1 /* 2 * Stack-less Just-In-Time compiler 3 * 4 * Copyright Zoltan Herczeg (hzmester@freemail.hu). All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without modification, are 7 * permitted provided that the following conditions are met: 8 * 9 * 1. Redistributions of source code must retain the above copyright notice, this list of 10 * conditions and the following disclaimer. 11 * 12 * 2. Redistributions in binary form must reproduce the above copyright notice, this list 13 * of conditions and the following disclaimer in the documentation and/or other materials 14 * provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND CONTRIBUTORS ``AS IS'' AND ANY 17 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 19 * SHALL THE COPYRIGHT HOLDER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED 21 * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR 22 * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 23 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN 24 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 */ 26 27 #ifndef _SLJIT_CONFIG_INTERNAL_H_ 28 #define _SLJIT_CONFIG_INTERNAL_H_ 29 30 #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) \ 31 || (defined SLJIT_DEBUG && SLJIT_DEBUG && (!defined(SLJIT_ASSERT) || !defined(SLJIT_UNREACHABLE))) 32 #include <stdio.h> 33 #endif 34 35 #if (defined SLJIT_DEBUG && SLJIT_DEBUG \ 36 && (!defined(SLJIT_ASSERT) || !defined(SLJIT_UNREACHABLE) || !defined(SLJIT_HALT_PROCESS))) 37 #include <stdlib.h> 38 #endif 39 40 #ifdef __cplusplus 41 extern "C" { 42 #endif 43 44 /* 45 SLJIT defines the following architecture dependent types and macros: 46 47 Types: 48 sljit_s8, sljit_u8 : signed and unsigned 8 bit integer type 49 sljit_s16, sljit_u16 : signed and unsigned 16 bit integer type 50 sljit_s32, sljit_u32 : signed and unsigned 32 bit integer type 51 sljit_sw, sljit_uw : signed and unsigned machine word, enough to store a pointer 52 sljit_p : unsgined pointer value (usually the same as sljit_uw, but 53 some 64 bit ABIs may use 32 bit pointers) 54 sljit_f32 : 32 bit single precision floating point value 55 sljit_f64 : 64 bit double precision floating point value 56 57 Macros for feature detection (boolean): 58 SLJIT_32BIT_ARCHITECTURE : 32 bit architecture 59 SLJIT_64BIT_ARCHITECTURE : 64 bit architecture 60 SLJIT_LITTLE_ENDIAN : little endian architecture 61 SLJIT_BIG_ENDIAN : big endian architecture 62 SLJIT_UNALIGNED : allows unaligned memory accesses for non-fpu operations (only!) 63 SLJIT_INDIRECT_CALL : see SLJIT_FUNC_OFFSET() for more information 64 65 Constants: 66 SLJIT_NUMBER_OF_REGISTERS : number of available registers 67 SLJIT_NUMBER_OF_SCRATCH_REGISTERS : number of available scratch registers 68 SLJIT_NUMBER_OF_SAVED_REGISTERS : number of available saved registers 69 SLJIT_NUMBER_OF_FLOAT_REGISTERS : number of available floating point registers 70 SLJIT_NUMBER_OF_SCRATCH_FLOAT_REGISTERS : number of available floating point scratch registers 71 SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS : number of available floating point saved registers 72 SLJIT_WORD_SHIFT : the shift required to apply when accessing a sljit_sw/sljit_uw array by index 73 SLJIT_F32_SHIFT : the shift required to apply when accessing 74 a single precision floating point array by index 75 SLJIT_F64_SHIFT : the shift required to apply when accessing 76 a double precision floating point array by index 77 SLJIT_PREF_SHIFT_REG : x86 systems prefers ecx for shifting by register 78 the scratch register index of ecx is stored in this variable 79 SLJIT_LOCALS_OFFSET : local space starting offset (SLJIT_SP + SLJIT_LOCALS_OFFSET) 80 SLJIT_RETURN_ADDRESS_OFFSET : a return instruction always adds this offset to the return address 81 82 Other macros: 83 SLJIT_FUNC : calling convention attribute for both calling JIT from C and C calling back from JIT 84 SLJIT_W(number) : defining 64 bit constants on 64 bit architectures (compiler independent helper) 85 */ 86 87 /*****************/ 88 /* Sanity check. */ 89 /*****************/ 90 91 #if !((defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \ 92 || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \ 93 || (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) \ 94 || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \ 95 || (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \ 96 || (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \ 97 || (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \ 98 || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \ 99 || (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \ 100 || (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \ 101 || (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) \ 102 || (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) \ 103 || (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) \ 104 || (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)) 105 #error "An architecture must be selected" 106 #endif 107 108 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \ 109 + (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \ 110 + (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) \ 111 + (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \ 112 + (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \ 113 + (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \ 114 + (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \ 115 + (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \ 116 + (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) \ 117 + (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \ 118 + (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \ 119 + (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) \ 120 + (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) \ 121 + (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) >= 2 122 #error "Multiple architectures are selected" 123 #endif 124 125 /********************************************************/ 126 /* Automatic CPU detection (requires compiler support). */ 127 /********************************************************/ 128 129 #if (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) 130 131 #ifndef _WIN32 132 133 #if defined(__i386__) || defined(__i386) 134 #define SLJIT_CONFIG_X86_32 1 135 #elif defined(__x86_64__) 136 #define SLJIT_CONFIG_X86_64 1 137 #elif defined(__arm__) || defined(__ARM__) 138 #ifdef __thumb2__ 139 #define SLJIT_CONFIG_ARM_THUMB2 1 140 #elif defined(__ARM_ARCH_7__) || defined(__ARM_ARCH_7A__) || defined(__ARM_ARCH_7R__) 141 #define SLJIT_CONFIG_ARM_V7 1 142 #else 143 #define SLJIT_CONFIG_ARM_V5 1 144 #endif 145 #elif defined (__aarch64__) 146 #define SLJIT_CONFIG_ARM_64 1 147 #elif defined(__ppc64__) || defined(__powerpc64__) || defined(_ARCH_PPC64) || (defined(_POWER) && defined(__64BIT__)) 148 #define SLJIT_CONFIG_PPC_64 1 149 #elif defined(__ppc__) || defined(__powerpc__) || defined(_ARCH_PPC) || defined(_ARCH_PWR) || defined(_ARCH_PWR2) || defined(_POWER) 150 #define SLJIT_CONFIG_PPC_32 1 151 #elif defined(__mips__) && !defined(_LP64) 