1 2 #include <php_compat.h> 3 4 #ifdef PHP_WIN32 5 # include <config.w32.h> 6 #else 7 # include <php_config.h> 8 #endif 9 10 #undef PACKAGE_NAME 11 #undef PACKAGE_VERSION 12 #undef PACKAGE_TARNAME 13 #undef PACKAGE_STRING 14 15 #define SUPPORT_UCP 16 #define SUPPORT_UTF8 17 18 #if defined(__GNUC__) && __GNUC__ >= 4 19 # ifdef __cplusplus 20 # define PCRE_EXP_DECL extern "C" __attribute__ ((visibility("default"))) 21 # else 22 # define PCRE_EXP_DECL extern __attribute__ ((visibility("default"))) 23 # endif 24 # define PCRE_EXP_DEFN __attribute__ ((visibility("default"))) 25 # define PCRE_EXP_DATA_DEFN __attribute__ ((visibility("default"))) 26 #endif 27 28 29 /* Exclude these below definitions when building within PHP */ 30 #ifndef ZEND_API 31 32 /* config.h. Generated from config.h.in by configure. */ 33 /* config.h.in. Generated from configure.ac by autoheader. */ 34 35 36 /* PCRE is written in Standard C, but there are a few non-standard things it 37 can cope with, allowing it to run on SunOS4 and other "close to standard" 38 systems. 39 40 In environments that support the facilities, config.h.in is converted by 41 "configure", or config-cmake.h.in is converted by CMake, into config.h. If you 42 are going to build PCRE "by hand" without using "configure" or CMake, you 43 should copy the distributed config.h.generic to config.h, and then edit the 44 macro definitions to be the way you need them. You must then add 45 -DHAVE_CONFIG_H to all of your compile commands, so that config.h is included 46 at the start of every source. 47 48 Alternatively, you can avoid editing by using -D on the compiler command line 49 to set the macro values. In this case, you do not have to set -DHAVE_CONFIG_H. 50 51 PCRE uses memmove() if HAVE_MEMMOVE is set to 1; otherwise it uses bcopy() if 52 HAVE_BCOPY is set to 1. If your system has neither bcopy() nor memmove(), set 53 them both to 0; an emulation function will be used. */ 54 55 /* By default, the \R escape sequence matches any Unicode line ending 56 character or sequence of characters. If BSR_ANYCRLF is defined (to any 57 value), this is changed so that backslash-R matches only CR, LF, or CRLF. 58 The build-time default can be overridden by the user of PCRE at runtime. */ 59 #undef BSR_ANYCRLF 60 61 /* If you are compiling for a system that uses EBCDIC instead of ASCII 62 character codes, define this macro to any value. You must also edit the 63 NEWLINE macro below to set a suitable EBCDIC newline, commonly 21 (0x15). 64 On systems that can use "configure" or CMake to set EBCDIC, NEWLINE is 65 automatically adjusted. When EBCDIC is set, PCRE assumes that all input 66 strings are in EBCDIC. If you do not define this macro, PCRE will assume 67 input strings are ASCII or UTF-8/16/32 Unicode. It is not possible to build 68 a version of PCRE that supports both EBCDIC and UTF-8/16/32. */ 69 #undef EBCDIC 70 71 /* In an EBCDIC environment, define this macro to any value to arrange for the 72 NL character to be 0x25 instead of the default 0x15. NL plays the role that 73 LF does in an ASCII/Unicode environment. The value must also be set in the 74 NEWLINE macro below. On systems that can use "configure" or CMake to set 75 EBCDIC_NL25, the adjustment of NEWLINE is automatic. */ 76 #undef EBCDIC_NL25 77 78 /* Define to 1 if you have the `bcopy' function. */ 79 #ifndef HAVE_BCOPY 80 #define HAVE_BCOPY 1 81 #endif 82 83 /* Define to 1 