Installing PHP __________________________________________________________________ Table of Contents Preface 1. General Installation Considerations 2. Installation on Windows systems Manual Installation Steps ActiveScript Microsoft IIS Apache 1.3.x on Microsoft Windows Apache 2.0.x on Microsoft Windows Sun, iPlanet and Netscape servers on Microsoft Windows OmniHTTPd Server Sambar Server on Microsoft Windows Xitami on Microsoft Windows Installation of extensions on Windows 3. Installation of PECL extensions Introduction to PECL Installations Downloading PECL extensions PECL for Windows users Compiling shared PECL extensions with the pecl command Compiling shared PECL extensions with phpize Compiling PECL extensions statically into PHP 4. Problems? Read the FAQ Other problems Bug reports 5. Runtime Configuration The configuration file How to change configuration settings 6. Installation FAQ __________________________________________________________________ Preface These installation instructions were generated from the HTML version of the PHP Manual so formatting and linking have been altered. See the online and updated version at: http://php.net/install.windows __________________________________________________________________ Chapter 1. General Installation Considerations Before starting the installation, first you need to know what do you want to use PHP for. There are three main fields you can use PHP, as described in the What can PHP do? section: * Websites and web applications (server-side scripting) * Command line scripting * Desktop (GUI) applications For the first and most common form, you need three things: PHP itself, a web server and a web browser. You probably already have a web browser, and depending on your operating system setup, you may also have a web server (e.g. Apache on Linux and MacOS X; IIS on Windows). You may also rent webspace at a company. This way, you don't need to set up anything on your own, only write your PHP scripts, upload it to the server you rent, and see the results in your browser. In case of setting up the server and PHP on your own, you have two choices for the method of connecting PHP to the server. For many servers PHP has a direct module interface (also called SAPI). These servers include Apache, Microsoft Internet Information Server, Netscape and iPlanet servers. Many other servers have support for ISAPI, the Microsoft module interface (OmniHTTPd for example). If PHP has no module support for your web server, you can always use it as a CGI or FastCGI processor. This means you set up your server to use the CGI executable of PHP to process all PHP file requests on the server. If you are also interested to use PHP for command line scripting (e.g. write scripts autogenerating some images for you offline, or processing text files depending on some arguments you pass to them), you always need the command line executable. For more information, read the section about writing command line PHP applications. In this case, you need no server and no browser. With PHP you can also write desktop GUI applications using the PHP-GTK extension. This is a completely different approach than writing web pages, as you do not output any HTML, but manage Windows and objects within them. For more information about PHP-GTK, please visit the site dedicated to this extension. PHP-GTK is not included in the official PHP distribution. From now on, this section deals with setting up PHP for web servers on Unix and Windows with server module interfaces and CGI executables. You will also find information on the command line executable in the following sections. PHP source code and binary distributions for Windows can be found at http://www.php.net/downloads.php. We recommend you to choose a mirror nearest to you for downloading the distributions. __________________________________________________________________ Chapter 2. Installation on Windows systems This section applies to Windows 98/Me and Windows NT/2000/XP/2003. PHP will not work on 16 bit platforms such as Windows 3.1 and sometimes we refer to the supported Windows platforms as Win32. Windows 95 is no longer supported as of PHP 4.3.0. If you have Microsoft Visual Studio, you can also build PHP from the original source code. Once you have PHP installed on your Windows system, you may also want to load various extensions for added functionality. Warning There are several all-in-one installers over the Internet, but none of those are endorsed by PHP.net, as we believe that the manual installation is the best choice to have your system secure and optimised. __________________________________________________________________ Manual Installation Steps This install guide will help you manually install and configure PHP with a web server on Microsoft Windows. To get started you'll need to download the zip binary distribution from the downloads page at http://www.php.net/downloads.php. Although there are many all-in-one installation kits, we recommend you take the time to setup PHP yourself as this will provide you with a better understanding of the system, and enables you to install PHP extensions easily when needed. Upgrading from a previous PHP version: Previous editions of the manual suggest moving various ini and DLL files into your SYSTEM (i.e. C:\WINDOWS) folder and while this simplifies the installation procedure it makes upgrading difficult. We advise you remove all of these files (like php.ini and PHP related DLLs from the Windows SYSTEM folder) before moving on with a new PHP installation. Be sure to backup these files as you might break the entire system. The old php.ini might be useful in setting up the new PHP as well. And as you'll soon learn, the preferred method for installing PHP is to keep all PHP related files in one directory and have this directory available to your systems PATH. MDAC requirements: If you use Microsoft Windows 98/NT4 download the latest version of the Microsoft Data Access Components (MDAC) for your platform. MDAC is available at http://msdn.microsoft.com/data/. This requirement exists because ODBC is built into the distributed Windows binaries. The following steps should be completed on all installations before any server specific instructions are performed: Extract the distribution file into a directory of your choice. If you are installing PHP 4, extract to C:\, as the zip file expands to a foldername like php-4.3.7-Win32. If you are installing PHP 5, extract to C:\php as the zip file doesn't expand as in PHP 4. You may choose a different location but do not have spaces in the path (like C:\Program Files\PHP) as some web servers will crash if you do. The directory structure extracted from the zip is different for PHP versions 4 and 5 and look like as follows: Example 2-2. PHP 5 package structure c:\php | +--dev | | | |-php5ts.lib | +--ext -- extension DLLs for PHP | | | |-php_bz2.dll | | | |-php_cpdf.dll | | | |-.. | +--extras | | | +--mibs -- support files for SNMP | | | +--openssl -- support files for Openssl | | | +--pdf-related -- support files for PDF | | | |-mime.magic | +--pear -- initial copy of PEAR | | |-go-pear.bat -- PEAR setup script | |-fdftk.dll | |-.. | |-php-cgi.exe -- CGI executable | |-php-win.exe -- executes scripts without an opened command prompt | |-php.exe -- CLI executable - ONLY for command line scripting | |-.. | |-php.ini-development -- development php.ini settings | |-php.ini-production -- recommended php.ini settings for production | |-php5activescript.dll | |-php5apache.dll | |-php5apache2.dll | |-.. | |-php5ts.dll -- core PHP DLL | |-... Notice the differences and similarities. Both PHP 4 and PHP 5 have a CGI executable, a CLI executable, and server modules, but they are located in different folders and/or have different names. While PHP 4 packages have the server modules in the sapi folder, PHP 5 distributions have no such directory and instead they're in the PHP folder root. The supporting DLLs for the PHP 5 extensions are also not in a separate directory. Note: In PHP 4, you should move all files located in the dll and sapi folders to the main folder (e.g. C:\php). Here is a list of server modules shipped with PHP 5: * sapi/php5apache2_2.dll - Apache 2.2.x module. * sapi/php5apache.dll (php5apache.dll) - Apache 1.x module * sapi/php5apache2.dll (php5apache2.dll) - - Apache 2.0.x module. * sapi/php5isapi.dll - ISAPI Module for ISAPI compliant web servers like IIS 5.0 or newer. However the FCGI SAPI is recommended with IIS * sapi/php5nsapi.dll (php5nsapi.dll) - Sun/iPlanet/Netscape server module. Server modules provide significantly better performance and additional functionality compared to the CGI binary. The FastCGI is significantly more stable and can be faster than the ISAPI module with IIS. The CLI version is designed to let you use PHP for command line scripting. More information about CLI is available in the chapter about using PHP from the command line. Warning The SAPI modules have