xref: /PHP-5.3/README.TESTING (revision 77aa2935)
1[IMPORTANT NOTICE]
2------------------
3 Failed tests usualy indicate a problem with your local system setup
4and not within PHP itself (at least for official PHP release versions).
5You may decide to automaticaly submit a test summary to our QA workflow
6at the end of a test run.
7 Please do *not* submit a failed test as a bug or ask for help on why
8it failed on your system without providing substantial backup information
9on *why* the test failed on your special setup. Thank you :-)
10
11
12[Testing Basics]
13----------------
14 The easiest way to test your PHP build is to run "make test" from the
15command line after successfully compiling. This will run the complete
16tests for all enabled functionalities and extensions using the PHP
17CLI binary.
18 To execute test scripts, you must build PHP with some SAPI, then you
19type "make test" to execute all or some test scripts saved under
20"tests" directory under source root directory.
21
22Usage:
23make test
24
25 "make test" basically executes "run-tests.php" script
26under the source root (parallel builds will not work). Therefore you
27can execute the script as follows:
28
29TEST_PHP_EXECUTABLE=sapi/cli/php \
30sapi/cli/php [-c /path/to/php.ini] run-tests.php [ext/foo/tests/GLOB]
31
32
33[Which "php" executable "make test" look for]
34---------------------------------------------
35If you are running the run-tests.php script from the command line (as above)
36you must set the TEST_PHP_EXECUTABLE environment variable to explicitly
37select the PHP executable that is to be tested, that is, used to run the test scripts.
38
39If you run the tests using make test, the PHP CLI and CGI executables are
40automatically set for you. "make test" executes "run-tests.php" script with the CLI binary.  Some
41test scripts such as session must be executed by CGI SAPI. Therefore,
42you must build PHP with CGI SAPI to perform all tests.
43
44NOTE: PHP binary executing "run-tests.php" and php binary used for
45executing test scripts may differ. If you use different PHP binary for
46executing "run-tests.php" script, you may get errors.
47
48
49[Which php.ini is used]
50-----------------------
51 "make test" uses the same php.ini file as it would once installed.
52The tests have been written to be independent of that php.ini file,
53so if you find a test that is affected by a setting, please report
54this, so we can address the issue.
55
56
57[Which test scripts are executed]
58---------------------------------
59 "run-tests.php" ("make test"), without any arguments executes all
60test scripts by extracting all directories named "tests"
61from the source root and any subdirectories below. If there are files,
62which have a "phpt" extension, "run-tests.php" looks at the sections
63in these files, determines whether it should run it, by evaluating
64the 'SKIP' section. If the test is eligible for execution, the 'FILE'
65section is extracted into a ".php" file (with the same name besides
66the extension) and gets executed.
67When an argument is given or TESTS environment variable is set, the
68GLOB is expanded by the shell and any file with extension "*.phpt" is
69regarded as a test file.
70
71 Tester can easily execute tests selectively with as follows.
72
73Examples:
74./sapi/cli/php run-tests.php ext/mbstring/*
75./sapi/cli/php run-tests.php ext/mbstring/020.phpt
76
77
78[Test results]
79--------------
80 Test results are printed to standard output. If there is a failed test,
81the "run-tests.php" script saves the result, the expected result and the
82code executed to the test script directory. For example, if
83ext/myext/tests/myext.phpt fails to pass, the following files are created:
84
85ext/myext/tests/myext.php   - actual test file executed
86ext/myext/tests/myext.log   - log of test execution (L)
87ext/myext/tests/myext.exp   - expected output (E)
88ext/myext/tests/myext.out   - output from test script (O)
89ext/myext/tests/myext.diff  - diff of .out and .exp (D)
90
91 Failed tests are always bugs. Either the test is bugged or not considering
92factors applying to the tester's environment, or there is a bug in PHP.
93If this is a known bug, we strive to provide bug numbers, in either the
94test name or the file name. You can check the status of such a bug, by
95going to: http://bugs.php.net/12345 where 12345 is the bug number.
96For clarity and automated processing, bug numbers are prefixed by a hash
97sign '#' in test names and/or test cases are named bug12345.phpt.
98
99NOTE: The files generated by tests can be selected by setting the
100environment variable TEST_PHP_LOG_FORMAT. For each file you want to be
101generated use the character in brackets as shown above (default is LEOD).
102The php file will be generated always.
103
104NOTE: You can set environment variable TEST_PHP_DETAILED to enable
105detailed test information.
106
107[Automated testing]
108 If you like to keep up to speed, with latest developments and quality
109assurance, setting the environment variable NO_INTERACTION to 1, will not
110prompt the tester for any user input.
111
112Normally, the exit status of "make test" is zero, regardless of the results
113of independent tests. Set the environment variable REPORT_EXIT_STATUS to 1,
114and "make test" will set the exit status ("$?") to non-zero, when an
115individual test has failed.
116
117Example script to be run by cron(1):
118========== qa-test.sh =============
119#!/bin/sh
120
121CO_DIR=$HOME/cvs/php5
122MYMAIL=qa-test@domain.com
123TMPDIR=/var/tmp
124TODAY=`date +"%Y%m%d"`
125
126# Make sure compilation enviroment is correct
127CONFIGURE_OPTS='--disable-all --enable-cli --with-pcre'
128export MAKE=gmake
129export CC=gcc
130
131# Set test environment
132export NO_INTERACTION=1
133export REPORT_EXIT_STATUS=1
134
135cd $CO_DIR
136cvs update . >>$TMPDIR/phpqatest.$TODAY
137./cvsclean ; ./buildconf ; ./configure $CONFIGURE_OPTS ; $MAKE
138$MAKE test >>$TMPDIR/phpqatest.$TODAY 2>&1
139if test $? -gt 0
140then
141        cat $TMPDIR/phpqatest.$TODAY | mail -s"PHP-QA Test Failed for $TODAY" $MYMAIL
142fi
143========== end of qa-test.sh =============
144
145NOTE: the exit status of run-tests.php will be 1 when
146REPORT_EXIT_STATUS is set. The result of "make test" may be higher
147than that. At present, gmake 3.79.1 returns 2, so it is
148advised to test for non-zero, rather then a specific value.
149
150
151[Creating new test files]
152-------------------------
153 Writing test file is very easy if you are used to PHP.
154See the HOWTO at http://qa.php.net/write-test.php
155
156
157[How to help us]
158----------------
159 If you find bug in PHP, you can submit bug report AND test script
160for us. You don't have to write complete script, just give us test
161script with following format. Please test the script and make sure
162you write the correct ACTUAL OUTPUT and EXPECTED OUTPUT before you
163submit.
164
165<?php
166/*
167Bug #12345
168substr() bug. Do not return expected string.
169
170ACTUAL OUTPUT
171XYXA
172
173EXPECTED OUTPUT
174ABCD
175*/
176
177$str = "XYZABCD";
178echo substr($str,3,7);
179
180?>
181