152 #define SLJIT_CONFIG_MIPS_32 1 153 #elif defined(__mips64) 154 #define SLJIT_CONFIG_MIPS_64 1 155 #elif defined(__sparc__) || defined(__sparc) 156 #define SLJIT_CONFIG_SPARC_32 1 157 #elif defined(__tilegx__) 158 #define SLJIT_CONFIG_TILEGX 1 159 #else 160 /* Unsupported architecture */ 161 #define SLJIT_CONFIG_UNSUPPORTED 1 162 #endif 163 164 #else /* _WIN32 */ 165 166 #if defined(_M_X64) || defined(__x86_64__) 167 #define SLJIT_CONFIG_X86_64 1 168 #elif (defined(_M_ARM) && _M_ARM >= 7 && defined(_M_ARMT)) || defined(__thumb2__) 169 #define SLJIT_CONFIG_ARM_THUMB2 1 170 #elif (defined(_M_ARM) && _M_ARM >= 7) 171 #define SLJIT_CONFIG_ARM_V7 1 172 #elif defined(_ARM_) 173 #define SLJIT_CONFIG_ARM_V5 1 174 #elif defined(_M_ARM64) || defined(__aarch64__) 175 #define SLJIT_CONFIG_ARM_64 1 176 #else 177 #define SLJIT_CONFIG_X86_32 1 178 #endif 179 180 #endif /* !_WIN32 */ 181 #endif /* SLJIT_CONFIG_AUTO */ 182 183 #if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) 184 #undef SLJIT_EXECUTABLE_ALLOCATOR 185 #endif 186 187 /******************************/ 188 /* CPU family type detection. */ 189 /******************************/ 190 191 #if (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \ 192 || (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) 193 #define SLJIT_CONFIG_ARM_32 1 194 #endif 195 196 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) 197 #define SLJIT_CONFIG_X86 1 198 #elif (defined SLJIT_CONFIG_ARM_32 && SLJIT_CONFIG_ARM_32) || (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) 199 #define SLJIT_CONFIG_ARM 1 200 #elif (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) 201 #define SLJIT_CONFIG_PPC 1 202 #elif (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) || (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) 203 #define SLJIT_CONFIG_MIPS 1 204 #elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) || (defined SLJIT_CONFIG_SPARC_64 && SLJIT_CONFIG_SPARC_64) 205 #define SLJIT_CONFIG_SPARC 1 206 #endif 207 208 /***********************************************************/ 209 /* Intel Control-flow Enforcement Technology (CET) spport. */ 210 /***********************************************************/ 211 212 #ifdef SLJIT_CONFIG_X86 213 #if defined(__CET__) 214 #define SLJIT_CONFIG_X86_CET 1 215 #endif 216 #if (defined SLJIT_CONFIG_X86_CET && SLJIT_CONFIG_X86_CET) 217 #if defined(__GNUC__) 218 #if !defined (__SHSTK__) 219 #error "-mshstk is needed to compile with -fcf-protection" 220 #endif 221 #include <x86intrin.h> 222 #endif 223 #endif 224 #endif 225 226 /**********************************/ 227 /* External function definitions. */ 228 /**********************************/ 229 230 /* General macros: 231 Note: SLJIT is designed to be independent from them as possible. 232 233 In release mode (SLJIT_DEBUG is not defined) only the following 234 external functions are needed: 235 */ 236 237 #ifndef SLJIT_MALLOC 238 #define SLJIT_MALLOC(size, allocator_data) malloc(size) 239 #endif 240 241 #ifndef SLJIT_FREE 242 #define SLJIT_FREE(ptr, allocator_data) free(ptr) 243 #endif 244 245 #ifndef SLJIT_MEMCPY 246 #define SLJIT_MEMCPY(dest, src, len) memcpy(dest, src, len) 247 #endif 248 249 #ifndef SLJIT_MEMMOVE 250 #define SLJIT_MEMMOVE(dest, src, len) memmove(dest, src, len) 251 #endif 252 253 #ifndef SLJIT_ZEROMEM 254 #define SLJIT_ZEROMEM(dest, len) memset(dest, 0, len) 255 #endif 256 257 /***************************/ 258 /* Compiler helper macros. */ 259 /***************************/ 260 261 #if !defined(SLJIT_LIKELY) && !defined(SLJIT_UNLIKELY) 262 263 #if defined(__GNUC__) && (__GNUC__ >= 3) 264 #define SLJIT_LIKELY(x) __builtin_expect((x), 1) 265 #define SLJIT_UNLIKELY(x) __builtin_expect((x), 0) 266 #else 267 #define SLJIT_LIKELY(x) (x) 268 #define SLJIT_UNLIKELY(x) (x) 269 #endif 270 271 #endif /* !defined(SLJIT_LIKELY) && !defined(SLJIT_UNLIKELY) */ 272 273 #ifndef SLJIT_INLINE 274 /* Inline functions. Some old compilers do not support them. */ 275 #if defined(__SUNPRO_C) && __SUNPRO_C <= 0x510 276 #define SLJIT_INLINE 277 #else 278 #define SLJIT_INLINE __inline 279 #endif 280 #endif /* !SLJIT_INLINE */ 281 282 #ifndef SLJIT_NOINLINE 283 /* Not inline functions. */ 284 #if defined(__GNUC__) 285 #define SLJIT_NOINLINE __attribute__ ((noinline)) 286 #else 287 #define SLJIT_NOINLINE 288 #endif 289 #endif /* !SLJIT_INLINE */ 290 291 #ifndef SLJIT_UNUSED_ARG 292 /* Unused arguments. */ 293 #define SLJIT_UNUSED_ARG(arg) (void)arg 294 #endif 295 296 /*********************************/ 297 /* Type of public API functions. */ 298 /*********************************/ 299 300 #ifndef SLJIT_API_FUNC_ATTRIBUTE 301 #if (defined SLJIT_CONFIG_STATIC && SLJIT_CONFIG_STATIC) 302 /* Static ABI functions. For all-in-one programs. */ 303 304 #if defined(__GNUC__) 305 /* Disable unused warnings in gcc. */ 306 #define SLJIT_API_FUNC_ATTRIBUTE static __attribute__((unused)) 307 #else 308 #define SLJIT_API_FUNC_ATTRIBUTE static 309 #endif 310 311 #else 312 #define SLJIT_API_FUNC_ATTRIBUTE 313 #endif /* (defined SLJIT_CONFIG_STATIC && SLJIT_CONFIG_STATIC) */ 314 #endif /* defined SLJIT_API_FUNC_ATTRIBUTE */ 315 316 /****************************/ 317 /* Instruction cache flush. */ 318 /****************************/ 319 320 #if (!defined SLJIT_CACHE_FLUSH && defined __has_builtin) 321 #if __has_builtin(__builtin___clear_cache) 322 323 #define SLJIT_CACHE_FLUSH(from, to) \ 324 __builtin___clear_cache((char*)(from), (char*)(to)) 325 326 #endif /* __has_builtin(__builtin___clear_cache) */ 327 #endif /* (!defined SLJIT_CACHE_FLUSH && defined __has_builtin) */ 328 329 #ifndef SLJIT_CACHE_FLUSH 330 331 #if (defined SLJIT_CONFIG_X86 && SLJIT_CONFIG_X86) 332 333 /* Not required to implement on archs with unified caches. */ 334 #define SLJIT_CACHE_FLUSH(from, to) 335 336 #elif defined __APPLE__ 337 338 /* Supported by all macs since Mac OS 10.5. 339 However, it does not work on non-jailbroken iOS devices, 340 although the compilation is successful. */ 341 342 #define SLJIT_CACHE_FLUSH(from, to) \ 343 sys_icache_invalidate((char*)(from), (char*)(to) - (char*)(from)) 344 345 #elif (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC) 346 347 /* The __clear_cache() implementation of GCC is a dummy function on PowerPC. */ 348 #define SLJIT_CACHE_FLUSH(from, to) \ 349 ppc_cache_flush((from), (to)) 350 #define SLJIT_CACHE_FLUSH_OWN_IMPL 1 351 352 #elif (defined(__GNUC__) && (__GNUC__ >= 5 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 3))) 353 354 #define SLJIT_CACHE_FLUSH(from, to) \ 355 __builtin___clear_cache((char*)(from), (char*)(to)) 356 357 #elif defined __ANDROID__ 358 359 /* Android lacks __clear_cache; instead, cacheflush should be used. */ 360 361 #define SLJIT_CACHE_FLUSH(from, to) \ 362 cacheflush((long)(from), (long)(to), 0) 363 364 #elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) 365 366 /* The __clear_cache() implementation of GCC is a dummy function on Sparc. */ 367 #define SLJIT_CACHE_FLUSH(from, to) \ 368 sparc_cache_flush((from), (to)) 369 #define SLJIT_CACHE_FLUSH_OWN_IMPL 1 370 371 #elif defined _WIN32 372 373 #define SLJIT_CACHE_FLUSH(from, to) \ 374 FlushInstructionCache(GetCurrentProcess(), (char*)(from), (char*)(to) - (char*)(from)) 375 376 #else 377 378 /* Calls __ARM_NR_cacheflush on ARM-Linux. */ 379 #define SLJIT_CACHE_FLUSH(from, to) \ 380 __clear_cache((char*)(from), (char*)(to)) 381 382 #endif 383 384 #endif /* !SLJIT_CACHE_FLUSH */ 385 386 /******************************************************/ 387 /* Integer and floating point type definitions. */ 388 /******************************************************/ 389 390 /* 8 bit byte type. */ 391 typedef unsigned char sljit_u8; 392 typedef signed char sljit_s8; 393 394 /* 16 bit half-word type. */ 395 typedef unsigned short int sljit_u16; 396 typedef signed short int sljit_s16; 397 398 /* 32 bit integer type. */ 399 typedef unsigned int sljit_u32; 400 typedef signed int sljit_s32; 401 402 /* Machine word type. Enough for storing a pointer. 403 32 bit for 32 bit machines. 404 64 bit for 64 bit machines. */ 405 #if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) 406 /* Just to have something. */ 407 #define SLJIT_WORD_SHIFT 0 408 typedef unsigned long int sljit_uw; 409 typedef long int sljit_sw; 410 #elif !(defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \ 411 && !(defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \ 412 && !(defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \ 413 && !(defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \ 414 && !(defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) 415 #define SLJIT_32BIT_ARCHITECTURE 1 416 #define SLJIT_WORD_SHIFT 2 417 typedef unsigned int sljit_uw; 418 typedef int sljit_sw; 419 #else 420 #define SLJIT_64BIT_ARCHITECTURE 1 421 #define SLJIT_WORD_SHIFT 3 422 #ifdef _WIN32 423 #ifdef __GNUC__ 424 /* These types do not require windows.h */ 425 typedef unsigned long long sljit_uw; 426 typedef long long sljit_sw; 427 #else 428 typedef unsigned __int64 sljit_uw; 429 typedef __int64 sljit_sw; 430 #endif 431 #else /* !_WIN32 */ 432 typedef unsigned long int sljit_uw; 433 typedef long int sljit_sw; 434 #endif /* _WIN32 */ 435 #endif 436 437 typedef sljit_uw sljit_p; 438 439 /* Floating point types. */ 440 typedef float sljit_f32; 441 typedef double sljit_f64; 442 443 /* Shift for pointer sized data. */ 444 #define SLJIT_POINTER_SHIFT SLJIT_WORD_SHIFT 445 446 /* Shift for double precision sized data. */ 447 #define SLJIT_F32_SHIFT 2 448 #define SLJIT_F64_SHIFT 3 449 450 #ifndef SLJIT_W 451 452 /* Defining long constants. */ 453 #if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) 454 #define SLJIT_W(w) (w##l) 455 #elif (defined SLJIT_64BIT_ARCHITECTURE && SLJIT_64BIT_ARCHITECTURE) 456 #define SLJIT_W(w) (w##ll) 457 #else 458 #define SLJIT_W(w) (w) 459 #endif 460 461 #endif /* !SLJIT_W */ 462 463 /*************************/ 464 /* Endianness detection. */ 465 /*************************/ 466 467 #if !defined(SLJIT_BIG_ENDIAN) && !defined(SLJIT_LITTLE_ENDIAN) 468 469 /* These macros are mostly useful for the applications. */ 470 #if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \ 471 || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) 472 473 #ifdef __LITTLE_ENDIAN__ 474 #define SLJIT_LITTLE_ENDIAN 1 475 #else 476 #define SLJIT_BIG_ENDIAN 1 477 #endif 478 479 #elif (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \ 480 || (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) 481 482 #ifdef __MIPSEL__ 483 #define SLJIT_LITTLE_ENDIAN 1 484 #else 485 #define SLJIT_BIG_ENDIAN 1 486 #endif 487 488 #ifndef SLJIT_MIPS_REV 489 490 /* Auto detecting mips revision. */ 491 #if (defined __mips_isa_rev) && (__mips_isa_rev >= 6) 492 #define SLJIT_MIPS_REV 6 493 #elif (defined __mips_isa_rev && __mips_isa_rev >= 1) \ 494 || (defined __clang__ && defined _MIPS_ARCH_OCTEON) \ 495 || (defined __clang__ && defined _MIPS_ARCH_P5600) 496 /* clang either forgets to define (clang-7) __mips_isa_rev at all 497 * or sets it to zero (clang-8,-9) for -march=octeon (MIPS64 R2+) 498 * and -march=p5600 (MIPS32 R5). 