tls: use shared init code for TCP+QUIC

Closes #13172

http_proxy: a blank CURLOPT_USERAGENT should not be used in CONNECT

Extended test 80 to verify this.

Reported-by: Stefan Eissing
Fixes #12680
Closes #12681

lib: introduce struct easy_poll_set for poll information

Connection filter had a `get_select_socks()` method, inspired by the
various `getsocks` functions involved during the lifetime of

lib: introduce struct easy_poll_set for poll information

Connection filter had a `get_select_socks()` method, inspired by the
various `getsocks` functions involved during the lifetime of a
transfer. These, depending on transfer state (CONNECT/DO/DONE/ etc.),
return sockets to monitor and flag if this shall be done for POLLIN
and/or POLLOUT.

Due to this design, sockets and flags could only be added, not
removed. This led to problems in filters like HTTP/2 where flow control
prohibits the sending of data until the peer increases the flow
window. The general transfer loop wants to write, adds POLLOUT, the
socket is writeable but no data can be written.

This leads to cpu busy loops. To prevent that, HTTP/2 did set the
`SEND_HOLD` flag of such a blocked transfer, so the transfer loop cedes
further attempts. This works if only one such filter is involved. If a
HTTP/2 transfer goes through a HTTP/2 proxy, two filters are
setting/clearing this flag and may step on each other's toes.

Connection filters `get_select_socks()` is replaced by
`adjust_pollset()`. They get passed a `struct easy_pollset` that keeps
up to `MAX_SOCKSPEREASYHANDLE` sockets and their `POLLIN|POLLOUT`
flags. This struct is initialized in `multi_getsock()` by calling the
various `getsocks()` implementations based on transfer state, as before.

After protocol handlers/transfer loop have set the sockets and flags
they want, the `easy_pollset` is *always* passed to the filters. Filters
"higher" in the chain are called first, starting at the first
not-yet-connection one. Each filter may add sockets and/or change
flags. When all flags are removed, the socket itself is removed from the
pollset.

Example:

* transfer wants to send, adds POLLOUT
* http/2 filter has a flow control block, removes POLLOUT and adds
POLLIN (it is waiting on a WINDOW_UPDATE from the server)
* TLS filter is connected and changes nothing
* h2-proxy filter also has a flow control block on its tunnel stream,
removes POLLOUT and adds POLLIN also.
* socket filter is connected and changes nothing
* The resulting pollset is then mixed together with all other transfers
and their pollsets, just as before.

Use of `SEND_HOLD` is no longer necessary in the filters.

All filters are adapted for the changed method. The handling in
`multi.c` has been adjusted, but its state handling the the protocol
handlers' `getsocks` method are untouched.

The most affected filters are http/2, ngtcp2, quiche and h2-proxy. TLS
filters needed to be adjusted for the connecting handshake read/write
handling.

No noticeable difference in performance was detected in local scorecard
runs.

Closes #11833

show more ...

http: h1/h2 proxy unification

- use shared code for setting up the CONNECT request
when tunneling, used in HTTP/1.x and HTTP/2 proxying
- eliminate use of Curl_buffer_send() and ot

http: h1/h2 proxy unification

- use shared code for setting up the CONNECT request
when tunneling, used in HTTP/1.x and HTTP/2 proxying
- eliminate use of Curl_buffer_send() and other manipulations
of `data->req` or `data->state.ulbuf`

Closes #11808

show more ...

trace: make tracing available in non-debug builds

Add --trace-config to curl

Add curl_global_trace() to libcurl

Closes #11421

cfilters: rename close/connect functions to avoid clashes

Rename `close` and `connect` in `struct Curl_cftype` for
consistency and to avoid clashes with macros of the same name
(the

cfilters: rename close/connect functions to avoid clashes

Rename `close` and `connect` in `struct Curl_cftype` for
consistency and to avoid clashes with macros of the same name
(the standard AmigaOS networking connect() function is implemented
via a macro).

Closes #11491

show more ...

http_proxy: provide missing arg to infof() call

Pointed out by Coverity

Closes #10904

proxy: http2 proxy tunnel implementation

- currently only on debug build and when env variable
CURL_PROXY_TUNNEL_H2 is present.
- will ALPN negotiate with the proxy server and swit

proxy: http2 proxy tunnel implementation

- currently only on debug build and when env variable
CURL_PROXY_TUNNEL_H2 is present.
- will ALPN negotiate with the proxy server and switch
tunnel filter based on the protocol negotiated.
- http/1.1 tunnel code moved into cf-h1-proxy.[ch]
- http/2 tunnel code implemented in cf-h2-proxy.[ch]
- tunnel start and ALPN set remains in http_proxy.c
- moving all haproxy related code into cf-haproxy.[ch]

VTLS changes
- SSL filters rely solely on the "alpn" specification they
are created with and no longer check conn->bits.tls_enable_alpn.
- checks on which ALPN specification to use (or none at all) are
done in vtls.c when creating the filter.