been significantly improved as of the 4.1 release, however, in older systems you may encounter server errors or other server modules failing, such as ASP. The CGI and CLI binaries, and the web server modules all require the php5ts.dll file to be available to them. You have to make sure that this file can be found by your PHP installation. The search order for this DLL is as follows: * The same directory from where php.exe is called, or in case you use a SAPI module, the web server's directory (e.g. C:\Program Files\Apache Group\Apache2\bin). * Any directory in your Windows PATH environment variable. To make php5ts.dll available you have three options: copy the file to the Windows system directory, copy the file to the web server's directory, or add your PHP directory, C:\php to the PATH. For better maintenance, we advise you to follow the last option, add C:\php to the PATH, because it will be simpler to upgrade PHP in the future. Read more about how to add your PHP directory to PATH in the corresponding FAQ entry (and then don't forget to restart the computer - logoff isn't enough). The next step is to set up a valid configuration file for PHP, php.ini. There are two ini files distributed in the zip file, php.ini-development and php.ini-production. We advise you to use php.ini-production, because we optimized the default settings in this file for performance, and security. Read this well documented file carefully because it has changes from php.ini-production that will drastically affect your setup. Some examples are display_errors being off and magic_quotes_gpc being off. In addition to reading these, study the ini settings and set every element manually yourself. If you would like to achieve the best security, then this is the way for you, although PHP works fine with these default ini files. Copy your chosen ini-file to a directory that PHP is able to find and rename it to php.ini. PHP searches for php.ini in the locations described in the Section called The configuration file in Chapter 5 section. If you are running Apache 2, the simpler option is to use the PHPIniDir directive (read the installation on Apache 2 page), otherwise your best option is to set the PHPRC environment variable. This process is explained in the following FAQ entry. Note: If you're using NTFS on Windows NT, 2000, XP or 2003, make sure that the user running the web server has read permissions to your php.ini (e.g. make it readable by Everyone). The following steps are optional: * Edit your new php.ini file. If you plan to use OmniHTTPd, do not follow the next step. Set the doc_root to point to your web servers document_root. For example: doc_root = c:\inetpub\wwwroot // for IIS doc_root = c:\apache\htdocs // for Apache * Choose the extensions you would like to load when PHP starts. See the section about Windows extensions, about how to set up one, and what is already built in. Note that on a new installation it is advisable to first get PHP working and tested without any extensions before enabling them in php.ini. PHP is now setup on your system. The next step is to choose a web server, and enable it to run PHP. Choose a web server from the table of contents. __________________________________________________________________ ActiveScript This section contains notes specific to the ActiveScript installation. ActiveScript is a Windows only SAPI that enables you to use PHP script in any ActiveScript compliant host, like Windows Script Host, ASP/ASP.NET, Windows Script Components or Microsoft Scriptlet control. As of PHP 5.0.1, ActiveScript has been moved to the PECL repository. The DLL for this PECL extension may be downloaded from either the PHP Downloads page or from http://pecl4win.php.net/ Note: You should read the manual installation steps first! After installing PHP, you should download the ActiveScript DLL (php5activescript.dll) and place it in the main PHP folder (e.g. C:\php). After having all the files needed, you must register the DLL on your system. To achieve this, open a Command Prompt window (located in the Start Menu). Then go to your PHP directory by typing something like cd C:\php. To register the DLL just type regsvr32 php5activescript.dll. To test if ActiveScript is working, create a new file, named test.wsf (the extension is very important) and type: Save and double-click on the file. If you receive a little window saying "Hello World!" you're done. Note: In PHP 4, the engine was named 'ActivePHP', so if you are using PHP 4, you should replace 'PHPScript' with 'ActivePHP' in the above example. Note: ActiveScript doesn't use the default php.ini file. Instead, it will look only in the same directory as the .exe that caused it to load. You should create php-activescript.ini and place it in that folder, if you wish to load extensions, etc. __________________________________________________________________ Microsoft IIS This section contains notes and hints specific to IIS (Microsoft Internet Information Server). Warning By using the CGI setup, your server is open to several possible attacks. Please read our CGI security section to learn how to defend yourself from those attacks. __________________________________________________________________ General considerations for all installations of PHP with IIS * First, read the Manual Installation Instructions. Do not skip this step as it provides crucial information for installing PHP on Windows. * CGI users must set the cgi.force_redirect PHP directive to 0 inside php.ini. Read the faq on cgi.force_redirect for important details. Also, CGI users may want to set the cgi.redirect_status_env directive. When using directives, be sure these directives aren't commented out inside php.ini. * The PHP 4 CGI is named php.exe while in PHP 5 it's php-cgi.exe. In PHP 5, php.exe is the CLI, and not the CGI. * Modify the Windows PATH environment variable to include the PHP directory. This way the PHP DLL files and PHP executables can all remain in the PHP directory without cluttering up the Windows system directory. For more details, see the FAQ on Setting the PATH. * The IIS user (usually IUSR_MACHINENAME) needs permission to read various files and directories, such as php.ini, docroot, and the session tmp directory. * Be sure the extension_dir and doc_root PHP directives are appropriately set in php.ini. These directives depend on the system that PHP is being installed on. In PHP 4, the extension_dir is extensions while with PHP 5 it's ext. So, an example PHP 5 extensions_dir value is "c:\php\ext" and an example IIS doc_root value is "c:\Inetpub\wwwroot". * PHP extension DLL files, such as php_mysql.dll and php_curl.dll, are found in the zip package of the PHP download. In PHP 5, many extensions are part of PECL and can be downloaded in the "Collection of PECL modules" package. Files such as php_zip.dll and php_ssh2.dll. Download PHP files here. * When defining the executable, the 'check that file exists' box may also be checked. For a small performance penalty, the IIS will check that the script file exists and sort out authentication before firing up PHP. This means that the web server will provide sensible 404 style error messages instead of CGI errors complaining that PHP did not output any data. __________________________________________________________________ Windows NT/200x/XP and IIS 4 or newer PHP may be installed as a CGI binary, or with the ISAPI module. In either case, you need to start the Microsoft Management Console (may appear as 'Internet Services Manager', either in your Windows NT 4.0 Option Pack branch or the Control Panel=>Administrative Tools under Windows 2000/XP). Then right click on your Web server node (this will most probably appear as 'Default Web Server'), and select 'Properties'. If you want to use the CGI binary, do the following: * Under 'Home Directory', 'Virtual Directory', or 'Directory', do the following: * Change the Execute Permissions to 'Scripts only' * Click on the 'Configuration' button, and choose the Application Mappings tab. Click Add and set the Executable path to the appropriate CGI file. An example PHP 5 value is: C:\php\php-cgi.exe Supply .php as the extension. Leave 'Method exclusions' blank, and check the 'Script engine' checkbox. Now, click OK a few times. * Set up the appropriate security. (This is done in Internet Service Manager), and if your NT Server uses NTFS file system, add execute rights for I_USR_ to the directory that contains php.exe / php-cgi.exe. To use the ISAPI module, do the following: * If you don't want to perform HTTP Authentication using PHP, you can (and should) skip this step. Under ISAPI Filters, add a new ISAPI filter. Use PHP as the filter name, and supply a path to the php5isapi.dll. * Under 'Home Directory', 'Virtual Directory', or 'Directory', do the following: * Change the Execute Permissions to 'Scripts only' * Click on the 'Configuration' button, and choose the Application Mappings tab. Click Add and set the Executable