apps: Don't include progs.h in apps.h

Everything in apps includes apps.h, because that one declares apps
internal library routines. However, progs.h doesn't declare library
routines

apps: Don't include progs.h in apps.h

Everything in apps includes apps.h, because that one declares apps
internal library routines. However, progs.h doesn't declare library
routines, but rather the main commands and their options, and there's
no reason why the library modules should include it.

So, remove the inclusion of progs.h from apps.h and add that inclusion
in all command source files.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5222)

show more ...

Support public key and param check in EVP interface

EVP_PKEY_public_check() and EVP_PKEY_param_check()

Doc and test cases are added

Reviewed-by: Tim Hudson <tjh@openssl.org

Support public key and param check in EVP interface

EVP_PKEY_public_check() and EVP_PKEY_param_check()

Doc and test cases are added

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4647)

show more ...

Fix typo in comment

The peek result is now called 'err', not just 'e'.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4362)

Support key check in EVP interface

A new method is added to EVP_PKEY_METH as:

int (*check) (EVP_PKEY_CTX *ctx);

and to EVP_PKEY_ASN1_METHOD as:

int (*pkey_

Support key check in EVP interface

A new method is added to EVP_PKEY_METH as:

int (*check) (EVP_PKEY_CTX *ctx);

and to EVP_PKEY_ASN1_METHOD as:

int (*pkey_check) (EVP_PKEY_CTX *ctx);

This is used to check the validity of a specific key.

The order of calls is:
EVP_PKEY_check -> pmeth.check -> ameth.pkey_check.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4337)

show more ...

Clean up a bundle of codingstyle stuff in apps directory

Mostly braces and NULL pointer check and also copyright year bump

Signed-off-by: Paul Yang <paulyang.inf@gmail.com>

Clean up a bundle of codingstyle stuff in apps directory

Mostly braces and NULL pointer check and also copyright year bump

Signed-off-by: Paul Yang <paulyang.inf@gmail.com>

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3657)

show more ...

print errors in pkey utility

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)

If an engine comes up explicitely, it must also come down explicitely

In apps/apps.c, one can set up an engine with setup_engine().
However, we freed the structural reference immediately

If an engine comes up explicitely, it must also come down explicitely

In apps/apps.c, one can set up an engine with setup_engine().
However, we freed the structural reference immediately, which means
that for engines that don't already have a structural reference
somewhere else (because it's a built in engine), we end up returning
an invalid reference.

Instead, the function release_engine() is added, and called at the end
of the routines that call setup_engine().

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1643)

show more ...

Constify command options

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from ht

Constify command options

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1694)

show more ...

Support for traditional format private keys.

Add new function PEM_write_bio_PrivateKey_traditional() to enforce the
use of legacy "traditional" private key format. Add -traditional optio

Support for traditional format private keys.

Add new function PEM_write_bio_PrivateKey_traditional() to enforce the
use of legacy "traditional" private key format. Add -traditional option
to pkcs8 and pkey utilities.

Reviewed-by: Matt Caswell <matt@openssl.org>

show more ...

Copyright consolidation 01/10

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>

Restore support for ENGINE format keys in apps.

RT#4207

Reviewed-by: Tim Hudson <tjh@openssl.org>

argv was set but unused

Also gives an error message when you gave it a parameter it didn't expect.

Reviewed-by: Rich Salz <rsalz@openssl.org>

MR: #2009

Fix engine key support in utilities.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Avoid erroneous "assert(private)" failures.

When processing a public key input via "-pubin", "private" was
sometimes erroneously set, or else not set and incorrectly asserted.

R

Avoid erroneous "assert(private)" failures.

When processing a public key input via "-pubin", "private" was
sometimes erroneously set, or else not set and incorrectly asserted.

Reviewed-by: Rich salz <rsalz@openssl.org>

show more ...

Centralise loading default apps config file

Loading the config file after processing command line options can
cause problems, e.g. where an engine provides new ciphers/digests
these

Centralise loading default apps config file

Loading the config file after processing command line options can
cause problems, e.g. where an engine provides new ciphers/digests
these are not then recoginised on the command line. Move the
default config file loading to before the command line option
processing. Whilst we're doing this we might as well centralise
this instead of doing it individually for each application. Finally
if we do it before the OpenSSL_add_ssl_algorithms() call then
ciphersuites provided by an engine (e.g. GOST) can be available to
the apps.

RT#4085
RT#4086

Reviewed-by: Richard Levitte <levitte@openssl.org>

show more ...