499 * It also sets the __mips macro to 64 or 32 for -mipsN when N <= 5 500 * (should be set to N exactly) so we cannot rely on this too. 501 */ 502 #define SLJIT_MIPS_REV 1 503 #endif 504 505 #endif /* !SLJIT_MIPS_REV */ 506 507 #elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) 508 509 #define SLJIT_BIG_ENDIAN 1 510 511 #else 512 #define SLJIT_LITTLE_ENDIAN 1 513 #endif 514 515 #endif /* !defined(SLJIT_BIG_ENDIAN) && !defined(SLJIT_LITTLE_ENDIAN) */ 516 517 /* Sanity check. */ 518 #if (defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN) && (defined SLJIT_LITTLE_ENDIAN && SLJIT_LITTLE_ENDIAN) 519 #error "Exactly one endianness must be selected" 520 #endif 521 522 #if !(defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN) && !(defined SLJIT_LITTLE_ENDIAN && SLJIT_LITTLE_ENDIAN) 523 #error "Exactly one endianness must be selected" 524 #endif 525 526 #ifndef SLJIT_UNALIGNED 527 528 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \ 529 || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \ 530 || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \ 531 || (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \ 532 || (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \ 533 || (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \ 534 || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) 535 #define SLJIT_UNALIGNED 1 536 #endif 537 538 #endif /* !SLJIT_UNALIGNED */ 539 540 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) 541 /* Auto detect SSE2 support using CPUID. 542 On 64 bit x86 cpus, sse2 must be present. */ 543 #define SLJIT_DETECT_SSE2 1 544 #endif 545 546 /*****************************************************************************************/ 547 /* Calling convention of functions generated by SLJIT or called from the generated code. */ 548 /*****************************************************************************************/ 549 550 #ifndef SLJIT_FUNC 551 552 #if (defined SLJIT_USE_CDECL_CALLING_CONVENTION && SLJIT_USE_CDECL_CALLING_CONVENTION) 553 554 /* Force cdecl. */ 555 #define SLJIT_FUNC 556 557 #elif (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) 558 559 #if defined(__GNUC__) && !defined(__APPLE__) 560 561 #define SLJIT_FUNC __attribute__ ((fastcall)) 562 #define SLJIT_X86_32_FASTCALL 1 563 564 #elif defined(_MSC_VER) 565 566 #define SLJIT_FUNC __fastcall 567 #define SLJIT_X86_32_FASTCALL 1 568 569 #elif defined(__BORLANDC__) 570 571 #define SLJIT_FUNC __msfastcall 572 #define SLJIT_X86_32_FASTCALL 1 573 574 #else /* Unknown compiler. */ 575 576 /* The cdecl attribute is the default. */ 577 #define SLJIT_FUNC 578 579 #endif 580 581 #else /* Non x86-32 architectures. */ 582 583 #define SLJIT_FUNC 584 585 #endif /* SLJIT_CONFIG_X86_32 */ 586 587 #endif /* !SLJIT_FUNC */ 588 589 #ifndef SLJIT_INDIRECT_CALL 590 #if ((defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) && (!defined _CALL_ELF || _CALL_ELF == 1)) \ 591 || ((defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) && defined _AIX) 592 /* It seems