test: switch to new-style ASSERT_EQ macros (#4159)

Switch from old-style ASSERT macro to new-style ASSERT_EQ,... macros.

Using new-style macros makes it easier to debug test failure

test: switch to new-style ASSERT_EQ macros (#4159)

Switch from old-style ASSERT macro to new-style ASSERT_EQ,... macros.

Using new-style macros makes it easier to debug test failures

Fixes: https://github.com/libuv/libuv/issues/2974

show more ...

test: silence more valgrind warnings (#3917)

Pass the loop to MAKE_VALGRIND_HAPPY() so it's explicit on which loop
needs to be cleaned up. Since it asserts on uv_loop_close(), need to

test: silence more valgrind warnings (#3917)

Pass the loop to MAKE_VALGRIND_HAPPY() so it's explicit on which loop
needs to be cleaned up. Since it asserts on uv_loop_close(), need to
remove a couple of those that were being done before the call.

Cleanup where loop was assigned, so the entire test either uses loop or
uv_default_loop(). Not both.

Also take care of any reqs that may have been left uncleaned.

show more ...

unix: drop kfreebsd support (#3835)

Because kFreeBSD is dead. RIP.

Fixes: https://github.com/libuv/libuv/issues/3833

test,udp6: fix udp_ipv6 test flakiness

We seem to be receiving unrelated network traffic from other libuv
tests. Add some debugging output, in case that happens in the future,
and fi

test,udp6: fix udp_ipv6 test flakiness

We seem to be receiving unrelated network traffic from other libuv
tests. Add some debugging output, in case that happens in the future,
and filter out any messages received that we didn't send.

Fixes: https://github.com/libuv/libuv/issues/2130
Fixes: https://github.com/libuv/libuv/issues/2467
PR-URL: https://github.com/libuv/libuv/pull/2617
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>

show more ...

test,openbsd: use RETURN_SKIP in UDP IPv6 tests

IPv6-IPv4 dual stack is not supported on OpenBSD.

Upstreamed from the OpenBSD Ports Collection.

PR-URL: https://github.com/l

test,openbsd: use RETURN_SKIP in UDP IPv6 tests

IPv6-IPv4 dual stack is not supported on OpenBSD.

Upstreamed from the OpenBSD Ports Collection.

PR-URL: https://github.com/libuv/libuv/pull/1797
Reviewed-By: Aaron Bieber <deftly@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>

show more ...

test: add NetBSD support to test-udp-ipv6.c

NetBSD and FreeBSD can share the can_ipv6_ipv4_dual() function as
is. This commit also corrects the function definition to be
compliant wi

test: add NetBSD support to test-udp-ipv6.c

NetBSD and FreeBSD can share the can_ipv6_ipv4_dual() function as
is. This commit also corrects the function definition to be
compliant with C standards. This fixes a warning on
NetBSD 8.99.2 with GCC 5.4.0.

PR-URL: https://github.com/libuv/libuv/pull/1535
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>

show more ...

cygwin: implement support for cygwin and msys2

Cygwin and MSYS2 are POSIX layers implemented on top of Windows.
Use our POSIX `poll(2)` implementation of our poll abstraction.
For mo

cygwin: implement support for cygwin and msys2

Cygwin and MSYS2 are POSIX layers implemented on top of Windows.
Use our POSIX `poll(2)` implementation of our poll abstraction.
For most other components we already have dedicated sources
implementing them in terms of APIs available on Cygwin or
providing non-implementations of components not supported.

This leaves only three components that need Cygwin-specific
implementations:

* uv_uptime: implement using sysinfo
* uv_resident_set_memory: add a placeholder returning UV_ENOSYS
* uv_cpu_info: add a placeholder returning UV_ENOSYS

Update our test suite to account for features not available
due to Cygwin platform limitations or our placeholders.

PR-URL: https://github.com/libuv/libuv/pull/1312
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>

show more ...

build: GNU/kFreeBSD support

autotools support only, gvp does not support kfreebsd detection.

PR-URL: https://github.com/libuv/libuv/pull/960
Reviewed-By: Ben Noordhuis <info@bno

build: GNU/kFreeBSD support

autotools support only, gvp does not support kfreebsd detection.