Change the way apps open their input and output files

The different apps had the liberty to decide whether they would open their
input and output files in binary mode or not, which could

Change the way apps open their input and output files

The different apps had the liberty to decide whether they would open their
input and output files in binary mode or not, which could be confusing if
two different apps were handling the same type of file in different ways.

The solution is to centralise the decision of low level file organisation,
and that the apps would use a selection of formats to state the intent of
the file.

Reviewed-by: Tim Hudson <tjh@openssl.org>

show more ...

Make the handling of output and input formats consistent

Most of all, we needed to sort out which ones are binary and which
ones are text, and make sure they are treated accordingly and

Make the handling of output and input formats consistent

Most of all, we needed to sort out which ones are binary and which
ones are text, and make sure they are treated accordingly and
consistently so

Reviewed-by: Tim Hudson <tjh@openssl.org>

show more ...

RT2547: Tighten perms on generated privkey files

When generating a private key, try to make the output file be readable
only by the owner. Put it in CHANGES file since it might be notic

RT2547: Tighten perms on generated privkey files

When generating a private key, try to make the output file be readable
only by the owner. Put it in CHANGES file since it might be noticeable.

Add "int private" flag to apps that write private keys, and check that it's
set whenever we do write a private key. Checked via assert so that this
bug (security-related) gets fixed. Thanks to Viktor for help in tracing
the code-paths where private keys are written.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

show more ...

Restore module loading

The module loading feature got broken a while ago, so restore it, but
have it a bit more explicit this time around.

Reviewed-by: Stephen Henson <steve@ope

Restore module loading

The module loading feature got broken a while ago, so restore it, but
have it a bit more explicit this time around.

Reviewed-by: Stephen Henson <steve@openssl.org>

show more ...

free null cleanup finale

Don't check for NULL before calling OPENSSL_free

Reviewed-by: Richard Levitte <levitte@openssl.org>

fewer NO_ENGINE #ifdef's

Make setup_engine be a dummy if NO_ENGINE is enabled.
The option is not enabled if NO_ENGINE is enabled, so the one "wasted"
variable just sits there. Remove

fewer NO_ENGINE #ifdef's

Make setup_engine be a dummy if NO_ENGINE is enabled.
The option is not enabled if NO_ENGINE is enabled, so the one "wasted"
variable just sits there. Removes some variables and code.

Reviewed-by: Richard Levitte <levitte@openssl.org>

show more ...

Big apps cleanup (option-parsing, etc)

This is merges the old "rsalz-monolith" branch over to master. The biggest
change is that option parsing switch from cascasding 'else if strcmp("-

Big apps cleanup (option-parsing, etc)

This is merges the old "rsalz-monolith" branch over to master. The biggest
change is that option parsing switch from cascasding 'else if strcmp("-foo")'
to a utility routine and somethin akin to getopt. Also, an error in the
command line no longer prints the full summary; use -help (or --help :)
for that. There have been many other changes and code-cleanup, see
bullet list below.

Special thanks to Matt for the long and detailed code review.

TEMPORARY:
For now, comment out CRYPTO_mem_leaks() at end of main

Tickets closed:
RT3515: Use 3DES in pkcs12 if built with no-rc2
RT1766: s_client -reconnect and -starttls broke
RT2932: Catch write errors
RT2604: port should be 'unsigned short'
RT2983: total_bytes undeclared #ifdef RENEG
RT1523: Add -nocert to fix output in x509 app
RT3508: Remove unused variable introduced by b09eb24
RT3511: doc fix; req default serial is random
RT1325,2973: Add more extensions to c_rehash
RT2119,3407: Updated to dgst.pod
RT2379: Additional typo fix
RT2693: Extra include of string.h
RT2880: HFS is case-insensitive filenames
RT3246: req command prints version number wrong

Other changes; incompatibilities marked with *:
Add SCSV support
Add -misalign to speed command
Make dhparam, dsaparam, ecparam, x509 output C in proper style
Make some internal ocsp.c functions void
Only display cert usages with -help in verify
Use global bio_err, remove "BIO*err" parameter from functions
For filenames, - always means stdin (or stdout as appropriate)
Add aliases for -des/aes "wrap" ciphers.
*Remove support for IISSGC (server gated crypto)
*The undocumented OCSP -header flag is now "-header name=value"
*Documented the OCSP -header flag

Reviewed-by: Matt Caswell <matt@openssl.org>

show more ...

Run util/openssl-format-source -v -c .

Reviewed-by: Tim Hudson <tjh@openssl.org>

Update obsolete email address...

New utility pkeyparam. Enhance and bugfix algorithm specific parameter
functions to support it.