Fix phpGH-10648: add check function pointer into mbfl_encoding

Previously, mbstring used the same logic for encoding validation as for
encoding conversion.

However, there are ca

Fix phpGH-10648: add check function pointer into mbfl_encoding

Previously, mbstring used the same logic for encoding validation as for
encoding conversion.

However, there are cases where we want to use different logic for validation
and conversion. For example, if a string ends up with missing input
required by the encoding, or if a character is input that is invalid
as an encoding but can be converted, the conversion should succeed and
the validation should fail.

To achieve this, a function pointer mb_check_fn has been added to
struct mbfl_encoding to implement the logic used for validation.
Also, added implementation of validation logic for UTF-7, UTF7-IMAP,
ISO-2022-JP and JIS.

(The same change has already been made to PHP 8.2 and 8.3; see
6fc8d014df. This commit is backporting the change to PHP 8.1.)

show more ...

In legacy text conversion filters, reset filter state in 'flush' function

Up until now, I believed that mbstring had been designed such
that (legacy) text conversion filter objects shoul

In legacy text conversion filters, reset filter state in 'flush' function

Up until now, I believed that mbstring had been designed such
that (legacy) text conversion filter objects should not be
re-used after the 'flush' function is called to complete a
text conversion operation.

However, it turns out that the implementation of
_php_mb_encoding_handler_ex DID re-use filter objects
after flush. That means that functions which were based on
_php_mb_encoding_handler_ex, including mb_parse_str and
php_mb_post_handler, would break in some cases; state left
over from converting one substring (perhaps a variable name)
would affect the results of converting another substring
(perhaps the value of the same variable), and could cause
extraneous characters to get inserted into the output.

All this code should be deleted soon, but fixing it helps me
to avoid spurious failures when fuzzing the new/old code to
look for differences in behavior.

(This bug fix commit was originally applied to PHP-8.2 when fuzzing
the new mbstring text conversion code to check for differences with
the old code. Later, Kentaro Ohkouchi kindly reported a problem with
mb_encode_mimeheader under PHP 8.1 which was caused by the same issue.
Hence, this commit was backported to PHP-8.1.)

Fixes GH-9683.

show more ...

mbstring no longer provides 'long' substitutions for erroneous input bytes

Previously, mbstring had a special mode whereby it would convert
erroneous input byte sequences to output like

mbstring no longer provides 'long' substitutions for erroneous input bytes

Previously, mbstring had a special mode whereby it would convert
erroneous input byte sequences to output like "BAD+XXXX", where "XXXX"
would be the erroneous bytes expressed in hexadecimal. This mode could
be enabled by calling `mb_substitute_character("long")`.

However, accurately reproducing input byte sequences from the cached
state of a conversion filter is often tricky, and this significantly
complicates the implementation. Further, the means used for passing
the erroneous bytes through to where the "BAD+XXXX" text is generated
only allows for up to 3 bytes to be passed, meaning that some erroneous
byte sequences are truncated anyways.

More to the point, a search of publically available PHP code indicates
that nobody is really using this feature anyways.

Incidentally, this feature also provided error output like "JIS+XXXX"
if the input 'should have' represented a JISX 0208 codepoint, but it
decodes to a codepoint which does not exist in the JISX 0208 charset.
Similarly, specific error output was provided for non-existent
JISX 0212 codepoints, and likewise for JISX 0213, CP932, and a few
other charsets. All of that is now consigned to the flames.

However, "long" error markers also include a somewhat more useful
"U+XXXX" marker for Unicode codepoints which were successfully
decoded from the input text, but cannot be represented in the output
encoding. Those are still supported.

With this change, there is no need to use a variety of special values
in the high bits of a wchar to represent different types of error
values. We can (and will) just use a single error value. This will be
equal to -1.

One complicating factor: Text conversion functions return an integer to
indicate whether the conversion operation should be immediately
aborted, and the magic 'abort' marker is -1. Also, almost all of these
functions would return the received byte/codepoint to indicate success.
That doesn't work with the new error value; if an input filter detects
an error and passes -1 to the output filter, and the output filter
returns it back, that would be taken to mean 'abort'.

Therefore, amend all these functions to return 0 for success.

show more ...

Fix conversion of HZ text (and add test suite)

- Treat truncated multi-byte characters as an error.
- Don't allow ASCII control characters to appear in the middle of a
multi-byte c

Fix conversion of HZ text (and add test suite)

- Treat truncated multi-byte characters as an error.
- Don't allow ASCII control characters to appear in the middle of a
multi-byte character.
- Handle ~ escapes according to the HZ standard (RFC 1843).
- Treat unrecognized ~ escapes as an error.
- Multi-byte characters (between ~{ ~} escapes) are GB2312, not CP936.
(CP936 is an extended version from MicroSoft, but the RFC does not
state that this extended version of GB should be used.)

show more ...

Remove useless constant MBFL_ENCTYPE_MBCS

This flag indicated that an encoding was 'multi-byte'; it can use a variable
number of bytes to encode each character. As it turns out, we don't

Remove useless constant MBFL_ENCTYPE_MBCS

This flag indicated that an encoding was 'multi-byte'; it can use a variable
number of bytes to encode each character. As it turns out, we don't actually
need to check this flag anywhere, so it's better to remove it.

show more ...

Remove mbstring identify filters

mbstring had an 'identify filter' for almost every supported text encoding
which was used when auto-detecting the most likely encoding for a string.