path to the appropriate ISAPI DLL. An example PHP 5 value is: C:\php\php5isapi.dll Supply .php as the extension. Leave 'Method exclusions' blank, and check the 'Script engine' checkbox. Now, click OK a few times. * Stop IIS completely (NET STOP iisadmin) * Start IIS again (NET START w3svc) With IIS 6 (2003 Server), open up the IIS Manager, go to Web Service Extensions, choose "Add a new Web service extension", enter in a name such as PHP, choose the Add button and for the value browse to either the ISAPI file (php5isapi.dll) or CGI (php.exe or php-cgi.exe) then check "Set extension status to Allowed" and click OK. In order to use index.php as a default content page, do the following: From within the Documents tab, choose Add. Type in index.php and click OK. Adjust the order by choosing Move Up or Move Down. This is similar to setting DirectoryIndex with Apache. The steps above must be repeated for each extension that is to be associated with PHP scripts. .php is the most common although .php3 may be required for legacy applications. If you experience 100% CPU usage after some time, turn off the IIS setting Cache ISAPI Application. __________________________________________________________________ Windows and IIS See http://www.php.net/install.windows __________________________________________________________________ Apache 1.3.x on Microsoft Windows This section contains notes and hints specific to Apache 1.3.x installs of PHP on Microsoft Windows systems. There are also instructions and notes for Apache 2 on a separate page. Note: Please read the manual installation steps first! There are two ways to set up PHP to work with Apache 1.3.x on Windows. One is to use the CGI binary (php.exe for PHP 4 and php-cgi.exe for PHP 5), the other is to use the Apache Module DLL. In either case you need to edit your httpd.conf to configure Apache to work with PHP, and then restart the server. It is worth noting here that now the SAPI module has been made more stable under Windows, we recommend it's use above the CGI binary, since it is more transparent and secure. Although there can be a few variations of configuring PHP under Apache, these are simple enough to be used by the newcomer. Please consult the Apache Documentation for further configuration directives. After changing the configuration file, remember to restart the server, for example, NET STOP APACHE followed by NET START APACHE, if you run Apache as a Windows Service, or use your regular shortcuts. Note: Remember that when adding path values in the Apache configuration files on Windows, all backslashes such as c:\directory\file.ext must be converted to forward slashes, as c:/directory/file.ext. A trailing slash may also be necessary for directories. __________________________________________________________________ Installing as an Apache module You should add the following lines to your Apache httpd.conf file: Example 2-3. PHP as an Apache 1.3.x module This assumes PHP is installed to c:\php. Adjust the path if this is not the case. For PHP 5: # Add to the end of the LoadModule section LoadModule php5_module "C:/php/php5apache.dll" # Add to the end of the AddModule section AddModule mod_php5.c For both: # Add this line inside the conditional brace AddType application/x-httpd-php .php # For syntax highlighted .phps files, also add AddType application/x-httpd-php-source .phps __________________________________________________________________ Installing as a CGI binary If you unzipped the PHP package to C:\php\ as described in the Manual Installation Steps section, you need to insert these lines to your Apache configuration file to set up the CGI binary: Example 2-4. PHP and Apache 1.3.x as CGI ScriptAlias /php/ "c:/php/" AddType application/x-httpd-php .php # For PHP 4 Action application/x-httpd-php "/php/php.exe" # For PHP 5 Action application/x-httpd-php "/php/php-cgi.exe" # specify the directory where php.ini is SetEnv PHPRC C:/php Note that the second line in the list above can be found in the actual versions of httpd.conf, but it is commented out. Remember also to substitute the c:/php/ for your actual path to PHP. Warning By using the CGI setup, your server is open to several possible attacks. Please read our CGI security section to learn how to defend yourself from those attacks. If you would like to present PHP source files syntax highlighted, there is no such convenient option as with the module version of PHP. If you chose to configure Apache to use PHP as a CGI binary, you will need to use the highlight_file() function. To do this simply create a PHP script file and add this code: . __________________________________________________________________ Apache 2.0.x on Microsoft Windows This section contains notes and hints specific to Apache 2.0.x installs of PHP on Microsoft Windows systems. We also have instructions and notes for Apache 1.3.x users on a separate page. Note: You should read the manual installation steps first! Apache 2.2.x Support: Users of Apache 2.2.x may use the documentation below except the appropriate DLL file is named php5apache2_2.dll and it only exists as of PHP 5.2.0. See also http://snaps.php.net/ Warning We do not recommend using a threaded MPM in production with Apache2. Use the prefork MPM instead, or use Apache1. For information on why, read the related FAQ entry on using Apache2 with a threaded MPM You are highly encouraged to take a look at the Apache Documentation to get a basic understanding of the Apache 2.0.x Server. Also consider to read the Windows specific notes for Apache 2.0.x before reading on here. PHP and Apache 2.0.x compatibility notes: The following versions of PHP are known to work with the most recent version of Apache 2.0.x: * PHP 4.3.0 or later available at http://www.php.net/downloads.php. * the latest stable development version. Get the source code http://snaps.php.net/php5-latest.tar.gz or download binaries for Windows http://snaps.php.net/win32/php5-win32-latest.zip. * a prerelease version downloadable from http://qa.php.net/. * you have always the option to obtain PHP through SVN. These versions of PHP are compatible to Apache 2.0.40 and later. Apache 2.0 SAPI-support started with PHP 4.2.0. PHP 4.2.3 works with Apache 2.0.39, don't use any other version of Apache with PHP 4.2.3. However, the recommended setup is to use PHP 4.3.0 or later with the most recent version of Apache2. All mentioned versions of PHP will work still with Apache 1.3.x. Warning Apache 2.0.x is designed to run on Windows NT 4.0, Windows 2000 or Windows XP. At this time, support for Windows 9x is incomplete. Apache 2.0.x is not expected to work on those platforms at this time. Download the most recent version of Apache 2.0.x and a fitting PHP version. Follow the Manual Installation Steps and come back to go on with the integration of PHP and Apache. There are two ways to set up PHP to work with Apache 2.0.x on Windows. One is to use the CGI binary the other is to use the Apache module DLL. In either case you need to edit your httpd.conf to configure Apache to work with PHP and then restart the server. Note: Remember that when adding path values in the Apache configuration files on Windows, all backslashes such as c:\directory\file.ext must be converted to forward slashes, as c:/directory/file.ext. A trailing slash may also be necessary for directories. __________________________________________________________________ Installing as a CGI binary You need to insert these three lines to your Apache httpd.conf configuration file to set up the CGI binary: Example 2-5. PHP and Apache 2.0 as CGI ScriptAlias /php/ "c:/php/" AddType application/x-httpd-php .php # For PHP 4 Action application/x-httpd-php "/php/php.exe" # For PHP 5 Action application/x-httpd-php "/php/php-cgi.exe" Warning By using the CGI setup, your server is open to several possible attacks. Please read our CGI security section to learn how to defend yourself from those attacks. __________________________________________________________________ Installing as an Apache module You need to insert these two lines to your Apache httpd.conf configuration file to set up the PHP module for Apache 2.0: Example 2-6. PHP and Apache 2.0 as Module # For PHP 5 do something like this: LoadModule php5_module "c:/php/php5apache2.dll" AddType application/x-httpd-php .php # configure the path to php.ini PHPIniDir "C:/php" Note: Remember to substitute your actual path to PHP for the c:/php/ in the above examples. Take care to use either php5apache2.dll in your LoadModule directive and not php5apache.dll as the latter ones are designed to run with Apache 1.3.x. Note: If you want to use content negotiation, read related FAQ. Warning Don't mix up your installation with DLL files from different PHP versions. You have the only choice to use the DLL's and extensions that ship with your downloaded PHP version. __________________________________________________________________ Sun, iPlanet and Netscape servers on