if you have the <bits/type_traits.h> header file. */ 84 /* #undef HAVE_BITS_TYPE_TRAITS_H */ 85 86 /* Define to 1 if you have the <bzlib.h> header file. */ 87 #ifndef HAVE_BZLIB_H 88 #define HAVE_BZLIB_H 1 89 #endif 90 91 /* Define to 1 if you have the <dirent.h> header file. */ 92 #ifndef HAVE_DIRENT_H 93 #define HAVE_DIRENT_H 1 94 #endif 95 96 /* Define to 1 if you have the <dlfcn.h> header file. */ 97 #ifndef HAVE_DLFCN_H 98 #define HAVE_DLFCN_H 1 99 #endif 100 101 /* Define to 1 if you have the <editline/readline.h> header file. */ 102 /*#undef HAVE_EDITLINE_READLINE_H*/ 103 104 /* Define to 1 if you have the <edit/readline/readline.h> header file. */ 105 /* #undef HAVE_EDIT_READLINE_READLINE_H */ 106 107 /* Define to 1 if you have the <inttypes.h> header file. */ 108 #ifndef HAVE_INTTYPES_H 109 #define HAVE_INTTYPES_H 1 110 #endif 111 112 /* Define to 1 if you have the <limits.h> header file. */ 113 #ifndef HAVE_LIMITS_H 114 #define HAVE_LIMITS_H 1 115 #endif 116 117 /* Define to 1 if the system has the type `long long'. */ 118 #ifndef HAVE_LONG_LONG 119 #define HAVE_LONG_LONG 1 120 #endif 121 122 /* Define to 1 if you have the `memmove' function. */ 123 #ifndef HAVE_MEMMOVE 124 #define HAVE_MEMMOVE 1 125 #endif 126 127 /* Define to 1 if you have the <memory.h> header file. */ 128 #ifndef HAVE_MEMORY_H 129 #define HAVE_MEMORY_H 1 130 #endif 131 132 /* Define if you have POSIX threads libraries and header files. */ 133 #undef HAVE_PTHREAD 134 135 /* Have PTHREAD_PRIO_INHERIT. */ 136 #undef HAVE_PTHREAD_PRIO_INHERIT 137 /* Define to 1 if you have the <readline/history.h> header file. */ 138 #ifndef HAVE_READLINE_HISTORY_H 139 #define HAVE_READLINE_HISTORY_H 1 140 #endif 141 142 /* Define to 1 if you have the <readline/readline.h> header file. */ 143 #ifndef HAVE_READLINE_READLINE_H 144 #define HAVE_READLINE_READLINE_H 1 145 #endif 146 147 /* Define to 1 if you have the <stdint.h> header file. */ 148 #ifndef HAVE_STDINT_H 149 #define HAVE_STDINT_H 1 150 #endif 151 152 /* Define to 1 if you have the <stdlib.h> header file. */ 153 #ifndef HAVE_STDLIB_H 154 #define HAVE_STDLIB_H 1 155 #endif 156 157 /* Define to 1 if you have the `strerror' function. */ 158 #ifndef HAVE_STRERROR 159 #define HAVE_STRERROR 1 160 #endif 161 162 /* Define to 1 if you have the <string> header file. */ 163 #ifndef HAVE_STRING 164 #define HAVE_STRING 1 165 #endif 166 167 /* Define to 1 if you have the <strings.h> header file. */ 168 #ifndef HAVE_STRINGS_H 169 #define HAVE_STRINGS_H 1 170 #endif 171 172 /* Define to 1 if you have the <string.h> header file. */ 173 #ifndef HAVE_STRING_H 174 #define HAVE_STRING_H 1 175 #endif 176 177 /* Define to 1 if you have `strtoimax'. */ 178 /* #undef HAVE_STRTOIMAX */ 179 180 /* Define to 1 if you have `strtoll'. */ 181 /* #undef HAVE_STRTOLL */ 182 183 /* Define to 1 if you have `strtoq'. */ 184 #ifndef HAVE_STRTOQ 185 #define HAVE_STRTOQ 1 186 #endif 187 188 /* Define to 1 if you have the <sys/stat.h> header file. */ 189 #ifndef HAVE_SYS_STAT_H 190 #define HAVE_SYS_STAT_H 1 191 #endif 192 193 /* Define to 1 if you have the <sys/types.h> header file. */ 194 #ifndef HAVE_SYS_TYPES_H 195 #define HAVE_SYS_TYPES_H 1 196 #endif 197 198 /* Define to 1 if you have the <type_traits.h> header file. */ 199 /* #undef HAVE_TYPE_TRAITS_H */ 200 201 /* Define to 1 if you have the <unistd.h> header file. */ 202 #ifndef HAVE_UNISTD_H 203 #define HAVE_UNISTD_H 