Testing
- added a nghttpx forward proxy to the pytest setup that
speaks HTTP/2 and forwards all requests to the Apache httpd
forward proxy server.
- extending test coverage in test_10 cases
- adding proxy tests for direct/tunnel h1/h2 use of basic auth.
- adding test for http/1.1 and h2 proxy tunneling to pytest

Closes #10780

show more ...

http_proxy: parse the status line without sscanf

Closes #10602

connections: introduce http/3 happy eyeballs

New cfilter HTTP-CONNECT for h3/h2/http1.1 eyeballing.
- filter is installed when `--http3` in the tool is used (or
the equivalent CURL

connections: introduce http/3 happy eyeballs

New cfilter HTTP-CONNECT for h3/h2/http1.1 eyeballing.
- filter is installed when `--http3` in the tool is used (or
the equivalent CURLOPT_ done in the library)
- starts a QUIC/HTTP/3 connect right away. Should that not
succeed after 100ms (subject to change), a parallel attempt
is started for HTTP/2 and HTTP/1.1 via TCP
- both attempts are subject to IPv6/IPv4 eyeballing, same
as happens for other connections
- tie timeout to the ip-version HAPPY_EYEBALLS_TIMEOUT
- use a `soft` timeout at half the value. When the soft timeout
expires, the HTTPS-CONNECT filter checks if the QUIC filter
has received any data from the server. If not, it will start
the HTTP/2 attempt.

HTTP/3(ngtcp2) improvements.
- setting call_data in all cfilter calls similar to http/2 and vtls filters
for use in callback where no stream data is available.
- returning CURLE_PARTIAL_FILE for prematurely terminated transfers
- enabling pytest test_05 for h3
- shifting functionality to "connect" UDP sockets from ngtcp2
implementation into the udp socket cfilter. Because unconnected
UDP sockets are weird. For example they error when adding to a
pollset.

HTTP/3(quiche) improvements.
- fixed upload bug in quiche implementation, now passes 251 and pytest
- error codes on stream RESET
- improved debug logs
- handling of DRAIN during connect
- limiting pending event queue

HTTP/2 cfilter improvements.
- use LOG_CF macros for dynamic logging in debug build
- fix CURLcode on RST streams to be CURLE_PARTIAL_FILE
- enable pytest test_05 for h2
- fix upload pytests and improve parallel transfer performance.

GOAWAY handling for ngtcp2/quiche
- during connect, when the remote server refuses to accept new connections
and closes immediately (so the local conn goes into DRAIN phase), the
connection is torn down and a another attempt is made after a short grace
period.
This is the behaviour observed with nghttpx when we tell it to shut
down gracefully. Tested in pytest test_03_02.

TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).

- new tests/tests-httpd/scorecard.py for testing h3/h2 protocol implementation.
Invoke:
python3 tests/tests-httpd/scorecard.py --help
for usage.

Improvements on gathering connect statistics and socket access.
- new CF_CTRL_CONN_REPORT_STATS cfilter control for having cfilters
report connection statistics. This is triggered when the connection
has completely connected.
- new void Curl_pgrsTimeWas(..) method to report a timer update with
a timestamp of when it happend. This allows for updating timers
"later", e.g. a connect statistic after full connectivity has been
reached.
- in case of HTTP eyeballing, the previous changes will update
statistics only from the filter chain that "won" the eyeballing.
- new cfilter query CF_QUERY_SOCKET for retrieving the socket used
by a filter chain.
Added methods Curl_conn_cf_get_socket() and Curl_conn_get_socket()
for convenient use of this query.
- Change VTLS backend to query their sub-filters for the socket when
checks during the handshake are made.

HTTP/3 documentation on how https eyeballing works.

TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).

Scorecard with Caddy.
- configure can be run with `--with-test-caddy=path` to specify which caddy to use for testing
- tests/tests-httpd/scorecard.py now measures download speeds with caddy

pytest improvements
- adding Makfile to clean gen dir
- adding nghttpx rundir creation on start
- checking httpd version 2.4.55 for test_05 cases where it is needed. Skipping with message if too old.
- catch exception when checking for caddy existance on system.