Remove mbstring identify filters

mbstring had an 'identify filter' for almost every supported text encoding
which was used when auto-detecting the most likely encoding for a string.
It would run over the string and set a 'flag' if it saw anything which
did not appear likely to be the encoding in question.

One problem with this scheme was that encodings which merely appeared
less likely to be the correct one were completely rejected, even if there
was no better candidate. Another problem was that the 'identify filters'
had a huge amount of code duplication with the 'conversion filters'.

Eliminate the identify filters. Instead, when auto-detecting text
encoding, use conversion filters to see whether the input string is valid
in candidate encodings or not. At the same type, watch the type of
codepoints which the string decodes to and mark it as less likely if
non-printable characters (ESC, form feed, bell, etc.) or 'private use
area' codepoints are seen.

Interestingly, one old test case in which JIS text was misidentified
as UTF-8 (and this wrong behavior was enshrined in the test) was 'fixed'
and the JIS string is now auto-detected as JIS.

show more ...

Remove unneeded function mbfl_filt_ident_common_dtor

This was the default destructor for mbfl_identify_filter structs, but there's nothing
we actually need to do to those structs before

Remove unneeded function mbfl_filt_ident_common_dtor

This was the default destructor for mbfl_identify_filter structs, but there's nothing
we actually need to do to those structs before freeing them.

show more ...

Remove unneeded function mbfl_filt_conv_common_dtor

This is a default destructor for mbfl_convert_filter structs. The thing is: there
isn't really anything that needs to be done to those

Remove unneeded function mbfl_filt_conv_common_dtor

This is a default destructor for mbfl_convert_filter structs. The thing is: there
isn't really anything that needs to be done to those structs before freeing them.
The default destructor just zeroed out some fields, but there's no reason why
we should actually do that.

show more ...

Comment constants in mbfl_consts.h, remove unused ones

These were unused, and almost certainly will never be used:

- MBFL_ENCTYPE_MWC4BE
- MBFL_ENCTYPE_MWC4LE
- MBFL_ENCTYPE

Comment constants in mbfl_consts.h, remove unused ones

These were unused, and almost certainly will never be used:

- MBFL_ENCTYPE_MWC4BE
- MBFL_ENCTYPE_MWC4LE
- MBFL_ENCTYPE_SHFTCODE
- MBFL_ENCTYPE_ENC_STRM

For the latter two, there were some encodings which were marked with these flags;
but nothing ever _checked_ these particular flags.

show more ...

Remove redundant includes from mbstring (and make sure correct config.h is used)

Very interesting... it turns out that when Valgrind support was enabled,
`#include "config.h"` from withi

Remove redundant includes from mbstring (and make sure correct config.h is used)

Very interesting... it turns out that when Valgrind support was enabled,
`#include "config.h"` from within mbstring was actually including the file "config.h"
from Valgrind, and not the one from mbstring!!

This is because -I/usr/include/valgrind was added to the compiler invocation _before_
-Iext/mbstring/libmbfl.

Make sure we actually include the file which was intended.

show more ...

Fix [-Wmissing-field-initializers] compiler warning in mbstring

Add missing NULL pointer for mbfl_convert_vtbl struct.

Don't short-circuit MBFL_OUTPUTFILTER_ILLEGAL_MODE_NONE

Make sure we always go through mbfl_filt_conv_illegal_output(), so
that the number of illegal characters gets counted.

Remove local variables

This patch removes the so called local variables defined per
file basis for certain editors to properly show tab width, and
similar settings. These are mainly

Remove local variables

This patch removes the so called local variables defined per
file basis for certain editors to properly show tab width, and
similar settings. These are mainly used by Vim and Emacs editors
yet with recent changes the once working definitions don't work
anymore in Vim without custom plugins or additional configuration.
Neither are these settings synced across the PHP code base.

A simpler and better approach is EditorConfig and fixing code
using some code style fixing tools in the future instead.

This patch also removes the so called modelines for Vim. Modelines
allow Vim editor specifically to set some editor configuration such as
syntax highlighting, indentation style and tab width to be set in the
first line or the last 5 lines per file basis. Since the php test
files have syntax highlighting already set in most editors properly and
EditorConfig takes care of the indentation settings, this patch removes
these as well for the Vim 6.0 and newer versions.

With the removal of local variables for certain editors such as
Emacs and Vim, the footer is also probably not needed anymore when
creating extensions using ext_skel.php script.

Additionally, Vim modelines for setting php syntax and some editor
settings has been removed from some *.phpt files. All these are
mostly not relevant for phpt files neither work properly in the
middle of the file.

show more ...

Store input and output filters in mbfl encodings

For functions like mb_chr() and mb_ord() just looking up the
input/output filter for the encoding dominates the runtime. This
commit

Store input and output filters in mbfl encodings

For functions like mb_chr() and mb_ord() just looking up the
input/output filter for the encoding dominates the runtime. This
commit stores the input/output filter for an encoding in the
mbfl encoding structure, so it can be looked up directly, rather
than scanning through filter function lists.

show more ...

trailing whitespace removal

updated libmbfl to 1.3.2 (JISX-0213:2004 support).

reduced memory footprint for codepages.

* Refactor zend_multibyte facility.
Now mbstring.script_encoding is superseded by zend.script_encoding.

@mbfilter is changed to bundled version of libmbfl to prevent LGPL licence problem. mbregex is changed to oniguruma.