Microsoft Windows This section contains notes and hints specific to Sun Java System Web Server, Sun ONE Web Server, iPlanet and Netscape server installs of PHP on Windows. From PHP 4.3.3 on you can use PHP scripts with the NSAPI module to generate custom directory listings and error pages. Additional functions for Apache compatibility are also available. For support in current web servers read the note about subrequests. __________________________________________________________________ CGI setup on Sun, iPlanet and Netscape servers To install PHP as a CGI handler, do the following: * Copy php5ts.dll to your systemroot (the directory where you installed Windows) * Make a file association from the command line. Type the following two lines: assoc .php=PHPScript ftype PHPScript=c:\php\php.exe %1 %* * In the Netscape Enterprise Administration Server create a dummy shellcgi directory and remove it just after (this step creates 5 important lines in obj.conf and allow the web server to handle shellcgi scripts). * In the Netscape Enterprise Administration Server create a new mime type (Category: type, Content-Type: magnus-internal/shellcgi, File Suffix:php). * Do it for each web server instance you want PHP to run More details about setting up PHP as a CGI executable can be found here: http://benoit.noss.free.fr/php/install-php.html __________________________________________________________________ NSAPI setup on Sun, iPlanet and Netscape servers To install PHP with NSAPI, do the following: * Copy php5ts.dll to your systemroot (the directory where you installed Windows) * Make a file association from the command line. Type the following two lines: assoc .php=PHPScript ftype PHPScript=c:\php\php.exe %1 %* * In the Netscape Enterprise Administration Server create a new mime type (Category: type, Content-Type: magnus-internal/x-httpd-php, File Suffix: php). * Edit magnus.conf (for servers >= 6) or obj.conf (for servers < 6) and add the following: You should place the lines after mime types init. Init fn="load-modules" funcs="php5_init,php5_execute,php5_auth_trans" shlib="c:/ php/sapi/php5nsapi.dll" Init fn="php5_init" LateInit="yes" errorString="Failed to initialise PHP!" [php_ ini="c:/path/to/php.ini"] The php_ini parameter is optional but with it you can place your php.ini in your web server configuration directory. * Configure the default object in obj.conf (for virtual server classes [Sun Web Server 6.0+] in their vserver.obj.conf): In the section, place this line necessarily after all 'ObjectType' and before all 'AddLog' lines: Service fn="php5_execute" type="magnus-internal/x-httpd-php" [inikey=value inike y=value ...] As additional parameters you can add some special php.ini-values, for example you can set a docroot="/path/to/docroot" specific to the context php5_execute is called. For boolean ini-keys please use 0/1 as value, not "On","Off",... (this will not work correctly), e.g. zlib.output_compression=1 instead of zlib.output_compression="On" * This is only needed if you want to configure a directory that only consists of PHP scripts (same like a cgi-bin directory): ObjectType fn="force-type" type="magnus-internal/x-httpd-php" Service fn=php5_execute [inikey=value inikey=value ...] After that you can configure a directory in the Administration server and assign it the style x-httpd-php. All files in it will get executed as PHP. This is nice to hide PHP usage by renaming files to .html. * Restart your web service and apply changes * Do it for each web server instance you want PHP to run Note: More details about setting up PHP as an NSAPI filter can be found here: http://benoit.noss.free.fr/php/install-php4.html Note: The stacksize that PHP uses depends on the configuration of the web server. If you get crashes with very large PHP scripts, it is recommended to raise it with the Admin Server (in the section "MAGNUS EDITOR"). __________________________________________________________________ CGI environment and recommended modifications in php.ini Important when writing PHP scripts is the fact that Sun JSWS/Sun ONE WS/iPlanet/Netscape is a multithreaded web server. Because of that all requests are running in the same process space (the space of the web server itself) and this space has only one environment. If you want to get CGI variables like PATH_INFO, HTTP_HOST etc. it is not the correct way to try this in the old PHP 3.x way with getenv() or a similar way (register globals to environment, $_ENV). You would only get the environment of the running web server without any valid CGI variables! Note: Why are there (invalid) CGI variables in the environment? Answer: This is because you started the web server process from the admin server which runs the startup script of the web server, you wanted to start, as a CGI script (a CGI script inside of the admin server!). This is why the environment of the started web server has some CGI environment variables in it. You can test this by starting the web server not from the administration server. Use the command line as root user and start it manually - you will see there are no CGI-like environment variables. __________________________________________________________________ Special use for error pages or self-made directory listings (PHP >= 4.3.3) You can use PHP to generate the error pages for "404 Not Found" or similar. Add the following line to the object in obj.conf for every error page you want to overwrite: Error fn="php5_execute" code=XXX script="/path/to/script.php" [inikey=value inik ey=value...] where XXX is the HTTP error code. Please delete any other Error directives which could interfere with yours. If you want to place a page for all errors that could exist, leave the code parameter out. Your script can get the HTTP status code with $_SERVER['ERROR_TYPE']. Another possibility is to generate self-made directory listings. Just create a PHP script which displays a directory listing and replace the corresponding default Service line for type="magnus-internal/directory" in obj.conf with the following: Service fn="php5_execute" type="magnus-internal/directory" script="/path/to/scri pt.php" [inikey=value inikey=value...] For both error and directory listing pages the original URI and translated URI are in the variables $_SERVER['PATH_INFO'] and $_SERVER['PATH_TRANSLATED']. __________________________________________________________________ Note about nsapi_virtual() and subrequests (PHP >= 4.3.3) The NSAPI module now supports the nsapi_virtual() function (alias: virtual()) to make subrequests on the web server and insert the result in the web page. The problem is, that this function uses some undocumented features from the NSAPI library. Under Unix this is not a problem, because the module automatically looks for the needed functions and uses them if available. If not, nsapi_virtual() is disabled. Under Windows limitations in the DLL handling need the use of a automatic detection of the most recent ns-httpdXX.dll file. This is tested for servers till version 6.1. If a newer version of the Sun server is used, the detection fails and nsapi_virtual() is disabled. If this is the case, try the following: Add the following parameter to php5_init in magnus.conf/obj.conf: Init fn=php5_init ... server_lib="ns-httpdXX.dll" where XX is the correct DLL version number. To get it, look in the server-root for the correct DLL name. The DLL with the biggest filesize is the right one. You can check the status by using the phpinfo() function. Note: But be warned: Support for nsapi_virtual() is EXPERIMENTAL!!! __________________________________________________________________ OmniHTTPd Server This section contains notes and hints specific to OmniHTTPd on Windows. Note: You should read the manual installation steps first! Warning By using the CGI setup, your server is open to several possible attacks. Please read our CGI security section to learn how to defend yourself from those attacks. You need to complete the following steps to make PHP work with OmniHTTPd. This is a CGI executable setup. SAPI is supported by OmniHTTPd, but some tests have shown that it is not so stable to use PHP as an ISAPI module. Important for CGI users: Read the faq on cgi.force_redirect for important details. This directive needs to be set to 0. 1. Install OmniHTTPd server. 2. Right click on the blue OmniHTTPd icon in the system tray and select Properties 3. Click on Web Server Global Settings 4. On the 'External' tab, enter: virtual = .php | actual = c:\php\php.exe (use php-cgi.exe if installing PHP 5), and use the Add button. 5. On the Mime tab, enter: virtual = wwwserver/stdcgi | actual = .php, and use the Add button. 