1 204 #endif 205 206 /* Define to 1 if the system has the type `unsigned long long'. */ 207 #ifndef HAVE_UNSIGNED_LONG_LONG 208 #define HAVE_UNSIGNED_LONG_LONG 1 209 #endif 210 211 /* Define to 1 or 0, depending whether the compiler supports simple visibility 212 declarations. */ 213 /* #undef HAVE_VISIBILITY */ 214 215 /* Define to 1 if you have the <windows.h> header file. */ 216 /* #undef HAVE_WINDOWS_H */ 217 218 /* Define to 1 if you have the <zlib.h> header file. */ 219 #ifndef HAVE_ZLIB_H 220 #define HAVE_ZLIB_H 1 221 #endif 222 223 /* Define to 1 if you have `_strtoi64'. */ 224 /* #undef HAVE__STRTOI64 */ 225 226 /* Exclude these above definitions when building within PHP */ 227 #endif 228 229 /* The value of LINK_SIZE determines the number of bytes used to store links 230 as offsets within the compiled regex. The default is 2, which allows for 231 compiled patterns up to 64K long. This covers the vast majority of cases. 232 However, PCRE can also be compiled to use 3 or 4 bytes instead. This allows 233 for longer patterns in extreme cases. On systems that support it, 234 "configure" can be used to override this default. */ 235 #ifndef LINK_SIZE 236 #define LINK_SIZE 2 237 #endif 238 239 /* Define to the sub-directory where libtool stores uninstalled libraries. */ 240 /* This is ignored unless you are using libtool. */ 241 #ifndef LT_OBJDIR 242 #define LT_OBJDIR ".libs/" 243 #endif 244 245 /* The value of MATCH_LIMIT determines the default number of times the 246 internal match() function can be called during a single execution of 247 pcre_exec(). There is a runtime interface for setting a different limit. 248 The limit exists in order to catch runaway regular expressions that take 249 for ever to determine that they do not match. The default is set very large 250 so that it does not accidentally catch legitimate cases. On systems that 251 support it, "configure" can be used to override this default default. */ 252 #ifndef MATCH_LIMIT 253 #define MATCH_LIMIT 10000000 254 #endif 255 256 /* The above limit applies to all calls of match(), whether or not they 257 increase the recursion depth. In some environments it is desirable to limit 258 the depth of recursive calls of match() more strictly, in order to restrict 259 the maximum amount of stack (or heap, if NO_RECURSE is defined) that is 260 used. The value of MATCH_LIMIT_RECURSION applies only to recursive calls of 261 match(). To have any useful effect, it must be less than the value of 262 MATCH_LIMIT. The default is to use the same value as MATCH_LIMIT. There is 263 a runtime method for setting a different limit. On systems that support it, 264 "configure" can be used to override the default. */ 265 #ifndef MATCH_LIMIT_RECURSION 266 #define MATCH_LIMIT_RECURSION MATCH_LIMIT 267 #endif 268 269 /* This limit is parameterized just in case anybody ever wants to change it. 270 Care must be taken if it is increased, because it guards against integer 271 overflow caused by enormously large patterns. */ 272 #ifndef MAX_NAME_COUNT 273 #define MAX_NAME_COUNT 10000 274 #endif 275 276 /* This limit is parameterized just in case anybody ever wants to change it. 277 Care must be taken if it is increased, because it guards against integer 278 overflow caused by enormously large patterns. */ 279 #ifndef MAX_NAME_SIZE 280 #define MAX_NAME_SIZE 32 281 #endif 282 283 /* The value of NEWLINE determines the default newline character sequence. 