Closes #10349

show more ...

curl_log: for failf/infof and debug logging implementations

- new functions and macros for cfilter debugging
- set CURL_DEBUG with names of cfilters where debug logging should be

curl_log: for failf/infof and debug logging implementations

- new functions and macros for cfilter debugging
- set CURL_DEBUG with names of cfilters where debug logging should be
enabled
- use GNUC __attribute__ to enable printf format checks during compile

Closes #10271

show more ...

http_proxy: do not assign data->req.p.http use local copy

Avoid the tricky reusing of the data->req.p.http pointer for http proxy
tunneling.

Fixes #10194
Closes #10234

copyright: update all copyright lines and remove year ranges

- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- save

copyright: update all copyright lines and remove year ranges

- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING

checksrc is updated to allow non-year using copyright statements

Closes #10205

show more ...

lib: connect/h2/h3 refactor

Refactoring of connection setup and happy eyeballing. Move
nghttp2. ngtcp2, quiche and msh3 into connection filters.

- eyeballing cfilter that uses

lib: connect/h2/h3 refactor

Refactoring of connection setup and happy eyeballing. Move
nghttp2. ngtcp2, quiche and msh3 into connection filters.

- eyeballing cfilter that uses sub-filters for performing parallel connects
- socket cfilter for all transport types, including QUIC
- QUIC implementations in cfilter, can now participate in eyeballing
- connection setup is more dynamic in order to adapt to what filter did
really connect. Relevant to see if a SSL filter needs to be added or
if SSL has already been provided
- HTTP/3 test cases similar to HTTP/2
- multiuse of parallel transfers for HTTP/3, tested for ngtcp2 and quiche

- Fix for data attach/detach in VTLS filters that could lead to crashes
during parallel transfers.
- Eliminating setup() methods in cfilters, no longer needed.
- Improving Curl_conn_is_alive() to replace Curl_connalive() and
integrated ssl alive checks into cfilter.
- Adding CF_CNTRL_CONN_INFO_UPDATE to tell filters to update
connection into and persist it at the easy handle.

- Several more cfilter related cleanups and moves:
- stream_weigth and dependency info is now wrapped in struct
Curl_data_priority
- Curl_data_priority members depend is available in HTTP2|HTTP3
- Curl_data_priority members depend on NGHTTP2 support
- handling init/reset/cleanup of priority part of url.c
- data->state.priority same struct, but shallow copy for compares only

- PROTOPT_STREAM has been removed
- Curl_conn_is_mulitplex() now available to check on capability

- Adding query method to connection filters.
- ngtcp2+quiche: implementing query for max concurrent transfers.

- Adding is_alive and keep_alive cfilter methods. Adding DATA_SETUP event.
- setting keepalive timestamp on connect
- DATA_SETUP is called after the connection has been completely
setup (but may not connected yet) to allow filters to initialize
data members they use.

- there is no socket to be had with msh3, it is unclear how select
shall work

- manual test via "curl --http3 https://curl.se" fail with "empty
reply from server".

- Various socket/conn related cleanups:
- Curl_socket is now Curl_socket_open and in cf-socket.c
- Curl_closesocket is now Curl_socket_close and in cf-socket.c
- Curl_ssl_use has been replaced with Cur_conn_is_ssl
- Curl_conn_tcp_accepted_set has been split into
Curl_conn_tcp_listen_set and Curl_conn_tcp_accepted_set
with a clearer purpose

Closes #10141

show more ...

haxproxy: send before TLS handhshake

- reverse order of haproxy and final ssl cfilter

- make haproxy avaiable on PROXY builds, independent of HTTP support as
it can be used wi

haxproxy: send before TLS handhshake

- reverse order of haproxy and final ssl cfilter

- make haproxy avaiable on PROXY builds, independent of HTTP support as
it can be used with any protocol.

Reported-by: Sergio-IME on github
Fixes #10165
Closes #10167

show more ...

tls: backends use connection filters for IO, enabling HTTPS-proxy

- OpenSSL (and compatible)
- BearSSL
- gnutls
- mbedtls
- rustls
- schannel
- secure-transpor

tls: backends use connection filters for IO, enabling HTTPS-proxy

- OpenSSL (and compatible)
- BearSSL
- gnutls
- mbedtls
- rustls
- schannel
- secure-transport
- wolfSSL (v5.0.0 and newer)

This leaves only the following without HTTPS-proxy support:
- gskit
- nss
- wolfSSL (versions earlier than v5.0.0)

Closes #9962

show more ...

cfilter: re-add `conn` as parameter to cfilter setup methods

- `Curl_ssl_get_config()` now returns the first config if no SSL proxy
filter is active

- socket filter starts con

cfilter: re-add `conn` as parameter to cfilter setup methods

- `Curl_ssl_get_config()` now returns the first config if no SSL proxy
filter is active

- socket filter starts connection only on first invocation of its
connect method

Fixes #9982
Closes #9983

show more ...

lib: rewind BEFORE request instead of AFTER previous

This makes a big difference for cases when the rewind is not actually
necessary to perofm (for example HTTP response code 301 convert

lib: rewind BEFORE request instead of AFTER previous

This makes a big difference for cases when the rewind is not actually
necessary to perofm (for example HTTP response code 301 converts to GET)
and therefore the rewind can be avoided. In particular for situations
when that rewind fails, for example when reading from a pipe or similar.