6. Click OK Repeat steps 2 - 6 for each extension you want to associate with PHP. __________________________________________________________________ Xitami on Microsoft Windows This section contains notes and hints specific to Xitami on Windows. Note: You should read the manual installation steps first! This list describes how to set up the PHP CGI binary to work with Xitami on Windows. Important for CGI users: Read the faq on cgi.force_redirect for important details. This directive needs to be set to 0. If you want to use $_SERVER['PHP_SELF'] you have to enable the cgi.fix_pathinfo directive. Warning By using the CGI setup, your server is open to several possible attacks. Please read our CGI security section to learn how to defend yourself from those attacks. * Make sure the web server is running, and point your browser to xitamis admin console (usually http://127.0.0.1/admin), and click on Configuration. * Navigate to the Filters, and put the extension which PHP should parse (i.e. .php) into the field File extensions (.xxx). * In Filter command or script put the path and name of your PHP CGI executable i.e. C:\php\php-cgi.exe. * Press the 'Save' icon. * Restart the server to reflect changes. __________________________________________________________________ Installation of extensions on Windows After installing PHP and a web server on Windows, you will probably want to install some extensions for added functionality. You can choose which extensions you would like to load when PHP starts by modifying your php.ini. You can also load a module dynamically in your script using dl(). The DLLs for PHP extensions are prefixed with php_. Many extensions are built into the Windows version of PHP. This means additional DLL files, and the extension directive, are not used to load these extensions. The Windows PHP Extensions table lists extensions that require, or used to require, additional PHP DLL files. Here's a list of built in extensions: In PHP 5 (updated PHP 5.0.4), the following changes exist. Built in: DOM, LibXML, Iconv, SimpleXML, SPL and SQLite. And the following are no longer built in: MySQL and Overload. The default location PHP searches for extensions is C:\php5 in PHP 5. To change this setting to reflect your setup of PHP edit your php.ini file: * You will need to change the extension_dir setting to point to the directory where your extensions lives, or where you have placed your php_*.dll files. For example: extension_dir = C:\php\extensions * Enable the extension(s) in php.ini you want to use by uncommenting the extension=php_*.dll lines in php.ini. This is done by deleting the leading ; from the extension you want to load. Example 2-8. Enable Bzip2 extension for PHP-Windows // change the following line from ... ;extension=php_bz2.dll // ... to extension=php_bz2.dll * Some of the extensions need extra DLLs to work. Couple of them can be found in the distribution package, in in the main folder in PHP 5, but some, for example Oracle (php_oci8.dll) require DLLs which are not bundled with the distribution package. * Some of these DLLs are not bundled with the PHP distribution. See each extensions documentation page for details. Also, read the manual section titled Installation of PECL extensions for details on PECL. An increasingly large number of PHP extensions are found in PECL, and these extensions require a separate download. Note: If you are running a server module version of PHP remember to restart your web server to reflect your changes to php.ini. The following table describes some of the extensions available and required additional dlls. Table 2-1. PHP Extensions Extension Description Notes php_bz2.dll bzip2 compression functions None php_calendar.dll Calendar conversion functions php_cpdf.dll ClibPDF functions None php_crack.dll Crack functions None php_ctype.dll ctype family functions php_curl.dll CURL, Client URL library functions Requires: libeay32.dll, ssleay32.dll (bundled) php_db.dll DBM functions Deprecated. Use DBA instead (php_dba.dll) php_dba.dll DBA: DataBase (dbm-style) Abstraction layer functions None php_dbase.dll dBase functions None php_dbx.dll dbx functions php_exif.dll EXIF functions php_mbstring.dll. And, php_exif.dll must be loaded after php_mbstring.dll in php.ini. php_fdf.dll FDF: Forms Data Format functions. Requires: fdftk.dll (bundled) php_filepro.dll filePro functions Read-only access php_ftp.dll FTP functions php_gd2.dll GD library image functions GD2 php_gettext.dll Gettext functions, requires libintl-1.dll, iconv.dll (bundled). php_iconv.dll ICONV characterset conversion Requires: iconv.dll php_imap.dll IMAP POP3 and NNTP functions None php_interbase.dll InterBase functions Requires: gds32.dll (bundled) php_ldap.dll LDAP functions requires libeay32.dll, ssleay32.dll (bundled) php_mbstring.dll Multi-Byte String functions None php_mcrypt.dll Mcrypt Encryption functions Requires: libmcrypt.dll php_mime_magic.dll Mimetype functions Requires: magic.mime (bundled) php_ming.dll Ming functions for Flash None php_msql.dll mSQL functions Requires: msql.dll (bundled) php_mssql.dll MSSQL functions Requires: ntwdblib.dll (bundled) php_mysql.dll MySQL functions PHP >= 5.0.0, requires libmysql.dll (bundled) php_mysqli.dll MySQLi functions PHP >= 5.0.0, requires libmysql.dll (libmysqli.dll in PHP <= 5.0.2) (bundled) php_oci8.dll Oracle 8 functions Requires: Oracle 8.1+ client libraries php_openssl.dll OpenSSL functions Requires: libeay32.dll (bundled) php_oracle.dll Oracle functions Requires: Oracle 7 client libraries php_pgsql.dll PostgreSQL functions None php_printer.dll Printer functions None php_shmop.dll Shared Memory functions None php_snmp.dll SNMP get and walk functions NT only! php_soap.dll SOAP functions PHP >= 5.0.0 php_sockets.dll Socket functions None php_sybase_ct.dll Sybase functions Requires: Sybase client libraries php_tidy.dll Tidy functions PHP >= 5.0.0 php_tokenizer.dll Tokenizer functions Built in since PHP 4.3.0 php_xmlrpc.dll XML-RPC functions PHP >= 4.2.1 requires: iconv.dll (bundled) php_xslt.dll XSLT requires libxslt.dll, iconv.dll (bundled). php_zip.dll Zip File functions php_zlib.dll ZLib compression functions __________________________________________________________________ Chapter 3. Installation of PECL extensions Introduction to PECL Installations PECL is a repository of PHP extensions that are made available to you via the PEAR packaging system. This section of the manual is intended to demonstrate how to obtain and install PECL extensions. These instructions assume /your/phpsrcdir/ is the path to the PHP source distribution, and that extname is the name of the PECL extension. Adjust accordingly. These instructions also assume a familiarity with the pear command. The information in the PEAR manual for the pear command also applies to the pecl command. To be useful, a shared extension must be built, installed, and loaded. The methods described below provide you with various instructions on how to build and install the extensions, but they do not automatically load them. Extensions can be loaded by adding an extension directive. To this php.ini file, or through the use of the dl() function. When building PHP modules, it's important to have known-good versions of the required tools (autoconf, automake, libtool, etc.) See the SVN Instructions for details on the required tools, and required versions. __________________________________________________________________ Downloading PECL extensions There are several options for downloading PECL extensions, such as: * http://pecl.php.net The PECL web site contains information about the different extensions that are offered by the PHP Development Team. The information available here includes: ChangeLog, release notes, requirements and other similar details. * pecl download extname PECL extensions that have releases listed on the PECL web site are available for download and installation using the pecl command. Specific revisions may also be specified. * SVN Most PECL extensions also reside in SVN. A web-based view may be seen at http://svn.php.net/pecl/. To download straight from SVN, the following sequence of commands may be used. $ svn co http://svn.php.net/repository/pecl//trunk * Windows downloads Windows users may find compiled PECL binaries by downloading the Collection of PECL modules from the PHP Downloads page, or by retrieving a PECL Snapshot or an extension DLL on PECL4WIN. To compile PHP under Windows, read the appropriate chapter. __________________________________________________________________ PECL for Windows users As with any other PHP extension DLL, installation is as simple as copying the PECL extension DLLs into the extension_dir folder and loading them from php.ini. For example, add the following line to your php.ini: extension=php_extname.dll After doing this, restart the web server. __________________________________________________________________ Compiling shared PECL extensions with the pecl command PECL makes it easy to create shared PHP extensions. Using the pecl command, do the following: $ pecl install extname This will download the source for extname, compile, and install extname.so into your extension_dir. extname.so may then be loaded via php.ini By default, the pecl command will not install packages