certain ppc compilers use an indirect addressing for functions 593 which makes things complicated. */ 594 #define SLJIT_INDIRECT_CALL 1 595 #endif 596 #endif /* SLJIT_INDIRECT_CALL */ 597 598 /* The offset which needs to be substracted from the return address to 599 determine the next executed instruction after return. */ 600 #ifndef SLJIT_RETURN_ADDRESS_OFFSET 601 #if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) 602 #define SLJIT_RETURN_ADDRESS_OFFSET 8 603 #else 604 #define SLJIT_RETURN_ADDRESS_OFFSET 0 605 #endif 606 #endif /* SLJIT_RETURN_ADDRESS_OFFSET */ 607 608 /***************************************************/ 609 /* Functions of the built-in executable allocator. */ 610 /***************************************************/ 611 612 #if (defined SLJIT_EXECUTABLE_ALLOCATOR && SLJIT_EXECUTABLE_ALLOCATOR) 613 SLJIT_API_FUNC_ATTRIBUTE void* sljit_malloc_exec(sljit_uw size); 614 SLJIT_API_FUNC_ATTRIBUTE void sljit_free_exec(void* ptr); 615 SLJIT_API_FUNC_ATTRIBUTE void sljit_free_unused_memory_exec(void); 616 #define SLJIT_MALLOC_EXEC(size) sljit_malloc_exec(size) 617 #define SLJIT_FREE_EXEC(ptr) sljit_free_exec(ptr) 618 619 #if (defined SLJIT_PROT_EXECUTABLE_ALLOCATOR && SLJIT_PROT_EXECUTABLE_ALLOCATOR) 620 SLJIT_API_FUNC_ATTRIBUTE sljit_sw sljit_exec_offset(void* ptr); 621 #define SLJIT_EXEC_OFFSET(ptr) sljit_exec_offset(ptr) 622 #else 623 #define SLJIT_EXEC_OFFSET(ptr) 0 624 #endif 625 626 #endif 627 628 /**********************************************/ 629 /* Registers and locals offset determination. */ 630 /**********************************************/ 631 632 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) 633 634 #define SLJIT_NUMBER_OF_REGISTERS 12 635 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 9 636 #define SLJIT_LOCALS_OFFSET_BASE (compiler->locals_offset) 637 #define SLJIT_PREF_SHIFT_REG SLJIT_R2 638 639 #elif (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) 640 641 #define SLJIT_NUMBER_OF_REGISTERS 13 642 #ifndef _WIN64 643 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 6 644 #define SLJIT_LOCALS_OFFSET_BASE 0 645 #else /* _WIN64 */ 646 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 8 647 #define SLJIT_LOCALS_OFFSET_BASE (compiler->locals_offset) 648 #endif /* !_WIN64 */ 649 #define SLJIT_PREF_SHIFT_REG SLJIT_R3 650 651 #elif (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) 652 653 #define SLJIT_NUMBER_OF_REGISTERS 12 654 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 8 655 #define SLJIT_LOCALS_OFFSET_BASE 0 656 657 #elif (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) 658 659 #define SLJIT_NUMBER_OF_REGISTERS 12 660 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 8 661 #define SLJIT_LOCALS_OFFSET_BASE 0 662 663 #elif (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) 664 665 #define SLJIT_NUMBER_OF_REGISTERS 26 666 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 10 667 #define SLJIT_LOCALS_OFFSET_BASE 0 668 669 #elif (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC) 670 671 #define SLJIT_NUMBER_OF_REGISTERS 23 672 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 17 673 #if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) || (defined _AIX) 674 #define SLJIT_LOCALS_OFFSET_BASE ((6 + 8) * sizeof(sljit_sw)) 675 #elif (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) 676 /* Add +1 for double alignment. */ 677 #define SLJIT_LOCALS_OFFSET_BASE ((3 + 1) * sizeof(sljit_sw)) 678 #else 679 #define SLJIT_LOCALS_OFFSET_BASE (3 * sizeof(sljit_sw)) 680 #endif /* SLJIT_CONFIG_PPC_64 || _AIX */ 681 682 #elif (defined SLJIT_CONFIG_MIPS && SLJIT_CONFIG_MIPS) 683 684 #define SLJIT_NUMBER_OF_REGISTERS 21 685 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 8 686 #if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) 687 #define SLJIT_LOCALS_OFFSET_BASE (4 * sizeof(sljit_sw)) 688 #else 689 #define SLJIT_LOCALS_OFFSET_BASE 0 690 #endif 691 692 #elif (defined SLJIT_CONFIG_SPARC && SLJIT_CONFIG_SPARC) 693 694 #define SLJIT_NUMBER_OF_REGISTERS 18 695 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 14 696 #if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) 697 /* saved registers (16), return struct pointer (1), space for 6 argument words (1), 698 4th double arg (2), double alignment (1). */ 699 #define SLJIT_LOCALS_OFFSET_BASE ((16 + 1 + 6 + 2 + 1) * sizeof(sljit_sw)) 700 #endif 701 702 #elif (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) 703 704 #define SLJIT_NUMBER_OF_REGISTERS 10 705 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 5 706 #define SLJIT_LOCALS_OFFSET_BASE 0 707 708 #elif (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) 709 710 #define SLJIT_NUMBER_OF_REGISTERS 0 711 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 0 712 #define SLJIT_LOCALS_OFFSET_BASE 0 713 714 #endif 715 716 #define SLJIT_LOCALS_OFFSET (SLJIT_LOCALS_OFFSET_BASE) 717 718 #define SLJIT_NUMBER_OF_SCRATCH_REGISTERS \ 719 (SLJIT_NUMBER_OF_REGISTERS - SLJIT_NUMBER_OF_SAVED_REGISTERS) 720 721 #define SLJIT_NUMBER_OF_FLOAT_REGISTERS 6 722 #if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) && (defined _WIN64) 723 #define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 1 724 #else 725 #define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 0 726 #endif 727 728 #define SLJIT_NUMBER_OF_SCRATCH_FLOAT_REGISTERS \ 729 (SLJIT_NUMBER_OF_FLOAT_REGISTERS - SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS) 730 731 /*************************************/ 732 /* Debug and verbose related macros. */ 733 /*************************************/ 734 735 #if (defined SLJIT_DEBUG && SLJIT_DEBUG) 736 737 #if !defined(SLJIT_ASSERT) || !defined(SLJIT_UNREACHABLE) 738 739 /* SLJIT_HALT_PROCESS must halt the process. */ 740 #ifndef SLJIT_HALT_PROCESS 741 #define SLJIT_HALT_PROCESS() \ 742 abort(); 743 #endif /* !SLJIT_HALT_PROCESS */ 744 745 #endif /* !SLJIT_ASSERT || !SLJIT_UNREACHABLE */ 746 747 /* Feel free to redefine these two macros. */ 748 #ifndef SLJIT_ASSERT 749 750 #define SLJIT_ASSERT(x) \ 751 do { \ 752 if (SLJIT_UNLIKELY(!(x))) { \ 753 printf("Assertion failed at " __FILE__ ":%d\n", __LINE__); \ 754 SLJIT_HALT_PROCESS(); \ 755 } \ 756 } while (0) 757 758 #endif /* !SLJIT_ASSERT */ 759 760 #ifndef SLJIT_UNREACHABLE 761 762 #define SLJIT_UNREACHABLE() \ 763 do { \ 764 printf("Should never been reached " __FILE__ ":%d\n", __LINE__); \ 765 SLJIT_HALT_PROCESS(); \ 766 } while (0) 767 768 #endif /* !SLJIT_UNREACHABLE */ 769 770 #else /* (defined SLJIT_DEBUG && SLJIT_DEBUG) */ 771 772 /* Forcing empty, but valid statements. */ 773 #undef SLJIT_ASSERT 774 #undef SLJIT_UNREACHABLE 775 776 #define SLJIT_ASSERT(x) \ 777 do { } while (0) 778 #define SLJIT_UNREACHABLE() \ 779 do { } while (0) 780 781 #endif /* (defined SLJIT_DEBUG && SLJIT_DEBUG) */ 782 783 #ifndef SLJIT_COMPILE_ASSERT 784 785 #define SLJIT_COMPILE_ASSERT(x, description) \ 786 switch(0) { case 0: case ((x) ? 1 : 0): break; } 787 788 #endif /* !SLJIT_COMPILE_ASSERT */ 789 790 #ifdef __cplusplus 791 } /* extern "C" */ 792 #endif 793 794 #endif 795