284 PCRE client programs can override this by selecting other values at run 285 time. In ASCII environments, the value can be 10 (LF), 13 (CR), or 3338 286 (CRLF); in EBCDIC environments the value can be 21 or 37 (LF), 13 (CR), or 287 3349 or 3365 (CRLF) because there are two alternative codepoints (0x15 and 288 0x25) that are used as the NL line terminator that is equivalent to ASCII 289 LF. In both ASCII and EBCDIC environments the value can also be -1 (ANY), 290 or -2 (ANYCRLF). */ 291 #ifndef NEWLINE 292 #define NEWLINE 10 293 #endif 294 295 /* Define to 1 if your C compiler doesn't accept -c and -o together. */ 296 /* #undef NO_MINUS_C_MINUS_O */ 297 298 /* PCRE uses recursive function calls to handle backtracking while matching. 299 This can sometimes be a problem on systems that have stacks of limited 300 size. Define NO_RECURSE to any value to get a version that doesn't use 301 recursion in the match() function; instead it creates its own stack by 302 steam using pcre_recurse_malloc() to obtain memory from the heap. For more 303 detail, see the comments and other stuff just above the match() function. 304 */ 305 /* #undef NO_RECURSE */ 306 307 #define PARENS_NEST_LIMIT 250 308 309 /* Name of package */ 310 #define PACKAGE "pcre" 311 312 /* Define to the address where bug reports for this package should be sent. */ 313 #define PACKAGE_BUGREPORT "" 314 315 /* Define to the full name of this package. */ 316 #define PACKAGE_NAME "PCRE" 317 318 /* Define to the full name and version of this package. */ 319 #define PACKAGE_STRING "PCRE 8.38" 320 321 /* Define to the one symbol short name of this package. */ 322 #define PACKAGE_TARNAME "pcre" 323 324 /* Define to the home page for this package. */ 325 #define PACKAGE_URL "" 326 327 /* Define to the version of this package. */ 328 #define PACKAGE_VERSION "8.38" 329 330 /* to make a symbol visible */ 331 /* #undef PCRECPP_EXP_DECL */ 332 333 /* to make a symbol visible */ 334 /* #undef PCRECPP_EXP_DEFN */ 335 336 /* The value of PARENS_NEST_LIMIT specifies the maximum depth of nested 337 parentheses (of any kind) in a pattern. This limits the amount of system 338 stack that is used while compiling a pattern. */ 339 #ifndef PARENS_NEST_LIMIT 340 #define PARENS_NEST_LIMIT 250 341 #endif 342 343 /* The value of PCREGREP_BUFSIZE determines the size of buffer used by 344 pcregrep to hold parts of the file it is searching. This is also the 345 minimum value. The actual amount of memory used by pcregrep is three times 346 this number, because it allows for the buffering of "before" and "after" 347 lines. */ 348 /* #undef PCREGREP_BUFSIZE */ 349 350 /* to make a symbol visible */ 351 /* #undef PCREPOSIX_EXP_DECL */ 352 353 /* to make a symbol visible */ 354 /* #undef PCREPOSIX_EXP_DEFN */ 355 356 /* to make a symbol visible */ 357 /* #undef PCRE_EXP_DATA_DEFN */ 358 359 /* to make a symbol visible */ 360 /* #undef PCRE_EXP_DECL */ 361 362 363 /* If you are compiling for a system other than a Unix-like system or 364 Win32, and it needs some magic to be inserted before the definition 365 of a function that is exported by the library, define this macro to 366 contain the relevant magic. If you do not define this macro, a suitable 367 __declspec value is used for Windows systems; in other environments 368 "extern" is used for a C compiler and "extern C" for a C++ compiler. 