1; Start a new pool named 'www'. 2; the variable $pool can be used in any directive and will be replaced by the 3; pool name ('www' here) 4[www] 5 6; Per pool prefix 7; It only applies on the following directives: 8; - 'access.log' 9; - 'slowlog' 10; - 'listen' (unixsocket) 11; - 'chroot' 12; - 'chdir' 13; - 'php_values' 14; - 'php_admin_values' 15; When not set, the global prefix (or @php_fpm_prefix@) applies instead. 16; Note: This directive can also be relative to the global prefix. 17; Default Value: none 18;prefix = /path/to/pools/$pool 19 20; Unix user/group of processes 21; Note: The user is mandatory. If the group is not set, the default user's group 22; will be used. 23user = @php_fpm_user@ 24group = @php_fpm_group@ 25 26; The address on which to accept FastCGI requests. 27; Valid syntaxes are: 28; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific IPv4 address on 29; a specific port; 30; '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on 31; a specific port; 32; 'port' - to listen on a TCP socket to all addresses 33; (IPv6 and IPv4-mapped) on a specific port; 34; '/path/to/unix/socket' - to listen on a unix socket. 35; Note: This value is mandatory. 36listen = 127.0.0.1:9000 37 38; Set listen(2) backlog. 39; Default Value: 511 (-1 on FreeBSD and OpenBSD) 40;listen.backlog = 511 41 42; Set permissions for unix socket, if one is used. In Linux, read/write 43; permissions must be set in order to allow connections from a web server. Many 44; BSD-derived systems allow connections regardless of permissions. 45; Default Values: user and group are set as the running user 46; mode is set to 0660 47;listen.owner = @php_fpm_user@ 48;listen.group = @php_fpm_group@ 49;listen.mode = 0660 50; When POSIX Access Control Lists are supported you can set them using 51; these options, value is a comma separated list of user/group names. 52; When set, listen.owner and listen.group are ignored 53;listen.acl_users = 54;listen.acl_groups = 55 56; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect. 57; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original 58; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address 59; must be separated by a comma. If this value is left blank, connections will be 60; accepted from any ip address. 61; Default Value: any 62;listen.allowed_clients = 127.0.0.1 63 64; Specify the nice(2) priority to apply to the pool processes (only if set) 65; The value can vary from -19 (highest priority) to 20 (lower priority) 66; Note: - It will only work if the FPM master process is launched as root 67; - The pool processes will inherit the master process priority 68; unless it specified otherwise 69; Default Value: no set 70; process.priority = -19 71 72; Choose how the process manager will control the number of child processes. 73; Possible Values: 74; static - a fixed number (pm.max_children) of child processes; 75; dynamic - the number of child processes are set dynamically based on the 76; following directives. With this process management, there will be 77; always at least 1 children. 78; pm.max_children - the maximum number of children that can 79; be alive at the same time. 80; pm.start_servers - the number of children created on startup. 81; pm.min_spare_servers - the minimum number of children in 'idle' 82; state (waiting to process). If the number 83; of 'idle' processes is less than this 84; number then some children will be created. 85; pm.max_spare_servers - the maximum number of children in 'idle' 86; state (waiting to process). If the number 87; of 'idle' processes is greater than this 88; number then some children will be killed. 89; ondemand - no children are created at startup. Children will be forked when 90; new requests will connect. The following parameter are used: 91; pm.max_children - the maximum number of children that 92; can be alive at the same time. 93; pm.process_idle_timeout - The number of seconds after which 94; an idle process will be killed. 95; Note: This value is mandatory. 96pm = dynamic 97 98; The number of child processes to be created when pm is set to 'static' and the 99; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'. 100; This value sets the limit on the number of simultaneous requests that will be 101; served. Equivalent to the ApacheMaxClients directive with mpm_prefork. 102; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP 103; CGI. The below defaults are based on a server without much resources. Don't 104; forget to tweak pm.* to fit your needs. 105; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand' 106; Note: This value is mandatory. 107pm.max_children = 5 108 109; The number of child processes created on startup. 110; Note: Used only when pm is set to 'dynamic' 111; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2 112pm.start_servers = 2 113 114; The desired minimum number of idle server processes. 115; Note: Used only when pm is set to 'dynamic' 116; Note: Mandatory when pm is set to 'dynamic' 117pm.min_spare_servers = 1 118 119; The desired maximum number of idle server processes. 120; Note: Used only when pm is set to 'dynamic' 121; Note: Mandatory when pm is set to 'dynamic' 122pm.max_spare_servers = 3 123 124; The number of seconds after which an idle process will be killed. 125; Note: Used only when pm is set to 'ondemand' 126; Default Value: 10s 127;pm.process_idle_timeout = 10s; 128 129; The number of requests each child process should execute before respawning. 