Reported-by: Ali Utku Selen

Fixes #9735
Closes #9958

show more ...

vtls: localization of state data in filters

- almost all backend calls pass the Curl_cfilter intance instead of
connectdata+sockindex
- ssl_connect_data is remove from struct co

vtls: localization of state data in filters

- almost all backend calls pass the Curl_cfilter intance instead of
connectdata+sockindex
- ssl_connect_data is remove from struct connectdata and made internal
to vtls
- ssl_connect_data is allocated in the added filter, kept at cf->ctx

- added function to let a ssl filter access its ssl_primary_config and
ssl_config_data this selects the propert subfields in conn and data,
for filters added as plain or proxy
- adjusted all backends to use the changed api
- adjusted all backends to access config data via the exposed
functions, no longer using conn or data directly

cfilter renames for clear purpose:

- methods `Curl_conn_*(data, conn, sockindex)` work on the complete
filter chain at `sockindex` and connection `conn`.
- methods `Curl_cf_*(cf, ...)` work on a specific Curl_cfilter
instance.
- methods `Curl_conn_cf()` work on/with filter instances at a
connection.
- rebased and resolved some naming conflicts
- hostname validation (und session lookup) on SECONDARY use the same
name as on FIRST (again).

new debug macros and removing connectdata from function signatures where not
needed.

adapting schannel for new Curl_read_plain paramter.

Closes #9919

show more ...

cfiler: filter types have flags indicating what they do

- Adding Curl_conn_is_ip_connected() to check if network connectivity
has been reached

- having ftp wait for network co

cfiler: filter types have flags indicating what they do

- Adding Curl_conn_is_ip_connected() to check if network connectivity
has been reached

- having ftp wait for network connectivity before proceeding with
transfers.

Fixes test failures 1631 and 1632 with hyper.

Closes #9952

show more ...

proxy: haproxy filter is only available when PROXY and HTTP are

Closes #9935

proxy: refactor haproxy protocol handling as connection filter

Closes #9893

lib: connection filters (cfilter) addition to curl:

- general construct/destroy in connectdata
- default implementations of callback functions
- connect: cfilters for connect and

lib: connection filters (cfilter) addition to curl:

- general construct/destroy in connectdata
- default implementations of callback functions
- connect: cfilters for connect and accept
- socks: cfilter for socks proxying
- http_proxy: cfilter for http proxy tunneling
- vtls: cfilters for primary and proxy ssl
- change in general handling of data/conn
- Curl_cfilter_setup() sets up filter chain based on data settings,
if none are installed by the protocol handler setup
- Curl_cfilter_connect() boot straps filters into `connected` status,
used by handlers and multi to reach further stages
- Curl_cfilter_is_connected() to check if a conn is connected,
e.g. all filters have done their work
- Curl_cfilter_get_select_socks() gets the sockets and READ/WRITE
indicators for multi select to work
- Curl_cfilter_data_pending() asks filters if the have incoming
data pending for recv
- Curl_cfilter_recv()/Curl_cfilter_send are the general callbacks
installed in conn->recv/conn->send for io handling
- Curl_cfilter_attach_data()/Curl_cfilter_detach_data() inform filters
and addition/removal of a `data` from their connection
- adding vtl functions to prevent use of Curl_ssl globals directly
in other parts of the code.

Reviewed-by: Daniel Stenberg
Closes #9855

show more ...

misc: typo and grammar fixes

- Replace `Github` with `GitHub`.
- Replace `windows` with `Windows`
- Replace `advice` with `advise` where a verb is used.
- A few fixes on removing

misc: typo and grammar fixes

- Replace `Github` with `GitHub`.
- Replace `windows` with `Windows`
- Replace `advice` with `advise` where a verb is used.
- A few fixes on removing repeated words.
- Replace `a HTTP` with `an HTTP`

Closes #9802

show more ...

http_proxy: restore the protocol pointer on error

Reported-by: Trail of Bits

Closes #9790