Add first-class callables

Support acquiring a Closure to a callable using the syntax
func(...), $obj->method(...), etc. This is essentially a
shortcut for Closure::fromCallable().

Add first-class callables

Support acquiring a Closure to a callable using the syntax
func(...), $obj->method(...), etc. This is essentially a
shortcut for Closure::fromCallable().

RFC: https://wiki.php.net/rfc/first_class_callable_syntax

Closes GH-7019.

Co-Authored-By: Nikita Popov <nikita.ppv@gmail.com>

show more ...

Disable "red zone" usage (it leads to crashes).

Use "red zone" for HYBRID VM.
Support for CALL VM and VM without global register variables.

Initial support of JIT/arm64

SUMMARY

We implemented a prototype of PHP JIT/arm64. Briefly speaking,

1. build system
Changes to the build system are made so that PHP JIT

Initial support of JIT/arm64

SUMMARY

We implemented a prototype of PHP JIT/arm64. Briefly speaking,

1. build system
Changes to the build system are made so that PHP JIT can be successfully
built and run on ARM-based machine.
Major change lies in file zend_jit_arm64.dasc, where the handler for
each opcode is generated into machine code. Note that this file is just
copied from zend_jit_x86.dasc and the *unimplemented* parts are
substitued with 'brk' instruction for future work.

2. registers
AArch64 registers are defined in file zend_jit_arm64.h. From our
perspectives, the register usage is quite different from the x86
implementation due to the different ABI, number of registers and
addressing modes.
We had many confusions on this part, and will discuss it in details in
the final section.

3. opcodes
Several opcodes are partially supported, including INIT_FCALL, DO_UCALL,
DO_ICALL, RETURN, ADD, PRE_INC, JMP, QM_ASSIGN, etc. Hence, simple use
scenarios such as user function call, loops, addition with integer and
floating point numbers can be supported.
18 micro test cases are added under 'ext/opcache/tests/jit/arm64/'. Note
that majority of these test cases are design for functional JIT, and
cases 'hot_func_*.phpt' and 'loop_002.phpt' can trigger tracing JIT.

4. test
Our local test environment is an ARM-based server with Ubuntu 20.04 and
GCC-10. Note that both HYBRID and CALL VM modes are supported. We
suggest running the JIT test cases using the following command. Out of
all 130 test cases, 66 cases can be passed currently.
```
$ make test TESTS='-d opcache.jit=1203 ext/opcache/tests/jit/'
```

DETAILS

1. I-cache flush
Instruction cache must be flushed for the JIT-ed code on AArch64. See
macro JIT_CACHE_FLUSH in file 'zend_jit_internal.h'.

2. Disassembler
Add initialization and jump target parse operations for AArch64 backed.
See the updates in file 'zend_jit_disasm.c'.

3. redzone
Enable redzone for AArch64. See the update in zend_vm_opcodes.h.
Redzone is designated to prevent 'vm_stack_data' from being optimized
out by compilers. It's worth noting that this 16-byte redzone might be
reused as temporary use(treated as extra stack space) for HYBRID mode.

4. stack space reservation
The definitions of HYBRID_SPAD, SPAD and NR_SPAD are a bit tricky for
x86/64.
In AArch64, HYBRID_SPAD and SPAD are both defined as 16. These 16 bytes
are pre-allocated for tempoerary usage along the exuection of JIT-ed
code. Take line 4185 in file zend_jit_arm64.dasc as an example. NR_SPAD
is defined as 48, out of which 32 bytes to save FP/IP/LR registers.
Note that we choose to always reserve HYBRID_SPAD bytes in HYBRID mode,
no matter whether redzone is used or not, for the sake of safety.

5. stack alignment
In AArch64 the stack pointer should be 16-byte aligned. Since shadow
stack is used for JIT, it's easy to guarantee the stack alignment, via
simply moving SP with an offset like 16 or a multiple of 16. That's why
NR_SPAD is defined as 48 and we use 32 of them to save FP/IP/LR
registers which only occupies 24 bytes.

6. global registers
x27 and x28 are reserved as global registers. See the updates in file
zend_jit_vm_helpers.c

7. function prologue for CALL mode
Two callee-saved registers x27 and x28 should saved in function
zend_jit_prologue() in file zend_jit_arm64.dasc. Besides the LR, i.e.
x30, should also be saved since runtime C helper functions(such as
zend_jit_find_func_helper) might be invoked along the execution of
JIT-ed code.

8. regset
Minor changes are done to regset operations particularly for AArch64.
See the updates in file zend_jit_internal.h.

REGISTER USAGE

In this section, we will first talk about our understanding on register
usage and then demonstrate our design.

1. Register usage for HYBRID/CALL modes
Registers are used similarly between HYBRID mode and CALL mode.

One difference is how FP and IP are saved. In HYBRID mode, they are
assigned to global registers, while in CALL mode they are saved/restored
on the VM stack explicitly in prologue/epilogue.