130; This can be useful to work around memory leaks in 3rd party libraries. For 131; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS. 132; Default Value: 0 133;pm.max_requests = 500 134 135; The URI to view the FPM status page. If this value is not set, no URI will be 136; recognized as a status page. It shows the following informations: 137; pool - the name of the pool; 138; process manager - static, dynamic or ondemand; 139; start time - the date and time FPM has started; 140; start since - number of seconds since FPM has started; 141; accepted conn - the number of request accepted by the pool; 142; listen queue - the number of request in the queue of pending 143; connections (see backlog in listen(2)); 144; max listen queue - the maximum number of requests in the queue 145; of pending connections since FPM has started; 146; listen queue len - the size of the socket queue of pending connections; 147; idle processes - the number of idle processes; 148; active processes - the number of active processes; 149; total processes - the number of idle + active processes; 150; max active processes - the maximum number of active processes since FPM 151; has started; 152; max children reached - number of times, the process limit has been reached, 153; when pm tries to start more children (works only for 154; pm 'dynamic' and 'ondemand'); 155; Value are updated in real time. 156; Example output: 157; pool: www 158; process manager: static 159; start time: 01/Jul/2011:17:53:49 +0200 160; start since: 62636 161; accepted conn: 190460 162; listen queue: 0 163; max listen queue: 1 164; listen queue len: 42 165; idle processes: 4 166; active processes: 11 167; total processes: 15 168; max active processes: 12 169; max children reached: 0 170; 171; By default the status page output is formatted as text/plain. Passing either 172; 'html', 'xml' or 'json' in the query string will return the corresponding 173; output syntax. Example: 174; http://www.foo.bar/status 175; http://www.foo.bar/status?json 176; http://www.foo.bar/status?html 177; http://www.foo.bar/status?xml 178; 179; By default the status page only outputs short status. Passing 'full' in the 180; query string will also return status for each pool process. 181; Example: 182; http://www.foo.bar/status?full 183; http://www.foo.bar/status?json&full 184; http://www.foo.bar/status?html&full 185; http://www.foo.bar/status?xml&full 186; The Full status returns for each process: 187; pid - the PID of the process; 188; state - the state of the process (Idle, Running, ...); 189; start time - the date and time the process has started; 190; start since - the number of seconds since the process has started; 191; requests - the number of requests the process has served; 192; request duration - the duration in µs of the requests; 193; request method - the request method (GET, POST, ...); 194; request URI - the request URI with the query string; 195; content length - the content length of the request (only with POST); 196; user - the user (PHP_AUTH_USER) (or '-' if not set); 197; script - the main script called (or '-' if not set); 198; last request cpu - the %cpu the last request consumed 199; it's always 0 if the process is not in Idle state 200; because CPU calculation is done when the request 201; processing has terminated; 202; last request memory - the max amount of memory the last request consumed 203; it's always 0 if the process is not in Idle state 204; because memory calculation is done when the request 205; processing has terminated; 206; If the process is in Idle state, then informations are related to the 207; last request the process has served. Otherwise informations are related to 208; the current request being served. 209; Example output: 210; ************************ 211; pid: 31330 212; state: Running 213; start time: 01/Jul/2011:17:53:49 +0200 214; start since: 63087 215; requests: 12808 216; request duration: 1250261 217; request method: GET 218; request URI: /test_mem.php?N=10000 219; content length: 0 220; user: - 221; script: /home/fat/web/docs/php/test_mem.php 222; last request cpu: 0.00 223; last request memory: 0 224; 225; Note: There is a real-time FPM status monitoring sample web page available 226; It's available in: @EXPANDED_DATADIR@/fpm/status.html 227; 228; Note: The value must start with a leading slash (/). The value can be 229; anything, but it may not be a good idea to use the .php extension or it 230; may conflict with a real PHP file. 231; Default Value: not set 232;pm.status_path = /status 233 234; The ping URI to call the monitoring page of FPM. If this value is not set, no 235; URI will be recognized as a ping page. This could be used to test from outside 236; that FPM is alive and responding, or to 237; - create a graph of FPM availability (rrd or such); 238; - remove a server from a group if it is not responding (load balancing); 239; - trigger alerts for the operating team (24/7). 240; Note: The value must start with a leading slash (/). The value can be 241; anything, but it may not be a good idea to use the .php extension or it 242; may conflict with a real PHP file. 243; Default Value: not set 244;ping.path = /ping 245 246; This directive may be used to customize the response of a ping request. The 247; response is formatted as text/plain with a 200 response code. 248; Default Value: pong 249;ping.response = pong 250 251; The access log file 252; Default: not set 253;access.log = log/$pool.access.log 254 255; The access log format. 256; The following syntax is allowed 257; %%: the '%' character 258; %C: %CPU used by the request 259; it can accept the following format: 260; - %{user}C for user CPU only 261; - %{system}C for system CPU only 262; - %{total}C for user + system CPU (default) 263; %d: time taken to serve the request 264; it can accept the following format: 265; - %{seconds}d (default) 266; - %{miliseconds}d 267; - %{mili}d 268; - %{microseconds}d 269; - %{micro}d 270; %e: an environment variable (same as $_ENV or $_SERVER) 271; it must be associated with embraces to specify the name of the env 272; variable. Some exemples: 273; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e 274; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e 275; %f: script filename 276; %l: content-length of the request (for POST request only) 277; %m: request method 278; %M: peak of memory allocated by PHP 279; it can accept the following format: 280; - %{bytes}M (default) 281; - %{kilobytes}M 282; - %{kilo}M 283; - %{megabytes}M 284; - %{mega}M 285; %n: pool name 286; %o: output header 287; it must be associated with embraces to specify the name of the header: 288; - %{Content-Type}o 289; - %{X-Powered-By}o 290; - %{Transfert-Encoding}o 291; - .... 