that are marked with the alpha or beta state. If no stable packages are available, you may install a beta package using the following command: $ pecl install extname-beta You may also install a specific version using this variant: $ pecl install extname-0.1 __________________________________________________________________ Compiling shared PECL extensions with phpize Sometimes, using the pecl installer is not an option. This could be because you're behind a firewall, or it could be because the extension you want to install is not available as a PECL compatible package, such as unreleased extensions from SVN. If you need to build such an extension, you can use the lower-level build tools to perform the build manually. The phpize command is used to prepare the build environment for a PHP extension. In the following sample, the sources for an extension are in a directory named extname: $ cd extname $ phpize $ ./configure $ make # make install A successful install will have created extname.so and put it into the PHP extensions directory. You'll need to and adjust php.ini and add an extension=extname.so line before you can use the extension. If the system is missing the phpize command, and precompiled packages (like RPM's) are used, be sure to also install the appropriate devel version of the PHP package as they often include the phpize command along with the appropriate header files to build PHP and its extensions. Execute phpize --help to display additional usage information. __________________________________________________________________ Compiling PECL extensions statically into PHP You might find that you need to build a PECL extension statically into your PHP binary. To do this, you'll need to place the extension source under the php-src/ext/ directory and tell the PHP build system to regenerate its configure script. $ cd /your/phpsrcdir/ext $ pecl download extname $ gzip -d < extname.tgz | tar -xvf - $ mv extname-x.x.x extname This will result in the following directory: /your/phpsrcdir/ext/extname From here, force PHP to rebuild the configure script, and then build PHP as normal: $ cd /your/phpsrcdir $ rm configure $ ./buildconf --force $ ./configure --help $ ./configure --with-extname --enable-someotherext --with-foobar $ make $ make install Note: To run the 'buildconf' script you need autoconf 2.13 and automake 1.4+ (newer versions of autoconf may work, but are not supported). Whether --enable-extname or --with-extname is used depends on the extension. Typically an extension that does not require external libraries uses --enable. To be sure, run the following after buildconf: $ ./configure --help | grep extname __________________________________________________________________ Chapter 4. Problems? Read the FAQ Some problems are more common than others. The most common ones are listed in the PHP FAQ, part of this manual. __________________________________________________________________ Other problems If you are still stuck, someone on the PHP installation mailing list may be able to help you. You should check out the archive first, in case someone already answered someone else who had the same problem as you. The archives are available from the support page on http://www.php.net/support.php. To subscribe to the PHP installation mailing list, send an empty mail to php-install-subscribe@lists.php.net. The mailing list address is php-install@lists.php.net. If you want to get help on the mailing list, please try to be precise and give the necessary details about your environment (which operating system, what PHP version, what web server, if you are running PHP as CGI or a server module, safe mode, etc...), and preferably enough code to make others able to reproduce and test your problem. __________________________________________________________________ Bug reports If you think you have found a bug in PHP, please report it. The PHP developers probably don't know about it, and unless you report it, chances are it won't be fixed. You can report bugs using the bug-tracking system at http://bugs.php.net/. Please do not send bug reports in mailing list or personal letters. The bug system is also suitable to submit feature requests. Read the How to report a bug document before submitting any bug reports! __________________________________________________________________ Chapter 5. Runtime Configuration The configuration file The configuration file (called php3.ini in PHP 3, and simply php.ini as of PHP 4) is read when PHP starts up. For the server module versions of PHP, this happens only once when the web server is started. For the CGI and CLI version, it happens on every invocation. php.ini is searched in these locations (in order): * SAPI module specific location (PHPIniDir directive in Apache 2, -c command line option in CGI and CLI, php_ini parameter in NSAPI, PHP_INI_PATH environment variable in THTTPD) * The PHPRC environment variable. Before PHP 5.2.0 this was checked after the registry key mentioned below. * As of PHP 5.2.0, the following registry locations are searched in order: HKEY_LOCAL_MACHINE\SOFTWARE\PHP\x.y.z\IniFilePath, HKEY_LOCAL_MACHINE\SOFTWARE\PHP\x.y\IniFilePath and HKEY_LOCAL_MACHINE\SOFTWARE\PHP\x\IniFilePath, where x, y and z mean the PHP major, minor and release versions. * HKEY_LOCAL_MACHINE\SOFTWARE\PHP\IniFilePath (Windows Registry location) * Current working directory (except CLI) * The web server's directory (for SAPI modules), or directory of PHP (otherwise in Windows) * Windows directory (C:\windows or C:\winnt) (for Windows), or --with-config-file-path compile time option If php-SAPI.ini exists (where SAPI is used SAPI, so the filename is e.g. php-cli.ini or php-apache.ini), it's used instead of php.ini. SAPI name can be determined by php_sapi_name(). Note: The Apache web server changes the directory to root at startup causing PHP to attempt to read php.ini from the root filesystem if it exists. The php.ini directives handled by extensions are documented respectively on the pages of the extensions themselves. The list of the core directives is available in the appendix. Probably not all PHP directives are documented in the manual though. For a complete list of directives available in your PHP version, please read your well commented php.ini file. Alternatively, you may find the latest php.ini from SVN helpful too. Example 5-1. php.ini example ; any text on a line after an unquoted semicolon (;) is ignored [php] ; section markers (text within square brackets) are also ignored ; Boolean values can be set to either: ; true, on, yes ; or false, off, no, none html_errors = off track_errors = yes ; you can enclose strings in double-quotes include_path = ".:/usr/local/lib/php" ; backslashes are treated the same as any other character include_path = ".;c:\php\lib" Since PHP 5.1.0, it is possible to refer to existing .ini variables from within .ini files. Example: open_basedir = ${open_basedir} ":/new/dir". __________________________________________________________________ How to change configuration settings Running PHP as an Apache module When using PHP as an Apache module, you can also change the configuration settings using directives in Apache configuration files (e.g. httpd.conf) and .htaccess files. You will need "AllowOverride Options" or "AllowOverride All" privileges to do so. With PHP 4 and PHP 5, there are several Apache directives that allow you to change the PHP configuration from within the Apache configuration files. For a listing of which directives are PHP_INI_ALL, PHP_INI_PERDIR, or PHP_INI_SYSTEM, have a look at the List of php.ini directives appendix. Note: With PHP 3, there are Apache directives that correspond to each configuration setting in the php3.ini name, except the name is prefixed by "php3_". php_value name value Sets the value of the specified directive. Can be used only with PHP_INI_ALL and PHP_INI_PERDIR type directives. To clear a previously set value use none as the value. Note: Don't use php_value to set boolean values. php_flag (see below) should be used instead. php_flag name on|off Used to set a boolean configuration directive. Can be used only with PHP_INI_ALL and PHP_INI_PERDIR type directives. php_admin_value name value Sets the value of the specified directive. This can not be used in .htaccess files. Any directive type set with php_admin_value can not be overridden by .htaccess or virtualhost directives. To clear a previously set value use none as the value. php_admin_flag name on|off Used to set a boolean configuration directive. This can not be used in .htaccess files. Any directive type set with php_admin_flag can not be overridden by .htaccess or virtualhost directives. Example 5-2. Apache configuration example php_value include_path ".:/usr/local/lib/php" php_admin_flag engine on Caution PHP constants do not exist outside of PHP. For example, in httpd.conf you can not use PHP constants such as E_ALL or E_NOTICE to set the error_reporting directive as