The other difference is that LR register should also be saved/restored
in CALL mode since JIT-ed code are invoked as normal functions.

2. Register usage for functional/tracing JIT
The way registers are used differs a lot between functional JIT and
tracing JIT.

For functional JIT, runtime C code (e.g. helper functions) would be
invoked along the execution of JIT-ed code. As the operands for *most*
opcodes are accessed via the stack slot, i.e. FP + offset. Hence there
is no need to save/restore local(caller-saved) registers before/after
invoking runtime C code.
Exception lies in Phi node and registers might be allocated for these
nodes. Currently I don't fully understand the reason, why registers are
allocated for Phi functions, because I suppose for different versions of
SSA variables at the Phi function, their postions on the stack slot
should be identical(in other words, access via the stack slot is enough
and there is no need to allocate registers).

For tracing JIT, runtime information are recorded for traces(before the
JIT compilation), and the data types and control flows are concrete as
well. Hence it's would be faster to conduct operations and computations
via registers rather than stack slots(as functional JIT does) for these
collected hot paths. Besides, runtime C code can be invoked for tracing
JIT, however this only happends for deoptimization and all registers are
saved to stack in advance.

3. Candidates for register allocator
1) opcode candidates
Function zend_jit_opline_supports_reg() determines the candidate opcodes
which can use CPU registers.

2) register candidates
Registers in set "ZEND_REGSET_FP + ZEND_REGSET_GP - ZEND_REGSET_FIXED -
ZEND_REGSET_PRESERVED" are available for register allocator.
Note that registers from ZEND_REGSET_FIXED are reserved for special
purpose, such as the stack pointer, and they are excluded from register
allocation process.
Note that registers from ZEND_REGSET_PRESERVED are callee-saved based on
the ABI and it's safe to not use them either.

4. Temporary registers
Temporary registers are needed by some opcodes to save intermediate
computation results.

1) Functions zend_jit_get_def_scratch_regset() and
zend_jit_get_scratch_regset() return which registers might be clobbered
by some opcodes. Hence register allocator would spill these scratch
registers if necessary when encountering these opcodes.

2) Macro ZEND_REGSET_LOW_PRIORITY denotes a set of registers which would
be allocated with low priority, and these registers can be used as
temporary usage to avoid conflicts to its best.

5. Compared to the x86 implementation, in JIT/arm64
1) Called-saved FP registers are included into ZEND_REGSET_PRESERVED for
AArch64.

2) We follow the logic of function zend_jit_opline_supports_reg().

3) We reserve 4 GPRs and 2 FPRs out from register allocator and use them
as temporary registers in particular. Note that these 6 registers are
included in set ZEND_REGSET_FIXED.
Since they are reserved, may-clobbered registers can be removed for most
opcodes except for function calls. Besides, low-priority registers are
defined as empty since all candidate registers are of the same priority.
See the updates in function zend_jit_get_scratch_regset() and macro
ZEND_REGSET_LOW_PRIORITY.

6. Why we reserve registers for temporary usage?
1) Addressing mode in AArch64 needs more temporary registers.
The addressing mode is different from x86 and tempory registers might be
*always* needed for most opcodes. For instance, an immediate must be
first moved into one register before storing into memory in AArch64,
whereas in x86 this immediate can be stored directly.

2) There are more registers in AArch64.
Compared to the solution in JIT/x86(that is, temporary registers are
reserved on demand, i.e. different registers for different opcodes under
different conditions), our solution seems a coarse-granularity and
brute-force solution, and the execution performance might be downgraded
to some extent since the number of candidate registers used for
allocation becomes less.
We suppose the performance loss might be acceptable since there are more
registers in AArch64.

3) Based on my understanding, scratch registers defined in x86 are
excluded from candidates for register allocator with *low possibility*,
and it can still allocate these registers. Special handling should be
conducted, such as checking 'reg != ZREG_R0'.
Hence, as we see it, it's simpler to reserve some temporary registers
exclusively. See the updates in function zend_jit_math_long_long() for
instance. TMP1 can be used directly without checking.

Co-Developed-by: Nick Gasson <Nick.Gasson@arm.com>

show more ...

Implement never return type

The never type can be used to indicate that a function never
returns, for example because it always unwinds.

RFC: https://wiki.php.net/rfc/noreturn_t

Implement never return type

The never type can be used to indicate that a function never
returns, for example because it always unwinds.

RFC: https://wiki.php.net/rfc/noreturn_type

Closes GH-6761.

show more ...

Add zend_get_opcode_id() to get opcode id from name

Restrict allowed usages of $GLOBALS

This restricts allowed usage of $GLOBALS, with the effect that
plain PHP arrays can no longer contain INDIRECT elements.

RFC: https://wiki.ph

Restrict allowed usages of $GLOBALS

This restricts allowed usage of $GLOBALS, with the effect that
plain PHP arrays can no longer contain INDIRECT elements.

