by an engine (e.g. GOST) can be available to
the apps.

RT#4085
RT#4086

Reviewed-by: Richard Levitte <levitte@openssl.org>

show more ...

Change the way apps open their input and output files

The different apps had the liberty to decide whether they would open their
input and output files in binary mode or not, which could

Change the way apps open their input and output files

The different apps had the liberty to decide whether they would open their
input and output files in binary mode or not, which could be confusing if
two different apps were handling the same type of file in different ways.

The solution is to centralise the decision of low level file organisation,
and that the apps would use a selection of formats to state the intent of
the file.

Reviewed-by: Tim Hudson <tjh@openssl.org>

show more ...

Restore module loading

The module loading feature got broken a while ago, so restore it, but
have it a bit more explicit this time around.

Reviewed-by: Stephen Henson <steve@ope

Restore module loading

The module loading feature got broken a while ago, so restore it, but
have it a bit more explicit this time around.

Reviewed-by: Stephen Henson <steve@openssl.org>

show more ...

fewer NO_ENGINE #ifdef's

Make setup_engine be a dummy if NO_ENGINE is enabled.
The option is not enabled if NO_ENGINE is enabled, so the one "wasted"
variable just sits there. Remove

fewer NO_ENGINE #ifdef's

Make setup_engine be a dummy if NO_ENGINE is enabled.
The option is not enabled if NO_ENGINE is enabled, so the one "wasted"
variable just sits there. Removes some variables and code.

Reviewed-by: Richard Levitte <levitte@openssl.org>

show more ...

Big apps cleanup (option-parsing, etc)

This is merges the old "rsalz-monolith" branch over to master. The biggest
change is that option parsing switch from cascasding 'else if strcmp("-

Big apps cleanup (option-parsing, etc)

This is merges the old "rsalz-monolith" branch over to master. The biggest
change is that option parsing switch from cascasding 'else if strcmp("-foo")'
to a utility routine and somethin akin to getopt. Also, an error in the
command line no longer prints the full summary; use -help (or --help :)
for that. There have been many other changes and code-cleanup, see
bullet list below.

Special thanks to Matt for the long and detailed code review.

TEMPORARY:
For now, comment out CRYPTO_mem_leaks() at end of main

Tickets closed:
RT3515: Use 3DES in pkcs12 if built with no-rc2
RT1766: s_client -reconnect and -starttls broke
RT2932: Catch write errors
RT2604: port should be 'unsigned short'
RT2983: total_bytes undeclared #ifdef RENEG
RT1523: Add -nocert to fix output in x509 app
RT3508: Remove unused variable introduced by b09eb24
RT3511: doc fix; req default serial is random
RT1325,2973: Add more extensions to c_rehash
RT2119,3407: Updated to dgst.pod
RT2379: Additional typo fix
RT2693: Extra include of string.h
RT2880: HFS is case-insensitive filenames
RT3246: req command prints version number wrong

Other changes; incompatibilities marked with *:
Add SCSV support
Add -misalign to speed command
Make dhparam, dsaparam, ecparam, x509 output C in proper style
Make some internal ocsp.c functions void
Only display cert usages with -help in verify
Use global bio_err, remove "BIO*err" parameter from functions
For filenames, - always means stdin (or stdout as appropriate)
Add aliases for -des/aes "wrap" ciphers.
*Remove support for IISSGC (server gated crypto)
*The undocumented OCSP -header flag is now "-header name=value"
*Documented the OCSP -header flag

Reviewed-by: Matt Caswell <matt@openssl.org>

show more ...

Run util/openssl-format-source -v -c .

Reviewed-by: Tim Hudson <tjh@openssl.org>