they will have no meaning and will evaluate to 0. Use the associated bitmask values instead. These constants can be used in php.ini __________________________________________________________________ Changing PHP configuration via the Windows registry When running PHP on Windows, the configuration values can be modified on a per-directory basis using the Windows registry. The configuration values are stored in the registry key HKLM\SOFTWARE\PHP\Per Directory Values, in the sub-keys corresponding to the path names. For example, configuration values for the directory c:\inetpub\wwwroot would be stored in the key HKLM\SOFTWARE\PHP\Per Directory Values\c\inetpub\wwwroot. The settings for the directory would be active for any script running from this directory or any subdirectory of it. The values under the key should have the name of the PHP configuration directive and the string value. PHP constants in the values are not parsed. However, only configuration values changeable in PHP_INI_USER can be set this way, PHP_INI_PERDIR values can not. __________________________________________________________________ Other interfaces to PHP Regardless of how you run PHP, you can change certain values at runtime of your scripts through ini_set(). See the documentation on the ini_set() page for more information. If you are interested in a complete list of configuration settings on your system with their current values, you can execute the phpinfo() function, and review the resulting page. You can also access the values of individual configuration directives at runtime using ini_get() or get_cfg_var(). __________________________________________________________________ Chapter 6. Installation FAQ This section holds common questions about the way to install PHP. PHP is available for almost any OS (except maybe for MacOS before OSX), and almost any web server. To install PHP, follow the instructions in Installing PHP. 1. Why shouldn't I use Apache2 with a threaded MPM in a production environment? 2. Unix/Windows: Where should my php.ini file be located? 3. Unix: I installed PHP, but every time I load a document, I get the message 'Document Contains No Data'! What's going on here? 4. Unix: I installed PHP using RPMS, but Apache isn't processing the PHP pages! What's going on here? 5. Unix: I installed PHP 3 using RPMS, but it doesn't compile with the database support I need! What's going on here? 6. Unix: I patched Apache with the FrontPage extensions patch, and suddenly PHP stopped working. Is PHP incompatible with the Apache FrontPage extensions? 7. Unix/Windows: I have installed PHP, but when I try to access a PHP script file via my browser, I get a blank screen. 8. Unix/Windows: I have installed PHP, but when try to access a PHP script file via my browser, I get a server 500 error. 9. Some operating systems: I have installed PHP without errors, but when I try to start apache I get undefined symbol errors: [mybox:user /src/php5] root# apachectl configtest apachectl: /usr/local/apache/bin/httpd Undefined symbols: _compress _uncompress 10. Windows: I have installed PHP, but when I to access a PHP script file via my browser, I get the error: cgi error: The specified CGI application misbehaved by not returning a complete set of HTTP headers. The headers it did return are: 11. Windows: I've followed all the instructions, but still can't get PHP and IIS to work together! 12. When running PHP as CGI with IIS, OmniHTTPD or Xitami, I get the following error: Security Alert! PHP CGI cannot be accessed directly.. 13. How do I know if my php.ini is being found and read? It seems like it isn't as my changes aren't being implemented. 14. How do I add my PHP directory to the PATH on Windows? 15. How do I make the php.ini file available to PHP on windows? 16. Is it possible to use Apache content negotiation (MultiViews option) with PHP? 17. Is PHP limited to process GET and POST request methods only? 1. Why shouldn't I use Apache2 with a threaded MPM in a production environment? PHP is glue. It is the glue used to build cool web applications by sticking dozens of 3rd-party libraries together and making it all appear as one coherent entity through an intuitive and easy to learn language interface. The flexibility and power of PHP relies on the stability and robustness of the underlying platform. It needs a working OS, a working web server and working 3rd-party libraries to glue together. When any of these stop working PHP needs ways to identify the problems and fix them quickly. When you make the underlying framework more complex by not having completely separate execution threads, completely separate memory segments and a strong sandbox for each request to play in, feet of clay are introduced into PHP's system. If you feel you have to use a threaded MPM, look at a FastCGI configuration where PHP is running in its own memory space. And finally, this warning against using a threaded MPM is not as strong for Windows systems because most libraries on that platform tend to be threadsafe. 2. Unix/Windows: Where should my php.ini file be located? By default on Unix it should be in /usr/local/lib which is /lib. Most people will want to change this at compile-time with the --with-config-file-path flag. You would, for example, set it with something like: --with-config-file-path=/etc And then you would copy php.ini-production from the distribution to /etc/php.ini and edit it to make any local changes you want. --with-config-file-scan-dir=PATH On Windows the default path for the php.ini file is the Windows directory. If you're using the Apache webserver, php.ini is first searched in the Apaches install directory, e.g. c:\program files\apache group\apache. This way you can have different php.ini files for different versions of Apache on the same machine. See also the chapter about the configuration file. 3. Unix: I installed PHP, but every time I load a document, I get the message 'Document Contains No Data'! What's going on here? This probably means that PHP is having some sort of problem and is core-dumping. Look in your server error log to see if this is the case, and then try to reproduce the problem with a small test case. If you know how to use 'gdb', it is very helpful when you can provide a backtrace with your bug report to help the developers pinpoint the problem. If you are using PHP as an Apache module try something like: * Stop your httpd processes * gdb httpd * Stop your httpd processes * > run -X -f /path/to/httpd.conf * Then fetch the URL causing the problem with your browser * > run -X -f /path/to/httpd.conf * If you are getting a core dump, gdb should inform you of this now * type: bt * You should include your backtrace in your bug report. This should be submitted to http://bugs.php.net/ If your script uses the regular expression functions (ereg() and friends), you should make sure that you compiled PHP and Apache with the same regular expression package. This should happen automatically with PHP and Apache 1.3.x 4. Unix: I installed PHP using RPMS, but Apache isn't processing the PHP pages! What's going on here? Assuming you installed both Apache and PHP from RPM packages, you need to uncomment or add some or all of the following lines in your httpd.conf file: # Extra Modules AddModule mod_php.c AddModule mod_php3.c AddModule mod_perl.c # Extra Modules LoadModule php_module modules/mod_php.so LoadModule perl_module modules/libperl.so And add: AddType application/x-httpd-php3 .php3 # for PHP 3 AddType application/x-httpd-php .php # for PHP 4 ... to the global properties, or to the properties of the VirtualDomain you want to have PHP support added to. 5. Unix: I installed PHP 3 using RPMS, but it doesn't compile with the database support I need! What's going on here? Due to the way PHP 3 built, it is not easy to build a complete flexible PHP RPM. This issue is addressed in PHP 4. For PHP 3, we currently suggest you use the mechanism described in the INSTALL.REDHAT file in the PHP distribution. If you insist on using an RPM version of PHP 3, read on... The RPM packagers are setting up the RPMS to install without database support to simplify installations and because RPMS use /usr/ instead of the standard /usr/local/ directory for files. You need to tell the RPM spec file which databases to support and the location of the top-level of your database server. This example will explain the process of adding support for the popular MySQL database server, using the mod installation for Apache. Of course all of this information can be adjusted for any database server that PHP supports. We will assume you installed MySQL and Apache completely with RPMS for this example as well. * First remove mod_php3 : rpm -e mod_php3 * Then get the source rpm and INSTALL it, NOT --rebuild rpm -Uvh mod_php3-3.0.5-2.src.rpm * Then edit the /usr/src/redhat/SPECS/mod_php3.spec file In the %build section add the database support you want, and the path. For MySQL you would add --with-mysql=/usr The %build section will look something like this: ./configure --prefix=/usr \ --with-apxs=/usr/sbin/apxs \ --with-config-file-path=/usr/lib \ --enable-debug=no \ --enable-safe-mode \ --with-exec-dir=/usr/bin \ --with-mysql=/usr \ --with-system-regex * Once this modification is made then build the binary rpm as follows: rpm -bb /usr/src/redhat/SPECS/mod_php3.spec * Then install the rpm rpm -ivh /usr/src/redhat/RPMS/i386/mod_php3-3.0.5-2.i386.rpm Make sure you restart Apache, and you now have PHP 3 with MySQL support using RPM's. Note that it is probably much easier to just build from the distribution tarball of PHP 3 and follow the instructions in INSTALL.REDHAT found in that distribution. 