369 This macro apears at the start of every exported function that is part 370 of the external API. It does not appear on functions that are "external" 371 in the C sense, but which are internal to the library. */ 372 /* #undef PCRE_EXP_DEFN */ 373 374 /* Define to any value if linking statically (TODO: make nice with Libtool) */ 375 /* #undef PCRE_STATIC */ 376 377 /* When calling PCRE via the POSIX interface, additional working storage is 378 required for holding the pointers to capturing substrings because PCRE 379 requires three integers per substring, whereas the POSIX interface provides 380 only two. If the number of expected substrings is small, the wrapper 381 function uses space on the stack, because this is faster than using 382 malloc() for each call. The threshold above which the stack is no longer 383 used is defined by POSIX_MALLOC_THRESHOLD. */ 384 #ifndef POSIX_MALLOC_THRESHOLD 385 #define POSIX_MALLOC_THRESHOLD 10 386 #endif 387 388 /* Define to necessary symbol if this constant uses a non-standard name on 389 your system. */ 390 /* #undef PTHREAD_CREATE_JOINABLE */ 391 392 /* Define to 1 if you have the ANSI C header files. */ 393 #ifndef STDC_HEADERS 394 #define STDC_HEADERS 1 395 #endif 396 397 /* Define to allow pcretest and pcregrep to be linked with gcov, so that they 398 are able to generate code coverage reports. */ 399 #undef SUPPORT_GCOV 400 401 /* Define to any value to enable support for Just-In-Time compiling. */ 402 #if HAVE_PCRE_JIT_SUPPORT 403 #define SUPPORT_JIT 404 #endif 405 406 /* Define to any value to allow pcregrep to be linked with libbz2, so that it 407 is able to handle .bz2 files. */ 408 /* #undef SUPPORT_LIBBZ2 */ 409 410 /* Define to any value to allow pcretest to be linked with libedit. */ 411 #undef SUPPORT_LIBEDIT 412 413 /* Define to any value to allow pcretest to be linked with libreadline. */ 414 /* #undef SUPPORT_LIBREADLINE */ 415 416 /* Define to any value to allow pcregrep to be linked with libz, so that it is 417 able to handle .gz files. */ 418 /* #undef SUPPORT_LIBZ */ 419 420 /* Define to any value to enable the 16 bit PCRE library. */ 421 /* #undef SUPPORT_PCRE16 */ 422 423 /* Define to any value to enable the 32 bit PCRE library. */ 424 /* #undef SUPPORT_PCRE32 */ 425 426 /* Define to any value to enable the 8 bit PCRE library. */ 427 /* #undef SUPPORT_PCRE8 */ 428 429 /* Define to any value to enable JIT support in pcregrep. */ 430 /* #undef SUPPORT_PCREGREP_JIT */ 431 432 /* Define to enable support for Unicode properties */ 433 /* #undef SUPPORT_UCP */ 434 435 /* Define to any value to enable support for the UTF-8/16/32 Unicode encoding. 436 This will work even in an EBCDIC environment, but it is incompatible with 437 the EBCDIC macro. That is, PCRE can support *either* EBCDIC code *or* 438 ASCII/UTF-8/16/32, but not both at once. */ 439 /* #undef SUPPORT_UTF8 */ 440 441 /* Valgrind support to find invalid memory reads. */ 442 /* #undef SUPPORT_VALGRIND */ 443 444 /* Version number of package */ 445 #ifndef VERSION 446 #define VERSION "8.38" 447 #endif 448 449 /* Define to empty if `const' does not conform to ANSI C. */ 450 /* #undef const */ 451 452 /* Define to the type of a signed integer type of width exactly 64 bits if 453 such a type exists and the standard includes do not define it. */ 454 /* #undef int64_t */ 455 456 /* Define to `unsigned int' if <sys/types.h> does not define. */ 457 /* #undef size_t */ 458