PR-URL: https://github.com/libuv/libuv/pull/960
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>

show more ...

test,freebsd: skip udp_dual_stack if not supported

By default, FreeBSD has net.inet6.ip6.v6only set to 1 (i.e., no dual stack
support). A new function can_ipv6_ipv4_dual is added to chec

test,freebsd: skip udp_dual_stack if not supported

By default, FreeBSD has net.inet6.ip6.v6only set to 1 (i.e., no dual stack
support). A new function can_ipv6_ipv4_dual is added to check its value and
decide whether `udp_dual_stack` test must be skipped or not.

PR-URL: https://github.com/libuv/libuv/pull/614
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>

show more ...

test: skip ipv6 tests when ipv6 is not supported

To verify on Linux, run `sudo sysctl net.ipv6.conf.all.disable_ipv6=1`
before the test suite.

Fixes: https://github.com/libuv/li

test: skip ipv6 tests when ipv6 is not supported

To verify on Linux, run `sudo sysctl net.ipv6.conf.all.disable_ipv6=1`
before the test suite.

Fixes: https://github.com/libuv/libuv/issues/10
PR-URL: https://github.com/libuv/libuv/pull/92
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>

show more ...

test: skip UDP dualstack test on BSDs

As of right now Linux comes with bindv6only=0 by default but BSDs use
bindv6only=1. It can be changed systemwide with sysctl, but it's not
nice

test: skip UDP dualstack test on BSDs

As of right now Linux comes with bindv6only=0 by default but BSDs use
bindv6only=1. It can be changed systemwide with sysctl, but it's not
nice to depend on the environment for running tests, so disable it just
on BSDs.

show more ...

unix, windows: removed unused status parameter

async, timer, prepare, idle and check handles don't need the status
parameter.

include: merge uv_udp_send and uv_udp_send6

Merge uv_udp_send6() into uv_udp_send(). uv_udp_send() now takes a
const struct sockaddr*.

include: merge uv_udp_bind and uv_udp_bind6

Merge uv_udp_bind6() into uv_udp_bind(). uv_udp_bind() now takes a
const struct sockaddr*.

include: uv_udp_send{6} now takes sockaddr_in*

Passing or returning structs as values makes life hard for people that
work with libuv through a foreign function interface. Switch to a

include: uv_udp_send{6} now takes sockaddr_in*

Passing or returning structs as values makes life hard for people that
work with libuv through a foreign function interface. Switch to a
pointer-based approach.

Fixes #684.

show more ...

include: uv_udp_bind{6} now takes sockaddr_in*

Passing or returning structs as values makes life hard for people that
work with libuv through a foreign function interface. Switch to a

include: uv_udp_bind{6} now takes sockaddr_in*

Passing or returning structs as values makes life hard for people that
work with libuv through a foreign function interface. Switch to a
pointer-based approach.

Fixes #684.

show more ...

include: uv_udp_recv_cb now takes const uv_buf_t*

Passing or returning structs as values makes life hard for people that
work with libuv through a foreign function interface. Switch to a

include: uv_udp_recv_cb now takes const uv_buf_t*

Passing or returning structs as values makes life hard for people that
work with libuv through a foreign function interface. Switch to a
pointer-based approach.

Fixes #684.

show more ...

include: uv_ip[46]_addr now takes sockaddr_in*

Passing or returning structs as values makes life hard for people that
work with libuv through a foreign function interface. Switch to a

include: uv_ip[46]_addr now takes sockaddr_in*

Passing or returning structs as values makes life hard for people that
work with libuv through a foreign function interface. Switch to a
pointer-based approach.

Fixes #684.

show more ...

include: uv_alloc_cb now takes uv_buf_t*

Passing or returning structs as values makes life hard for people that
work with libuv through a foreign function interface. Switch to a
poin

include: uv_alloc_cb now takes uv_buf_t*

Passing or returning structs as values makes life hard for people that
work with libuv through a foreign function interface. Switch to a
pointer-based approach.

Fixes #684.

show more ...

unix, windows: rename uv_run2 to uv_run

This changes the prototype of uv_run() from:

int uv_run(uv_loop_t* loop);

To:

int uv_run(uv_loop_t* loop, uv_run_mode m

unix, windows: rename uv_run2 to uv_run

This changes the prototype of uv_run() from:

int uv_run(uv_loop_t* loop);

To:

int uv_run(uv_loop_t* loop, uv_run_mode mode);

Where `mode` is UV_RUN_DEFAULT, UV_RUN_ONCE or UV_RUN_NOWAIT.

Fixes #683.

show more ...

test: move loop cleanup code to the individual tests

Remove uv_init calls from tests and benchmarks

bring back uv_init

unix: multiplicity

Add UDP support to libuv.