6. Unix: I patched Apache with the FrontPage extensions patch, and suddenly PHP stopped working. Is PHP incompatible with the Apache FrontPage extensions? No, PHP works fine with the FrontPage extensions. The problem is that the FrontPage patch modifies several Apache structures, that PHP relies on. Recompiling PHP (using 'make clean ; make') after the FP patch is applied would solve the problem. 7. Unix/Windows: I have installed PHP, but when I try to access a PHP script file via my browser, I get a blank screen. Do a 'view source' in the web browser and you will probably find that you can see the source code of your PHP script. This means that the web server did not send the script to PHP for interpretation. Something is wrong with the server configuration - double check the server configuration against the PHP installation instructions. 8. Unix/Windows: I have installed PHP, but when try to access a PHP script file via my browser, I get a server 500 error. Something went wrong when the server tried to run PHP. To get to see a sensible error message, from the command line, change to the directory containing the PHP executable (php.exe on Windows) and run php -i. If PHP has any problems running, then a suitable error message will be displayed which will give you a clue as to what needs to be done next. If you get a screen full of HTML codes (the output of the phpinfo() function) then PHP is working, and your problem may be related to your server configuration which you should double check. 9. Some operating systems: I have installed PHP without errors, but when I try to start apache I get undefined symbol errors: [mybox:user /src/php5] root# apachectl configtest apachectl: /usr/local/apache/bin/httpd Undefined symbols: _compress _uncompress This has actually nothing to do with PHP, but with the MySQL client libraries. Some need --with-zlib, others do not. This is also covered in the MySQL FAQ. 10. Windows: I have installed PHP, but when I to access a PHP script file via my browser, I get the error: cgi error: The specified CGI application misbehaved by not returning a complete set of HTTP headers. The headers it did return are: This error message means that PHP failed to output anything at all. To get to see a sensible error message, from the command line, change to the directory containing the PHP executable (php.exe on Windows) and run php -i. If PHP has any problems running, then a suitable error message will be displayed which will give you a clue as to what needs to be done next. If you get a screen full of HTML codes (the output of the phpinfo() function) then PHP is working. Once PHP is working at the command line, try accessing the script via the browser again. If it still fails then it could be one of the following: * File permissions on your PHP script, php.exe, php5ts.dll, php.ini or any PHP extensions you are trying to load are such that the anonymous internet user ISUR_ cannot access them. * The script file does not exist (or possibly isn't where you think it is relative to your web root directory). Note that for IIS you can trap this error by ticking the 'check file exists' box when setting up the script mappings in the Internet Services Manager. If a script file does not exist then the server will return a 404 error instead. There is also the additional benefit that IIS will do any authentication required for you based on the NTLanMan permissions on your script file. 11. Windows: I've followed all the instructions, but still can't get PHP and IIS to work together! Make sure any user who needs to run a PHP script has the rights to run php.exe! IIS uses an anonymous user which is added at the time IIS is installed. This user needs rights to php.exe. Also, any authenticated user will also need rights to execute php.exe. And for IIS4 you need to tell it that PHP is a script engine. Also, you will want to read this faq. 12. When running PHP as CGI with IIS, OmniHTTPD or Xitami, I get the following error: Security Alert! PHP CGI cannot be accessed directly.. You must set the cgi.force_redirect directive to 0. It defaults to 1 so be sure the directive isn't commented out (with a ;). Like all directives, this is set in php.ini Because the default is 1, it's critical that you're 100% sure that the correct php.ini file is being read. Read this faq for details. 13. How do I know if my php.ini is being found and read? It seems like it isn't as my changes aren't being implemented. To be sure your php.ini is being read by PHP, make a call to phpinfo() and near the top will be a listing called Configuration File (php.ini). This will tell you where PHP is looking for php.ini and whether or not it's being read. If just a directory PATH exists than it's not being read and you should put your php.ini in that directory. If php.ini is included within the PATH than it is being read. If php.ini is being read and you're running PHP as a module, then be sure to restart your web server after making changes to php.ini 14. How do I add my PHP directory to the PATH on Windows? On Windows NT, 2000, XP and 2003: * Go to Control Panel and open the System icon (Start -> Settings -> Control Panel -> System, or just Start -> Control Panel -> System for Windows XP/2003) * Go to the Advanced tab * Click on the 'Environment Variables' button * Look into the 'System Variables' pane * Find the Path entry (you may need to scroll to find it) * Double click on the Path entry * Enter your PHP directory at the end, including ';' before (e.g. ;C:\php) * Press OK and restart your computer On Windows 98/Me you need to edit the autoexec.bat file: * Open the Notepad (Start -> Run and enter notepad) * Open the C:\autoexec.bat file * Locate the line with PATH=C:\WINDOWS;C:\WINDOWS\COMMAND;..... and add: ;C:\php to the end of the line * Save the file and restart your computer Note: Be sure to reboot after following the steps above to ensure that the PATH changes are applied. The PHP manual used to promote the copying of files into the Windows system directory, this is because this directory (C:\Windows, C:\WINNT, etc.) is by default in the systems PATH. Copying files into the Windows system directory has long since been deprecated and may cause problems. 15. How do I make the php.ini file available to PHP on windows? There are several ways of doing this. If you are using Apache, read their installation specific instructions (Apache 1, Apache 2), otherwise you must set the PHPRC environment variable: On Windows NT, 2000, XP and 2003: * Go to Control Panel and open the System icon (Start -> Settings -> Control Panel -> System, or just Start -> Control Panel -> System for Windows XP/2003) * Go to the Advanced tab * Click on the 'Environment Variables' button * Look into the 'System variables' pane * Click on 'New' and enter 'PHPRC' as the variable name and the directory where php.ini is located as the variable value (e.g. C:\php) * Press OK and restart your computer On Windows 98/Me you need to edit the autoexec.bat file: * Open the Notepad (Start -> Run and enter notepad) * Open the C:\autoexec.bat file * Add a new line to the end of the file: set PHPRC=C:\php (replace C:\php with the directory where php.ini is located). Please note that the path cannot contain spaces. For instance, if you have installed PHP in C:\Program Files\PHP, you would enter C:\PROGRA~1\PHP instead. * Save the file and restart your computer 16. Is it possible to use Apache content negotiation (MultiViews option) with PHP? If links to PHP files include extension, everything works perfect. This FAQ is only for the case when links to PHP files don't include extension and you want to use content negotiation to choose PHP files from URL with no extension. In this case, replace the line AddType application/x-httpd-php .php with: # PHP 4 AddHandler php-script php AddType text/html php # PHP 5 AddHandler php5-script php AddType text/html php This solution doesn't work for Apache 1 as PHP module doesn't catch php-script. 17. Is PHP limited to process GET and POST request methods only? No, it is possible to handle any request method, e.g. CONNECT. Proper response status can be sent with header(). If only GET and POST methods should be handled, it can be achieved with this Apache configuration: Deny from all