RFC: https://wiki.php.net/rfc/restrict_globals_usage

Closes GH-6487.

show more ...

Disable stack reuse optimization for x86 PIC code. It may clobber local variable used for Global Offset Table.

Preallocate stack space for JIT in execute_ex() to eliminate JIT prologue/epilogue.

Implement named parameters

From an engine perspective, named parameters mainly add three
concepts:

* The SEND_* opcodes now accept a CONST op2, which is the
argument nam

Implement named parameters

From an engine perspective, named parameters mainly add three
concepts:

* The SEND_* opcodes now accept a CONST op2, which is the
argument name. For now, it is looked up by linear scan and
runtime cached.
* This may leave UNDEF arguments on the stack. To avoid having
to deal with them in other places, a CHECK_UNDEF_ARGS opcode
is used to either replace them with defaults, or error.
* For variadic functions, EX(extra_named_params) are collected
and need to be freed based on ZEND_CALL_HAS_EXTRA_NAMED_PARAMS.

RFC: https://wiki.php.net/rfc/named_params

Closes GH-5357.

show more ...

Implement nullsafe ?-> operator

RFC: https://wiki.php.net/rfc/nullsafe_operator

Closes GH-5619.

Co-authored-by: Nikita Popov <nikita.ppv@gmail.com>

Implement match expression

RFC: https://wiki.php.net/rfc/match_expression_v2

Closes GH-5371.

Throw Error when writing property of non-object

This removes object auto-vivification support.

This also means that we can remove the corresponding special
handling for typed pr

Throw Error when writing property of non-object

This removes object auto-vivification support.

This also means that we can remove the corresponding special
handling for typed properites: We no longer need to check that a
property is convertible to stdClass if such a conversion might
take place indirectly due to a nested property write.

Additionally OBJ_W style operations now no longer modify the
object operand, and as such we no longer need to treat op1 as a
def in SSA form.

The next step would be to actually compile the whole LHS of OBJ_W
operations in R rather than W mode, but that causes issues with
SimpleXML, whose object handlers depend on the current compilation
structure.

Part of https://wiki.php.net/rfc/engine_warnings.

show more ...

Replace ZEND_ASSIGN_ADD (and others) by ZEND_ASSIGN_OP, ZEND_ASSIGN_DIM_OP, ZEND_ASSGIN_OBJ_OP and ZEND_ASSIGN_STATIC_PROP_OP

Improve zend_binary_assign_op helpers.
Reorder opcode numbers to make ADD-POW and ASSIGN_ADD-ASSIGN_POW opcodes sequencional.

Optimization of INC/DEC helpers

Register class before fetching parent

We want the class declaration to be available while compiling the
parent class.

Implement spread operator in arrays

RFC: https://wiki.php.net/rfc/spread_operator_for_array

Closes GH-3640.

Adios, yearly copyright ranges

Implement ??= operator

RFC: https://wiki.php.net/rfc/null_coalesce_equal_operator

$a ??= $b is $a ?? ($a = $b), with the difference that $a is only
evaluated once, to the degree

Implement ??= operator

RFC: https://wiki.php.net/rfc/null_coalesce_equal_operator

$a ??= $b is $a ?? ($a = $b), with the difference that $a is only
evaluated once, to the degree that this is possible. In particular
in $a[foo()] ?? $b function foo() is only ever called once.
However, the variable access themselves will be reevaluated.

show more ...

Implement typed properties

RFC: https://wiki.php.net/rfc/typed_properties_v2

This is a squash of PR #3734, which is a squash of PR #3313.

Co-authored-by: Bob Weinand <bobwe

Implement typed properties

RFC: https://wiki.php.net/rfc/typed_properties_v2

This is a squash of PR #3734, which is a squash of PR #3313.

Co-authored-by: Bob Weinand <bobwei9@hotmail.com>
Co-authored-by: Joe Watkins <krakjoe@php.net>
Co-authored-by: Dmitry Stogov <dmitry@zend.com>

show more ...

Implement ZEND_ARRAY_KEY_EXISTS opcode to speed up array_key_exists()

Update email addresses. We're still @Zend, but future proofing it...

Keep information about unresolved interfaces in zend_class_entry->interface_names.
Move interface implementation code into ZEND_DECLARE_*CLASS opcodes.
Remove ZEND_ADD_INTERFACE and ZEND_VER

Keep information about unresolved interfaces in zend_class_entry->interface_names.
Move interface implementation code into ZEND_DECLARE_*CLASS opcodes.
Remove ZEND_ADD_INTERFACE and ZEND_VERIFY_ABSTRACT_CLASS opcodes.

show more ...

Replace zend_class_entry->traits by persistent zend_class_entry->trait_names.
Move trait binding code into ZEND_DECLARE_*CLASS opcodes.
Remove ZEND_ADD_TRIAIT and ZEND_BIND_TRAITS opcodes.