292; %p: PID of the child that serviced the request 293; %P: PID of the parent of the child that serviced the request 294; %q: the query string 295; %Q: the '?' character if query string exists 296; %r: the request URI (without the query string, see %q and %Q) 297; %R: remote IP address 298; %s: status (response code) 299; %t: server time the request was received 300; it can accept a strftime(3) format: 301; %d/%b/%Y:%H:%M:%S %z (default) 302; The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag 303; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t 304; %T: time the log has been written (the request has finished) 305; it can accept a strftime(3) format: 306; %d/%b/%Y:%H:%M:%S %z (default) 307; The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag 308; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t 309; %u: remote user 310; 311; Default: "%R - %u %t \"%m %r\" %s" 312;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%" 313 314; The log file for slow requests 315; Default Value: not set 316; Note: slowlog is mandatory if request_slowlog_timeout is set 317;slowlog = log/$pool.log.slow 318 319; The timeout for serving a single request after which a PHP backtrace will be 320; dumped to the 'slowlog' file. A value of '0s' means 'off'. 321; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) 322; Default Value: 0 323;request_slowlog_timeout = 0 324 325; The timeout for serving a single request after which the worker process will 326; be killed. This option should be used when the 'max_execution_time' ini option 327; does not stop script execution for some reason. A value of '0' means 'off'. 328; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) 329; Default Value: 0 330;request_terminate_timeout = 0 331 332; Set open file descriptor rlimit. 333; Default Value: system defined value 334;rlimit_files = 1024 335 336; Set max core size rlimit. 337; Possible Values: 'unlimited' or an integer greater or equal to 0 338; Default Value: system defined value 339;rlimit_core = 0 340 341; Chroot to this directory at the start. This value must be defined as an 342; absolute path. When this value is not set, chroot is not used. 343; Note: you can prefix with '$prefix' to chroot to the pool prefix or one 344; of its subdirectories. If the pool prefix is not set, the global prefix 345; will be used instead. 346; Note: chrooting is a great security feature and should be used whenever 347; possible. However, all PHP paths will be relative to the chroot 348; (error_log, sessions.save_path, ...). 349; Default Value: not set 350;chroot = 351 352; Chdir to this directory at the start. 353; Note: relative path can be used. 354; Default Value: current directory or / when chroot 355;chdir = /var/www 356 357; Redirect worker stdout and stderr into main error log. If not set, stdout and 358; stderr will be redirected to /dev/null according to FastCGI specs. 359; Note: on highloaded environement, this can cause some delay in the page 360; process time (several ms). 361; Default Value: no 362;catch_workers_output = yes 363 364; Clear environment in FPM workers 365; Prevents arbitrary environment variables from reaching FPM worker processes 366; by clearing the environment in workers before env vars specified in this 367; pool configuration are added. 368; Setting to "no" will make all environment variables available to PHP code 369; via getenv(), $_ENV and $_SERVER. 370; Default Value: yes 371;clear_env = no 372 373; Limits the extensions of the main script FPM will allow to parse. This can 374; prevent configuration mistakes on the web server side. You should only limit 375; FPM to .php extensions to prevent malicious users to use other extensions to 376; exectute php code. 377; Note: set an empty value to allow all extensions. 378; Default Value: .php 379;security.limit_extensions = .php .php3 .php4 .php5 .php7 380 381; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from 382; the current environment. 383; Default Value: clean env 384;env[HOSTNAME] = $HOSTNAME 385;env[PATH] = /usr/local/bin:/usr/bin:/bin 386;env[TMP] = /tmp 387;env[TMPDIR] = /tmp 388;env[TEMP] = /tmp 389 390; Additional php.ini defines, specific to this pool of workers. These settings 391; overwrite the values previously defined in the php.ini. The directives are the 392; same as the PHP SAPI: 393; php_value/php_flag - you can set classic ini defines which can 394; be overwritten from PHP call 'ini_set'. 395; php_admin_value/php_admin_flag - these directives won't be overwritten by 396; PHP call 'ini_set' 397; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no. 398 399; Defining 'extension' will load the corresponding shared extension from 400; extension_dir. Defining 'disable_functions' or 'disable_classes' will not 401; overwrite previously defined php.ini values, but will append the new value 402; instead. 403 404; Note: path INI options can be relative and will be expanded with the prefix 405; (pool, global or @prefix@) 406 407; Default Value: nothing is defined by default except the values in php.ini and 408; specified at startup with the -d argument 409;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com 410;php_flag[display_errors] = off 411;php_admin_value[error_log] = /var/log/fpm-php.www.log 412;php_admin_flag[log_errors] = on 413;php_admin_value[memory_limit] = 32M 414